EN 62386-102:2009

SLOVENSKI STANDARD
01-november-2009
1DGRPHãþD
SIST EN 60929:2006
Digitalni naslovljivi vmesnik za razsvetljavo - 102. del: Splošne zahteve - Krmilje
(IEC 62386-102:2009)
Digital addressable lighting interface - Part 102: General requirements - Control gear
(IEC 62386-102:2009)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 102: Allgemeine
Anforderungen - Betriebsgeräte (IEC 62386-102:2009)
Interface d'éclairage adressable numérique - Partie 102: Exigences générales -
Appareillages (CEI 62386-102:2009)
Ta slovenski standard je istoveten z: EN 62386-102:2009
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62386-102
NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM
ICS 29.140.50; 29.140.99 Partially supersedes EN 60929:2006

English version
Digital addressable lighting interface -
Part 102: General requirements -
Control gear
(IEC 62386-102:2009)
Interface d'éclairage  Digital adressierbare Schnittstelle
adressable numérique - für die Beleuchtung -
Partie 102: Exigences générales - Teil 102: Allgemeine Anforderungen -
Appareillages de commande Betriebsgeräte
(CEI 62386-102:2009) (IEC 62386-102:2009)

This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62386-102:2009 E
Foreword
The text of document 34C/874/FDIS, future edition 1 of IEC 62386-102, prepared by SC 34C, Auxiliaries
for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62386-102 on 2009-07-01.
digital signals”, and Annex G, "Test procedures for ballasts with digital control interface according to
Clause E.4" of EN 60929:2006.
This Part 102 is intended to be used in conjunction with Part 101, which contains general requirements
for the relevant product type (system), and with the appropriate part 2XX (particular requirements for
control gear) containing clauses to supplement or modify the corresponding clauses in Parts 101 and 102
in order to provide the relevant requirements for each type of product.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-04-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-07-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62386-102:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60598-1 NOTE  Harmonized as EN 60598-1:2008 (modified).
IEC 60669-2-1 NOTE  Harmonized as EN 60669-2-1:2004 (modified).
IEC 60921 NOTE  Harmonized as EN 60921:2004 (not modified).
IEC 60923 NOTE  Harmonized as EN 60923:2005 (not modified).
IEC 60925 NOTE  Harmonized as EN 60925:1991 (not modified).
IEC 61347-1 NOTE  Harmonized as EN 61347-1:2007 (modified).
IEC 61547 NOTE  Harmonized as EN 61547:2009 (not modified).
CISPR 15 NOTE  Harmonized as EN 55015:2006 (not modified).
__________
- 3 - EN 62386-102:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60929 2006 AC-supplied electronic ballasts for tubular EN 60929 2006
fluorescent lamps - + corr. December 2006
Performance requirements
1) 2)
IEC 61347-2-3 - Lamp controlgear - EN 61347-2-3 2001
Part 2-3: Particular requirements for a.c. + corr. July 2003
supplied electronic ballasts for fluorescent
lamps
IEC 62386-101 2009 Digital addressable lighting interface - EN 62386-101 2009
Part 101: General requirements - System

1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62386-102 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Digital addressable lighting interface –
Part 102: General requirements – Control gear

Interface d’éclairage adressable numérique –
Partie 102: Exigences générales – Appareillages de commande

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XF
CODE PRIX
ICS 29.140.50; 29.140.99 ISBN 2-8318-1040-1
– 2 – 62386-102 © IEC:2009
CONTENTS
FOREWORD.7
INTRODUCTION.9
1 Scope.10
2 Normative references .10
3 Terms and definitions .10
4 General .12
5 Electrical specification.12
6 Interface power supply .12
7 Transmission protocol structure.12
7.1 General .12
7.2 Forward frame.12
7.2.1 Address byte ‘YAAA AAAS’ .12
7.2.2 Data byte ‘XXXX XXXX’.13
7.3 Backward frame .13
8 Timing .13
8.1 Information bit timing.13
8.2 Forward frame timing .14
8.3 Backward frame timing .15
8.4 Frame sequence timing .15
9 Method of operation .16
9.1 Logarithmic dimming curve, arc power levels and accuracy .16
9.2 Power-on.19
9.3 Interface-failure.19
9.4 Min and max level .19
9.5 Fade time and fade rate .20
9.6 Reaction to commands during error state .20
9.7 Behaviour during lamp preheating and lamp ignition time .21
9.8 Memory access and memory map .21
9.8.1 Memory access commands.21
9.8.2 Memory map.21
10 Declaration of variables .24
11 Definition of commands .25
11.1 Arc power control commands.25
11.1.1 Direct arc power control command:.25
11.1.2 Indirect arc power control commands .26
11.2 Configuration commands:.28
11.2.1 General configuration commands: .28
11.2.2 Arc power parameters settings: .28
11.2.3 System parameters settings .30
11.3 Query commands .30
11.3.1 Queries related to status information .30
11.3.2 Queries related to arc power parameter settings.32
11.3.3 Queries related to system parameter settings .32
11.3.4 Application extended commands .33
11.4 Special Commands .33

62386-102 © IEC:2009 – 3 –
11.4.1 Terminate special processes .33
11.4.2 Download information to the DTR .34
11.4.3 Addressing commands .34
11.4.4 Extended special commands .35
11.5 Summary of the command set .38
12 Test procedures .40
12.0 General .40
12.1 Test sequences 'Physical operational parameters’.44
12.1.1 Test sequences 'Waveform' .44
12.1.2 Test sequence 'Frame structure timing' .53
12.1.3 Insulation test.54
12.1.4 Optional test sequences .54
12.1.5 Test sequence 'Response time' .56
12.2 Test sequences 'Configuration commands' .57
12.2.1 Test sequences 'General configuration commands'.57
12.2.2 Test sequences 'Arc power parameter settings' .70
12.2.3 Test sequences 'System parameter settings' .80
12.2.4 Test sequences 'Memory Access' .84
12.3 Test sequences 'Arc power control commands'.88
12.3.1 Test sequences 'Timing' .88
...