EN 62341-1-2:2009

SLOVENSKI STANDARD
01-februar-2010
3ULND]RYDOQLNL]RUJDQVNLPLVYHWOHþLPLGLRGDPLGHO7HUPLQRORJLMDLQþUNRYQL
VLPEROL,(&
Organic light emitting diode displays - Part 1-2: Terminology and letter symbols (IEC
62341-1-2:2007)
Anzeigen mit organischen Leuchtdioden - Teil 1-2: Begriffe und Buchstabensymbole
(IEC 62341-1-2:2007)
Afficheurs à diodes électroluminescentes organiques - Partie 1-2: Terminologie et
symboles littéraux (CEI 62341-1-2:2007)
Ta slovenski standard je istoveten z: EN 62341-1-2:2009
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
31.120 Elektronske prikazovalne Electronic display devices
naprave
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62341-1-2
NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM
ICS 31.260
English version
Organic light emitting diode displays -
Part 1-2: Terminology and letter symbols
(IEC 62341-1-2:2007)
Afficheurs à diodes électroluminescentes Anzeigen mit organischen Leuchtdioden -
organiques - Teil 1-2: Begriffe und Buchstabensymbole
Partie 1-2: Terminologie et symboles (IEC 62341-1-2:2007)
littéraux
(CEI 62341-1-2:2007)
This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62341-1-2:2009 E
Foreword
The text of document 110/125/FDIS, future edition 1 of IEC 62341-1-2, prepared by IEC TC 110, Flat
panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 62341-1-2 on 2009-12-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-12-01
__________
Endorsement notice
The text of the International Standard IEC 62341-1-2:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60027 NOTE  Harmonized in EN 60027 series (not modified).
__________
IEC 62341-1-2
Edition 1.0 2007-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Organic light emitting diode displays –
Part 1-2: Terminology and letter symbols

Afficheurs à diodes électroluminescentes organiques –
Partie 1-2: Terminologie et symboles littéraux

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
U
CODE PRIX
ICS 31.260 ISBN 2-8318-9433-6
– 2 – 62341-1-2 © IEC:2007
CONTENTS
FOREWORD.3

1 Scope.5
2 Terms and definitions .5
2.1 Classification of terms .5
2.2 Fundamental terms.5
2.3 Terms related to physical properties.8
2.4 Terms related to constructive elements .11
2.5 Terms related to performances and specifications .15
2.6 Terms related to production process.23
3 Letter symbols (Quantity symbols / Unit symbols).24
3.1 Classification.24
3.2 Letter symbols.24

Annex A (normative) Supplement of term.26

Bibliography.28

Figure A.1 – Pixel Pitch .26
Figure A.2 – Viewing Direction.27

Table 1 – Fundamental symbols .24
Table 2 – Symbols related to physical properties .25
Table 3 – Symbol related to constructive elements .25
Table 4 – Symbols related to performances and specifications .25

62341-1-2 © IEC:2007 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
ORGANIC LIGHT EMITTING DIODE DISPLAYS –

Part 1-2: Terminology and letter symbols

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62341-1-2 has been prepared by IEC technical committee 110:
Flat panel display devices.
The text of this standard is based on the following documents:
FDIS Report on voting
110/125/FDIS 110/132/RVD
Full information on the voting for the approval on this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 62341-1-2 © IEC:2007
A list of all the parts in the IEC 62341 series, under the general title Organic light emitting
diode displays, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
62341-1-2 © IEC:2007 – 5 –
ORGANIC LIGHT EMITTING DIODE DISPLAYS –

Part 1-2: Terminology and letter symbols

1 Scope
This part of IEC 62341 gives preferred terms, their definitions and symbols for organic light
emitting diode (OLED) displays; with the object of using the same terminology when
publications are prepared in different countries.
2 Terms and definitions
For purposes of this document, the following terms and definitions apply.
2.1 Classification of terms
Terms for organic light emitting diode (OLED) displays are classified as follows.
a) Fundamental terms
b) Terms related to physical properties
c) Terms related to constructive elements
d) Terms related to performances and specifications
e) Terms related to production process
2.2 Fundamental terms
2.2.1
active matrix (addressed) driving
matrix driving method in which each pixel or subpixel has at least one active switching (e.g.
diode or transistor) and storage element
2.2.2
addressing method
method of selecting each pixel or subpixel for activation
2.2.3
alphanumeric display
display that is able to show a limited set of characters comprising at least letters and Arabic
numerals
2.2.4
area-colour display
display in which the display panel is partitioned into several parts, each one shows a colour
different from each other
2.2.5
bottom emission
device structure, in which almost all light emitted passes through a substrate on which organic
electroluminescent layers are made

– 6 – 62341-1-2 © IEC:2007
2.2.6
bottom emission display
display using bottom emission structure
2.2.7
constant-current driving
driving method where a constant current is applied to each pixel or subpixel
2.2.8
constant-voltage driving
driving method where a constant voltage is applied to each pixel or subpixel
2.2.9
display with a bright background
display showing dark images on a bright background
2.2.10
display with a dark background
display showing bright images on a dark background
2.2.11
doping method
method of adding a small quantity of different material to host material
NOTE This method is used in order to improve device characteristics or to change the emission spectrum.
2.2.12
driving method
specific method for activating each pixel or subpixel
2.2.13
dual emission display
display in which light is emitted from both sides (top and bottom) of a substrate on which
organic electroluminescent layers are made
2.2.14
emissive display
display with pixels or subpixels that emit light
2.2.15
flexible display
display that is mechanically flexible
2.2.16
full-colour display
display capable of showing at least 3 primary colours, the colour gamut of which includes a
white area (e.g. containing D50, D65, D75) and having at least 64 grey scale per primary
2.2.17
matrix display
display consisting of regularly arranged pixels and/or subpixels, e.g. arranged in rows and
columns
2.2.18
molecular organic light emitting diode display
organic light emitting diode display composed of organic (small) molecules

62341-1-2 © IEC:2007 – 7 –
2.2.19
monochrome display
display capable of reproducing only one colour
2.2.20
multi-colour display
display other than monochrome display and full-colour display
...