Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

2015-08-07: LVD directive removed for the whole EN 60061 series following D151/C072 taken on 2015-08-04.

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 2: Lampenfassungen

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 2: Douilles

Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 2. del: Okovi žarnic in sijalk

Vsebuje priporočila IEC v zvezi z vznožki in okovi žarnic in sijalk , ki so danes v splošni rabi, skupaj z ustreznimi kalibri, s ciljem zagotoviti mednarodno medsebojno zamenljivost. Ponazorjeni kalibri, čeprav načeloma splošno sprejeti, niso nujno edina oblika, v kateri so lahko narejeni.

General Information

Status
Published
Publication Date
01-Nov-2012
Withdrawal Date
31-Oct-2015
Current Stage
6060 - Document made available - Publishing
Start Date
02-Nov-2012
Completion Date
02-Nov-2012

Relations

Buy Standard

Amendment
EN 60061-2:1999/A45:2013
English and French language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2013
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 2. del: Okovi žarnic in sijalk
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 2: Lampholders
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 2: Lampenfassungen
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 2: Douilles
Ta slovenski standard je istoveten z: EN 60061-2:1993/A45:2012
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60061-2/A45
NORME EUROPÉENNE
November 2012
EUROPÄISCHE NORM
ICS 29.140.10
English version
Lamp caps and holders together with gauges for the control
of interchangeability and safety -
Part 2: Lampholders
(IEC 60061-2:1969/A45:2012)
Culots de lampes et douilles  Lampensockel und -fassungen sowie
ainsi que calibres pour le contrôle Lehren zur Kontrolle der Austauschbarkeit
de l'interchangeabilité et de la sécurité - und Sicherheit -
Partie 2: Douilles Teil 2: Lampenfassungen
(CEI 60061-2:1969/A45:2012) (IEC 60061-2:1969/A45:2012)

This amendment A45 modifies the European Standard EN 60061-2:1993; it was approved by CENELEC on
2012-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60061-2:1993/A45:2012 E

Foreword
The text of document 34B/1644/FDIS, future Amendment 45 to edition 3 of IEC 60061-2, prepared by
SC 34B "Lamp caps and holders" of IEC TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 60061-2:1993/A45:2012.
The following dates are fixed:
(dop) 2013-08-01
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-11-01
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 60061-2:1969/A45:2012 was approved by CENELEC as a
European Standard without any modification.

NORME
CEI
INTERNATIONALE IEC
INTERNATIONAL 60061-2
STANDARD
AMENDEMENT 45
AMENDMENT 45
2012-09
Amendement 45
Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 2:
Douilles
Amendment 45
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 2:
Lampholders
Les feuilles de cet amendement sont à insérer dans la
CEI 60061-2 (1969)
The sheets contained in this amendment are to be inserted
in IEC 60061-2 (1969)
 IEC 2012 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

NORME CEI
INTERNATIONALE IEC
INTERNATIONAL 60061-2
Edition 3.45
STANDARD
2012-09
Modifiée selon les Compléments:

Amended in accordance with Supplements:
A(1970), B(1971), C(1972), D(1975), E(1977),

F(1980), G(1983), H(1987), J(1989), K(1992), L(1994),

M(1994), N(1995), P(1996), Q(1996), R(1996), S(1997)

et les amendements/and amendments 18(1998), 19(1999), 20(1999), 21(2000),

22(2001), 23(2001), 24(2001), 25(2002), 26(2002), 27(2002), 28(2003), 29(2003),

30(2003), 31(2004), 32(2004), 33(2005), 34(2006) 35(2007), 36(2007), 37(2008),

38(2009), 39(2009), 40(2010), 41(2010), 42(2010), 43(2011), 44(2011) et/and 45(2012)

Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 2:
Douilles
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 2:
Lampholders
 IEC 2012 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

60061-2 Amend. 45  CEI/IEC:2012 – 1 –

SOMMAIRE CONTENTS
DOUILLES - SOMMAIRE PAR DÉSIGNATION LAMPHOLDERS - CONTENTS BY DESIGNATION

Feuilles Sheet
Douilles PX26 . 7005-5-3 Lampholders PX26 . 7005-5-3
Douille E11 . 7005-6-1 Lampholder E11 . 7005-6-1
Douille EY10 . 7005-7-1 Lampholder EY10 . 7005-7-1
Douilles pour culots à baïonnette BAX9s . 7005-8-1 Lampholders for bayonet caps BAX9s . 7005-8-1
Douilles pour culots à baïonnette BAY9s . 7005-9-1 Lampholders for bayonet caps BAY9s . 7005-9-1
Douilles à baïonnette B22d . 7005-10-8 Bayonet lampholders B22d . 7005-10-8
Douilles à baïonnette B22d-3(90°/135°) . 7005-10A-4 Bayonet lampholders B22d-3(90°/135°) . 7005-10A-4
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA7 . 7005-11-3 caps BA7 . 7005-11-3
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA9 . 7005-12-2 caps BA9 . 7005-12-2
Douilles BA15, BAU15, BAW15, BAY15 Lampholders BA15, BAU15, BAW15, BAY15
& BAZ15 . 7005-13-5 & BAZ15 . 7005-13-5
Douilles pour culots à baïonnette Lampholders for bayonet automobile
pour automobiles BA20 . 7005-14-2 caps BA20 . 7005-14-2
Douilles pour culots à baïonnette BA21-3 . 7005-15-2 Lampholders for bayonet caps BA21-3 . 7005-15-2
Douilles à baïonnette B15d . 7005-16-4 Bayonet lampholders B15d . 7005-16-4
Douilles à baïonnette BY22d . 7005-17-5 Bayonet lampholders BY22d . 7005-17-5
Douille pour culots à baïonette BAU15s . 7005-19-1 Lampholder for bayonet caps BAU15s . 7005-19-1
Position de la chemise filetée de la douille Edison Position of holder thread in relation to central
par rapport au contact central. 7005-20-6 contact of the Edison lampholder . 7005-20-6
Douilles E26 . 7005-21A-1 Lampholders E26 . 7005-21A-1
Douilles E39 . 7005-24A-3 Lampholders E39 . 7005-24A-3
Douille E12 . 7005-28-1 Lampholder E12 . 7005-28-1
Position de la chemise filetée par rapport aux Position of holder thread in relation to the central
contacts central et intermédiaire de la douille E26d . 7005-29-2 and intermediate contacts of the lampholder E26d . 7005-29-2
Douille préfocus EP10 . 7005-30-1 Prefocus lampholder EP10 . 7005-30-1
Douilles P20, PX20, PY20 & PZ20 . 7005-31-2 Lampholders P20, PX20, PY20 & PZ20 . 7005-31-2
Douilles P22 & PX22 . 7005-32-2 Lampholders P22 & PX22 . 7005-32-2
Douilles 2G13 . 7005-33-1 Lampholders 2G13 . 7005-33-1
Douille PX43t . 7005-34-1 Lampholder PX43t . 7005-34-1
Douille PX13.5s . 7005-35-1 Lampholder PX13.5s . 7005-35-1
Douille P26s . 7005-36-1 Lampholder P26s . 7005-36-1
Douille PKX22s . 7005-37-1 Lampholder PKX22s . 7005-37-1
Douille préfocus P18s . 7005-38-3 Prefocus lampholder P18s . 7005-38-3
Douilles P43t . 7005-39-4 Lampholders P43t. 7005-39-4
Douilles préfocus P28s . 7005-42-6 Prefocus lampholders P28s . 7005-42-6
Douille préfocus P40 . 7005-43-3 Prefocus lampholder P40 . 7005-43-3
Douille de précision P30s pour culot Precision holder P30s for prefocus
préfocus P30s-10.3 . 7005-44-2 cap P30s-10.3 . 7005-44-2
Douilles G17q, GX17q & GY17q . 7005-45-2 Lampholders G17q, GX17q & GY17q . 7005-45-2
Douille pour automobiles P14.5s . 7005-46-3 Lampholder for automobile lamps P14.5s . 7005-46-3
Douille PK22s . 7005-47-2 Lampholder PK22s . 7005-47-2
Distance de montage pour ensemble de Mounting of combined pair of inflexible
deux douilles non flexibles G13 . 7005-50-4 lampholders G13 . 7005-50-4
Distance de montage pour ensemble de Mounting distance of a combined pair of inflexible
deux douilles non flexibles G5 . 7005-51-4 lampholders G5 . 7005-51-4
Distance de montage pour ensemble de deux Mounting distance of a combined pair of lampholders
douilles GX5 . 7005-51A-1 GX5 . 7005-51A-1
Combinaisons de deux douilles R7s & RX7s . 7005-53-4 Combined pairs of lampholders R7s & RX7s . 7005-53-4
Douilles R7s & RX7s . 7005-53A-5 Lampholders R7s & RX7s . 7005-53A-5
Douille Fa6 . 7005-55-3 Lampholder Fa6 . 7005-55-3
Douille G10q . 7005-56-2 Lampholder G10q.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.