Fibre optic interconnecting devices and passive components - Performance standard - Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category U - Uncontrolled environment

IEC 61753-031-2:2014(E) contains the minimum initial tests and measurement requirements and severities which a non-wavelength selective branching device (NWBD) should satisfy in order to be categorized as meeting the requirement of this IEC standard. The requirements cover balanced bidirectional non-connectorized single-mode 1xN and 2xN non wavelength-selective branching devices for use in an IEC Category C environment (N is the number of branching ports), especially but not exclusively used for PON application. For balanced NWBD two attenuation and uniformity performance classes are considered: - class A (premium class) which meets more restrictive requirements (i.e. for extended reach PON application) and - class B (standard class) for standard application (i.e. normal reach PON application). The requirements also cover unbalanced bidirectional non-connectorized single-mode, non-wavelength-selective branching devices; however, the specifications of unbalanced branching devices are limited to 1x2 and 2x2 devices because they are the most commonly used. Keywords: non-wavelength selective branching device (NWBD), IEC Category C environment

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 031-3: Nicht mit Steckverbindern versehene wellenlängenunabhängige Einmoden - 1xN und 2xN - Verzweiger für die Kategorie U - Unkontrollierte Umgebung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 031-3: Dispositifs de couplage indépendants de la longueur d’onde 1xN et 2xN en unimodal, non-connectorisés, pour catégorie U - Environnement non contrôlé

L'IEC 61753-031-3:2014 contient les exigences et les sévérités initiales minimales d'essais et de mesures auxquelles il convient qu'un dispositif de couplage indépendant de la longueur d'onde (NWBD) satisfasse afin d'être classé comme conforme à la présente norme. Ces exigences couvrent les dispositifs de couplage 1xN et 2xN en unimodal, non connectorisés, bidirectionnels symétriques destinés à être utilisés dans un environnement de catégorie U selon l'IEC (N correspond au nombre de ports de connexion), utilisés en particulier, mais pas de manière exclusive, pour les applications PON. Dans le cas des NWBD symétriques, deux classes d'affaiblissement et d'uniformité sont prises en compte: - La classe A (classe de première qualité) qui satisfait aux exigences les plus restrictives (à savoir pour les applications PON étendues) et - la classe B (classe normale) pour les applications normales (à savoir par exemple les applications PON d'étendue normale). Ces exigences couvrent aussi les dispositifs de couplage indépendants de la longueur d'onde en unimodal non-connectorisés bidirectionnels asymétriques; toutefois les spécifications des dispositifs de couplage asymétriques sont limitées aux dispositifs 1 x 2 et 2 x 2 car ce sont eux qui sont les plus couramment utilisés. Cette deuxième édition de l'IEC 61753-031-3 annule et remplace la première édition parue en 2009 et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - domaine d'application mis à jour et étendu pour rendre compte de l'introduction de deux classes de performances d'affaiblissement et d'uniformité pour les NWBD symétriques à la place des technologies des dispositifs de couplage du marché; - liste des références normatives mise à jour; - introduction simplifiée aux deux types de bandes spectrales; - Article 5, Exigences de performances, mis à jour et étendu pour rendre compte de l'introduction de deux classes de performances d'affaiblissement et d'uniformité pour les NWBD symétriques; - simplification des essais pour exclure les essais de chaleur humide (état continu) et de chocs pour les exigences de performances; - modification de l'Annexe A pour introduire les exigences calculées et minimales pour l'affaiblissement et l'uniformité; - mise à jour de l'Annexe B pour rendre compte de la révision des exigences de performances. Mots clés: dispositif de couplage indépendant de la longueur d'onde (NWBD), environnement de catégorie U de l'IEC

Optični spojni elementi in pasivne komponente - Tehnični standard - 031-3. del: Enorodni 1xN in 2xN nevalovno dolžinski selektivni optični sklopniki brez konektorjev za kategorijo U - Nenadzorovano okolje (IEC 61753-031-3:2014)

Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora izpolnjevati valovnodolžinsko neodvisni selektivni razvejilni element (NWBD), da ustreza zahtevam tega standarda.
Zahteve zajemajo uravnotežene dvosmerne enorodne valovnodolžinsko neodvisne selektivne razvejilne elemente 1 × N in
2 × N brez konektorjev za uporabo v okolju kategorije IEC U
(N je število razvejilnih vrat), ki se še posebej uporabljajo za PON, vendar ne izključno.
Za uravnotežene nevalovno dolžinske selektivne optične sklopnike sta obravnavana dva kakovostna razreda slabljenja in enotnosti:
razred A (premium razred), ki izpolnjuje strožje zahteve (tj. PON
z razširjenim dosegom), in razred B (standardni razred) za standardno uporabo (tj. PON
z običajnim dosegom).
Zahteve zajemajo tudi neuravnotežene dvosmerne enorodne nevalovno dolžinske
selektivne optične sklopnike; vendar so specifikacije neuravnoteženih optičnih
sklopnikov omejene na naprave 1 × 2 in 2 × 2, ker se uporabljajo najpogosteje.

General Information

Status
Published
Publication Date
12-Mar-2015
Withdrawal Date
19-Jan-2016
Current Stage
6060 - Document made available - Publishing
Start Date
13-Mar-2015
Completion Date
13-Mar-2015

Relations

Buy Standard

Standard
EN 61753-031-3:2015
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2015
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
(QRURGQL[1LQ[1QHYDORYQRGROåLQVNLVHOHNWLYQLRSWLþQLVNORSQLNLEUH]
NRQHNWRUMHY]DNDWHJRULMR81HQDG]RURYDQRRNROMH ,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 031-3: Non-connectorised single-mode 1xN and 2xN non-wavelength-selective
branching devices for Category U - Uncontrolled environment (IEC 61753-031-3:2014)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
031-3: Nicht mit Steckverbindern versehene wellenlängenunabhängige Einmoden - 1xN
und 2xN - Verzweiger für die Kategorie U - Unkontrollierte Umgebung (IEC 61753-031-
3:2014)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de
performance - Partie 031-3: Dispositifs de couplage indépendants de la longueur d'onde
1xN et 2xN en unimodal, non-connectorisés, pour catégorie U - Environnement non
contrôlé (IEC 61753-031-3:2014)
Ta slovenski standard je istoveten z: EN 61753-031-3:2015
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61753-031-3

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 33.180.10 Supersedes EN 61753-031-3:2009
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 031-3: Non-connectorized single-
mode 1×N and 2×N non-wavelength-selective branching devices
for Category U - Uncontrolled environment
(IEC 61753-031-3:2014)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Norme de performance - Partie 031-3: Dispositifs Bauteile - Betriebsverhalten - Teil 031-3: Nicht mit
de couplage indépendants de la longueur d'onde 1xN et Steckverbindern versehene wellenlängenunabhängige
2xN en unimodal, non-connectorisés, pour catégorie U - Einmoden - 1xN und 2xN - Verzweiger für die Kategorie U -
Environnement non contrôlé Unkontrollierte Umgebung
(IEC 61753-031-3:2014) (IEC 61753-031-3:2014)
This European Standard was approved by CENELEC on 2015-01-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61753-031-3:2015 E

Foreword
The text of document 86B/3792/FDIS, future edition 2 of IEC 61753-031-3, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-031-3:2015.
The following dates are fixed:
(dop) 2015-10-20
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2016-01-20
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 61753-031-3:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-031-3:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60875-1 NOTE Harmonized as EN 60875-1.
IEC 61753-1 NOTE Harmonized as EN 61753-1.

- 3 - EN 61753-031-3:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60793-2-50 2012 Optical fibres - EN 60793-2-50 2013
Part 2-50: Product specifications -
Sectional specification for class B single-
mode fibres
IEC 61300-2-1 -  Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 -  Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-5 -  Fibre optic interconnecting devices and EN 61300-2-5 -
passive components - Basic test and
measurement procedures -
Part 2-5: Tests - Torsion
IEC 61300-2-9 -  Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-14 -  Fibre optic interconnecting devices and EN 61300-2-14 -
passive components - Basic test and
measurement procedures -
Part 2-14: Tests - High optical power
IEC 61300-2-17 -  Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 -  Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High
temperature endurance
Publication Year Title EN/HD Year
IEC 61300-2-22 -  Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
IEC 61300-2-42 -  Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for strain
relief
IEC 61300-2-44 -  Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain
relief of fibre optic devices
IEC 61300-2-46 -  Fibre optic interconnecting devices and EN 61300-2-46 -
passive components - Basic test and
measurement procedures -
Part 2-46: Tests - Damp heat cyclic
IEC 61300-3-2 2009 Fibre optic interconnecting devices and EN 61300-3-2 2009
passive components - Basic test and
measurement procedures -
Part 3-2: Examinations and
measurements - Polarization dependent
loss in a single-mode fibre optic device
IEC 61300-3-3 2009 Fibre optic interconnecting devices and EN 61300-3-3 2009
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and
measurements - Active monitoring of
changes in attenuation and return loss
IEC 61300-3-6 2008 Fibre optic interconnecting devices and EN 61300-3-6 2009
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and
measurements - Return loss
IEC 61300-3-7 (mod) 2009 Fibre optic interconnecting devices and EN 61300-3-7 2012
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and
measurements - Wavelength dependence
of attenuation and return loss of single
mode components
IEC 61300-3-20 -  Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and
measurements - Directivity of fibre optic
branching devices
IEC 61300-3-28 -  Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and
measurements - Transient loss
IEC 61753-031-3 ®
Edition 2.0 2014-12
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance

standard –
Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelength-

selective branching devices for Category U – Uncontrolled environment

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.180.10 ISBN 978-2-8322-1819-8

– 2 – IEC 61753-031-3:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Test . 6
4 Test report . 7
5 Performance requirements . 7
5.1 Dimensions . 7
5.2 Sample size . 7
5.3 Test details and requirements . 7
Annex A (normative) A and U requirements of 1 × N and 2 × N NWBDs . 15
A.1 Attenuation and uniformity requirements of 1 × N and 2 × N NWBDs
calculated by the equations of Tests No.1 and 2 . 15
A.2 Minimum requirements at room temperature of attenuation values for
balanced bidirectional 1 × N and 2 × N NWBD . 16
Annex B (normative) Sample size . 18
Bibliography . 19

Table 1 – Test details and requirements . 8
Tableau A.1 – Attenuation and uniformity requirements of balanced bidirectional
NWBD having the most common port configurations for Class A, with the underlying
formulas as specified in the Tests 1 and 2 of Table 1 . 15
Tableau A.2 – Attenuation and uniformity requirements of balanced bidirectional
NWBD having the most common port configurations for Class B, with the underlying
formulas as specified in the Tests 1 and 2 of Table 1 . 16
Tableau A.3 – Attenuation requirements of 1 × 2 and 2 × 2 unbalanced NWBD having
the most common port configurations, with the underlying formula as specified in Test
1 of Table 1 . 16
Tableau A.4 – Minimum requirements at room temperature of attenuation values for
Class A balanced bidirectional NWBD . 17
Tableau A.5 – Minimum requirements at room temperature of attenuation values for

Class B balanced bidirectional NWBD . 17
Table B.1 – Sample size for each test . 18

IEC 61753-031-3:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 031-3: Non-connectorized single-mode 1×N and 2×N
non-wavelength-selective branching devices for Category U –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the ele
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.