EN 60811-503:2012/A1:2023

SLOVENSKI STANDARD
01-februar-2024
Električni in optični kabli - Preskusne metode za nekovinske materiale - 503. del:
Mehanski preskusi - Preskus skrčenja plaščev - Dopolnilo A1 (IEC 60811-
503:2012/AMD1:2023)
Electric and optical fibre cables - Test methods for non-metallic materials - Part 503:
Mechanical tests - Shrinkage test for sheaths (IEC 60811-503:2012/AMD1:2023)
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 503: Mechanische Prüfungen - Schrumpfungsprüfung für Mäntel (IEC
60811-503:2012/AMD1:2023)
Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non
métalliques - Partie 503: Essais mécaniques - Essai de rétraction des gaines (IEC 60811
-503:2012/AMD1:2023)
Ta slovenski standard je istoveten z: EN 60811-503:2012/A1:2023
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60811-503:2012/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 29.035.01; 29.060.20
English Version
Electric and optical fibre cables - Test methods for non-metallic
materials - Part 503: Mechanical tests - Shrinkage test for
sheaths
(IEC 60811-503:2012/AMD1:2023)
Câbles électriques et à fibres optiques - Méthodes d'essai Kabel, isolierte Leitungen und Glasfaserkabel -
pour les matériaux non métalliques - Partie 503: Essais Prüfverfahren für nichtmetallene Werkstoffe - Teil 503:
mécaniques - Essai de rétraction des gaines Mechanische Prüfungen - Schrumpfungsprüfung für Mäntel
(IEC 60811-503:2012/AMD1:2023) (IEC 60811-503:2012/AMD1:2023)
This amendment A1 modifies the European Standard EN 60811-503:2012; it was approved by CENELEC on 2023-12-07. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60811-503:2012/A1:2023 E

European foreword
The text of document 20/2129/FDIS, future IEC 60811-503/AMD1, prepared by IEC/TC 20 "Electric
cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-07
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60811-503:2012/AMD1:2023 was approved by CENELEC
as a European Standard without any modification.

IEC 60811-503 ®
Edition 1.0 2023-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Electric and optical fibre cables – Test methods for non-metallic materials –

Part 503: Mechanical tests – Shrinkage test for sheaths

Câbles électriques et à fibres optiques – Méthodes d'essai pour les matériaux

non métalliques –
Partie 503: Essais mécaniques – Essai de rétraction des gaines

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.035.01, 29.060.20 ISBN 978-2-8322-7743-0

– 2 – IEC 60811-503:2012/AMD1:2023
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –

Part 503: Mechanical tests –
Shrinkage test for sheaths
AMENDMENT 1
FOREWORD
...