EN IEC 61753-081-06:2023

SLOVENSKI STANDARD
01-februar-2024
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 081-06. del:
Električno krmiljeni spremenljivi optični atenuator srednje obsežne naprave 1 x N
DWDM brez konektorjev za enorodovna vlakna kategorije OP+ - Razširjeno
zunanje zaščiteno okolje (IEC 61753-081-06:2023)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM
devices for category OP+ - Extended outdoor protected environment (IEC 61753-081-
06:2023)
Lichtwellenleiter – Verbindungselemente und passive Bauteile – Betriebsverhalten – Teil
081-06: Nicht mit Steckverbindern versehene mittelgroße Einmoden-Lichtwellenleiter-1 x
N-DWDM-Bauteile für die Kategorie OP+ – Freiluft, geschützte Umgebung, erweitert
(IEC 61753-081-06:2023)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 081-06: Dispositifs DWDM 1 × N de milieu d’échelle à fibres optiques unimodales,
non connectorisés, pour catégorie OP+ - Environnement extérieur protégé étendu (IEC
61753-081-06:2023)
Ta slovenski standard je istoveten z: EN IEC 61753-081-06:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61753-081-06

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 33.180.10
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 081-06: Non-connectorized single-
mode fibre optic middle-scale 1 x N DWDM devices for category
OP+ - Extended outdoor protected environment
(IEC 61753-081-06:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 081-06 : Bauteile - Betriebsverhalten - Teil 081-06: Nicht mit
Dispositifs DWDM 1 × N de milieu d'échelle fibroniques Steckverbindern versehene mittelgroße Einmoden-
unimodaux, non connecteurisés, pour catégorie OP+ - Lichtwellenleiter-1 x N-DWDM-Bauteile für die Kategorie
Environnement extérieur protégé étendu OP+ - Freiluft, geschützte Umgebung, erweitert
(IEC 61753-081-06:2023) (IEC 61753-081-06:2023)
This European Standard was approved by CENELEC on 2023-12-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-081-06:2023 E

European foreword
The text of document 86B/4804/FDIS, future edition 1 of IEC 61753-081-06, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-081-
06:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-21
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61753-081-06:2023 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
cables - Family specification for simplex
and duplex cables for use in terminated
cable assemblies
IEC 61300-1 - Fibre optic interconnecting devices and EN IEC 61300-1 -
passive components - Basic test and
measurement procedures - Part 1: General
and guidance
IEC 61300 series Fibre optic interconnecting devices and EN IEC 61300 series
passive components - Basic test and
measurement procedures
IEC 61300-2-1 - Fibre optic interconnecting devices and EN IEC 61300-2-1 -
passive components - Basic test and
measurement procedures - Part 2-1: Tests
- Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices and EN IEC 61300-2-5 -
passive components - Basic test and
measurement procedures - Part 2-5: Tests
- Torsion
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures - Part 2-9: Tests
- Shock
IEC 61300-2-14 - Fibre optic interconnecting devices and EN IEC 61300-2-14 -
passive components - Basic test and
measurement procedures - Part 2-14:
Tests - High optical power
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures - Part 2-17:
Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN IEC 61300-2-18 -
passive components - Basic test and
measurement procedures - Part 2-18:
Tests - Dry heat
IEC 61300-2-21 - Fibre optic interconnecting devices and EN 61300-2-21 -
passive components - Basic test and
measurement procedures - Part 2-21:
Tests - Composite temperature/humidity
cyclic test
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures - Part 2-22:
Tests - Change of temperature
IEC 61300-2-26 - Fibre optic interconnecting devices and EN IEC 61300-2-26 -
passive components - Basic test and
measurement procedures - Part 2-26:
Tests - Salt mist
IEC 61300-2-27 - Fibre optic interconnecting devices and EN 61300-2-27 -
passive components - Basic test and
measurement procedures - Part 2-27:
Tests - Dust - Laminar flow
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures - Part 2-44:
Tests - Flexing of the strain relief of fibre
optic devices
IEC 61300-3-2 - Fibre optic interconnecting devices and EN 61300-3-2 -
passive components - Basic test and
measurement procedures - Part 3-2:
Examination and measurements -
Polarization dependent loss in a single-
mode fibre optic device
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures - Part 3-6:
Examinations and measurements - Return
loss
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures - Part 3-20:
Examinations and measurements -
Directivity of fibre optic branching devices
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures - Part 3-28:
Examinations and measurements -
Transient loss
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 -
passive components - Basic test and
measurement procedures - Part 3-29:
Examinations and measurements -
Spectral transfer characteristics of DWDM
devices
IEC 61300-3-32 - Fibre optic interconnecting devices and EN 61300-3-32 -
passive components - Basic test and
measurement procedures - Part 3-32:
Examinations and measurements -
Polarization mode dispersion
measurement for passive optical
components
IEC 61300-3-38 - Fibre optic interconnecting devices and EN 61300-3-38 -
passive components - Basic test and
measurement procedures - Part 3-38:
Examinations and measurements - Group
delay, chromatic dispersion and phase
ripple
IEC 61753-1 - Fibre optic interconnecting devices and EN IEC 61753-1 -
passive components - Performance
standard - Part 1: General and guidance
IEC 61753-081-02 - Fibre optic interconnecting devices and EN IEC 61753-081--
passive components - Performance 02
standard - Part 081-02: Non-connectorized
single-mode fibre optic middle-scale 1 x N
DWDM devices for category C - Controlled
environments
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices - Part 1: Generic specification
IEC/TS 62627-09 - Fibre optic interconnecting devices and - -
passive components - Vocabulary for
passive optical devices
IEC 61753-081-06 ®
Edition 1.0 2023-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 × N

DWDM devices for category OP+ – Extended outdoor protected environment

Dispositifs d'interconnexion et composants passifs fibroniques – Norme de

performance –
Partie 081-06: Dispositifs DWDM 1 × N de milieu d'échelle fibroniques

unimodaux, non connectorisés, pour catégorie OP+ – Environnement extérieur

protégé étendu
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10  ISBN 978-2-8322-7845-1

– 2 – IEC 61753-081-06:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Test . 7
5 Test report . 8
6 Performance requirements. 8
6.1 Reference components . 8
6.2 Dimensions . 8
6.3 Sample size . 8
6.4 Test details and requirements . 8
Annex A (normative) Sample size . 17
Bibliography . 18

Table 1 – Single-mode spectral bands . 7
Table 2 – Test details and requirements for type A (Gaussian passba
...