EN 61076-3-110:2008

SLOVENSKI STANDARD
01-junij-2008
Konektorji za elektronsko opremo - Zahteve za izdelek - 3-110. del: Pravokotni
konektorji - Podrobna specifikacija za zaslonjene, proste in fiksne konektorje za
prenos podatkov s frekvencami do 1 000 MHz (IEC 61076-3-110:2007)
Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular
connectors - Detail specification for shielded, free and fixed connectors for data
transmission with frequencies up to 1 000 MHz (IEC 61076-3-110:2007)
Steckverbinder für elektronische Einrichtungen - Produktanforderungen - Teil 3-110:
Rechteckige Steckverbinder - Bauartspezifikation für geschirmte freie und feste
Steckverbinder für Datenübertragungen bis 1 000 MHz (IEC 61076-3-110:2007)
Connecteurs pour équipements électroniques - Exigences de produit - Partie 3-110:
Connecteurs rectangulaires - Spécification particuliere pour les fiches et les embases
écrantées pour la transmission de données a des fréquences jusqu'a 1 000 MHz (CEI
61076-3-110:2007)
Ta slovenski standard je istoveten z: EN 61076-3-110:2008
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61076-3-110
NORME EUROPÉENNE
April 2008
EUROPÄISCHE NORM
ICS 31.220.10
English version
Connectors for electronic equipment -
Product requirements -
Part 3-110: Rectangular connectors -
Detail specification for shielded, free and fixed connectors
for data transmission with frequencies up to 1 000 MHz
(IEC 61076-3-110:2007)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Exigences de produit - Produktanforderungen -
Partie 3-110: Connecteurs rectangulaires - Teil 3-110: Rechteckige Steckverbinder -
Spécification particulière pour les fiches Bauartspezifikation für geschirmte freie
et les embases écrantées und feste Steckverbinder
pour la transmission de données für Datenübertragungen bis 1 000 MHz
à des fréquences jusqu'à 1 000 MHz (IEC 61076-3-110:2007)
(CEI 61076-3-110:2007)
This European Standard was approved by CENELEC on 2008-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-3-110:2008 E

Foreword
The text of document 48B/1796/FDIS, future edition 1 of IEC 61076-3-110, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-3-110 on 2008-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-12-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-03-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-3-110:2007 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61076-3-110:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1)
- - Communication cables - Specifications EN 50289-1-14 -
for test methods -
Part 1-14: Electrical test methods - Coupling
attenuation or screening attenuation of
connecting hardware
1) 2)
IEC 60068-1 - Environmental testing - EN 60068-1 1994
Part 1: General and guidance
1) 2)
IEC 60068-2-38 - Environmental testing - EN 60068-2-38 1999
Part 2: Tests - Test Z/AD: Composite
temperature/humidity cyclic test

IEC 60352 Series Solderless connections EN 60352 Series

1) 2)
IEC 60352-2 - Solderless connections - EN 60352-2 2006
Part 2: Crimped connections - General
requirements, test methods and practical
guidance
1) 2)
IEC 60352-3 - Solderless connections - EN 60352-3 1994
Part 3: Solderless accessible insulation
displacement connections - General
requirements, test methods and practical
guidance
1) 2)
IEC 60352-4 - Solderless connections - EN 60352-4 1994
Part 4: Solderless non-accessible insulation
displacement connections - General
requirements, test methods and practical
guidance
1) 2)
IEC 60352-5 - Solderless connections - EN 60352-5 2008
Part 5: Press-in connections - General
requirements, test methods and practical
guidance
1) 2)
IEC 60352-6 - Solderless connections - EN 60352-6 1997
Part 6: Insulation piercing connections -
General requirements, test methods and
practical guidance
1) 2)
IEC 60352-7 - Solderless connections - EN 60352-7 2002
Part 7: Spring clamp connections - General
requirements, test methods and practical
guidance
1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year
IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
1) 2)
IEC 60512-1-100 - Connectors for electronic equipment - Tests EN 60512-1-100 2006
and measurements -
Part 1-100: General - Applicable publications

IEC 60603-7 Series Connectors for electronic equipment - EN 60603-7 Series
Part 7: Detail specification for 8-way, shielded
free and fixed connectors with common
mating features, with assessed quality

1) 2)
IEC 60664-1 - Insulation coordination for equipment within EN 60664-1 2007
low-voltage systems -
Part 1: Principles, requirements and tests

IEC 61076-1 2006 Connectors for electronic equipment - Product EN 61076-1 2006
requirements -
Part 1: Generic specification
3) 3)
IEC 61076-3 200X Connectors for electronic equipment - Product EN 61076-3 200X
requirements -
Part 3: Rectangular connectors - Sectional
specification
IEC 61156 Series Multicore and symmetrical pair/quad cables - -
for digital communications
1)
IEC 61156-2 - Multicore and symmetrical pair/quad cables - -
for digital communications -
Part 2: Horizontal floor wiring - Sectional
specification
1)
IEC 61156-3 - Multicore and symmetrical pair/quad cables - -
for digital communications -
Part 3: Work area wiring - Sectional
specification
1)
IEC 61156-4 - Multicore and symmetrical pair/quad cables - -
for digital communications -
Part 4: Riser cables - Sectional specification

1)
IEC 61156-5 - Multicore and symmetrical pair/quad cables - -
for digital communications -
Part 5: Symmetrical pair/quad cables with
transmission characteristics up to 600 MHz -
Horizontal floor wiring - Sectional specification

1)
IEC 61156-6 - Multicore and symmetrical pair/quad cables - -
for digital communications -
Part 6: Symmetrical pair/quad cables with
transmission characteristics up to 600 MHz -
Work area wiring - Sectional specification

ISO/IEC 11801 2002 Information technology - Generic cabling for - -
customer premises
1) 2)
ISO 1302 - Geometrical Product Specifications (GPS) - EN ISO 1302 2002
Indication of surface texture in technical
product documentation
1)
ITU-T - Resistibility of telecommunication equipment - -
Recommendation installed in a telecommunications centre to
K.20 overvoltages and overcurrents

3)
At draft stage.
- 5 - EN 61076-3-110:2008
Publication Year Title EN/HD Year
ITU-T 2000 Resistibility tests for telecommunication - -
Recommendation equipment exposed to overvoltages and
K.44 overcurrents - Basic Recommendation

IEC 61076-3-110
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Connectors for electronic equipment – Product requirements –
Part 3-110: Rectangular connectors – Detail specification for shielded, free and
fixed connectors for data transmission with frequencies up to 1 000 MHz

Connecteurs pour équipements électroniques – Exigences de produit –
Partie 3-110: Connecteurs rectangulaires – Spécification particulière pour les
fiches et les embases écrantées pour la transmission de données à des
fréquences jusqu'à 1 000 MHz
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XA
CODE PRIX
ICS 31.220.10 ISBN 2-8318-9431-X

– 2 – 61076-3-110 © IEC:2007
CONTENTS
FOREWORD.4
INTRODUCTION.6

1 General .8
1.1 Scope.8
1.2 Normative references .8
2 Technical information.10
2.1 Terms and definitions .10
2.2 Systems of levels.10
2.3 Complete connectors (pairs) .10
2.4 Fixed connectors .11
2.5 Free connectors .11
2.6 Classification into climate categories .11
2.7 Clearance and creepage distances .11
2.8 Current carrying capacity .11
2.9 IEC type designation.12
2.10 Marking .12
3 Dimensional information .13
3.1 General .13
3.2 Isometric view and common features .13
3.3 Mating information .13
3.4 Fixed connectors .15
3.5 Free connectors .18
3.6 Terminations .21
3.7 Mounting information .22
3.8 Gauges .22
4 Characteristics.30
4.1 General .30
4.2 Pin and pair grouping assignment .30
4.3 Climatic category.31
4.4 Electrical characteristics .31
4.5 Transmission characteristics.33
4.6 Mechanical characteristics.36
5 Test schedule .36
5.1 General .36
5.2 Test proc
...