EN IEC 62759-1:2022

SLOVENSKI STANDARD
01-november-2022
Nadomešča:
SIST EN 62759-1:2015
Fotonapetostni (PV) moduli - Preskušanje prevoza - 1. del: Prevoz in dobava
pakiranih enot fotonapetostnih modulov
Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping
of module package units
Photovoltaik(PV)-Module - Transportprüfung - Teil 1: Transport und Versand von PV-
Modulpaketen
Modules photovoltaïques (PV) - Essais de transport - Partie 1: Transport et expédition
d'unités d'emballage de modules
Ta slovenski standard je istoveten z: EN IEC 62759-1:2022
ICS:
03.220.99 Druge oblike transporta Other forms of transport
27.160 Sončna energija Solar energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62759-1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2022
ICS 27.160 Supersedes EN 62759-1:2015
English Version
Photovoltaic (PV) modules - Transportation testing - Part 1:
Transportation and shipping of module package units
(IEC 62759-1:2022)
Modules photovoltaïques (PV) - Essais de transport - Photovoltaik (PV)-Module - Transportprüfung - Teil 1:
Partie 1: Transport et expédition d'unités d'emballage de Transport und Versand von PV-Modulpaketen
modules (IEC 62759-1:2022)
(IEC 62759-1:2022)
This European Standard was approved by CENELEC on 2022-08-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62759-1:2022 E

European foreword
The text of document 82/2029/FDIS, future edition 2 of IEC 62759-1, prepared by IEC/TC 82 "Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62759-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-05-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-08-11
document have to be withdrawn
This document supersedes EN 62759-1:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62759-1:2022 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60068-2-64 NOTE Harmonized as EN 60068-2-64
ISO 13355:2016 NOTE Harmonized as EN ISO 13355:2016 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-27 2008 Environmental testing - Part 2-27: Tests - EN 60068-2-27 2009
Test Ea and guidance: Shock
IEC/TS 60904-13 - Photovoltaic devices - Part 13: - -
Electroluminescence of photovoltaic
modules
IEC 61215-1 2021 Terrestrial photovoltaic (PV) modules - EN IEC 61215-1 2021
Design qualification and type approval -
Part 1: Test requirements
IEC 61215-2 2021 Terrestrial photovoltaic (PV) modules - EN IEC 61215-2 2021
Design qualification and type approval -
Part 2: Test procedures
IEC 61730-2 2022 Photovoltaic (PV) module safety qualification EN IEC 61730-2 —
- Part 2: Requirements for testing
IEC/TS 61836 - Solar photovoltaic energy systems - Terms, CLC/TS 61836 -
definitions and symbols
IEC/TS 62782 2016 Photovoltaic (PV) modules - Cyclic - -
(dynamic) mechanical load testing
ASTM D 880-92 - Standard Test Method for Impact Testing for - -
Shipping Containers and Systems
ASTM D 4169-16 - Standard Practice for Performance Testing - -
of Shipping Containers and Systems
ASTM D 4728 2006 Standard Test Method for Random Vibration - -
Testing of Shipping Containers
ASTM D 5277 - Standard Test Method for Performing - -
Programmed Horizontal Impacts Using an
Inclined Impact Tester
ISTA 3E 2017 Unitized Loads of Same Product - -

Under preparation. Stage at the time of publication: prEN IEC 61730-2:2022.
IEC 62759-1 ®
Edition 2.0 2022-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Photovoltaic (PV) modules – Transportation testing –

Part 1: Transportation and shipping of module package units

Modules photovoltaïques (PV) – Essais de transport –

Partie 1: Transport et expédition d'unités d'emballage de modules

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.160 ISBN 978-2-8322-1431-2

– 2 – IEC 62759-1:2022 © IEC 2022
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Sampling . 7
5 Handling . 7
6 Testing procedures . 7
6.1 General . 7
6.2 Measurements . 8
6.3 Transportation testing . 9
6.3.1 General . 9
6.3.2 Random vibration testing . 9
6.3.3 Shock testing . 10
6.4 Environmental stress tests . 11
6.4.1 Path A . 11
6.4.2 Path B . 11
7 Pass criteria . 12
8 Reporting. 12
Annex A (informative) Test profiles . 14
A.1 Overview. 14
A.2 Data points of appropriate PSD test profiles . 14
Annex B (normative) Retesting . 17
B.1 Overview of transportation tests after modification . 17
Bibliography . 19

Figure 1 – Test sequences for PV modules . 8
Figure A.1 – Appropriate PSD test profile. 16

Table A.1 – Severity of common transport test profiles: complete and in range
(1 Hz to 200 Hz) . 14
Table A.2 – ASTM D4169-16 (medium) and ISTA 3E:2017 . 15
Table B.1 – Retests . 17

IEC 62759-1:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PHOTOVOLTAIC (PV) MODULES –
TRANSPORTATION TESTING –
Part 1: Transportation and shipping of module package units

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
...