EN 61784-5-4:2012/A1:2015

SLOVENSKI STANDARD
01-april-2016
Industrijska komunikacijska omrežja - Profili - 5-4. del: Inštalacija procesnih vodil -
Inštalacijski profili za CPF 4 (IEC 61784-5-4:2010/A1:2015)
Industrial communication networks - Profiles - Part 5-4: Installation of fieldbuses -
Installation profiles for CPF 4 (IEC 61784-5-4:2010/A1:2015)
Industrielle Kommunikationsnetze - Profile - Teil 5-4: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 4 (IEC 61784-5-4:2010/A1:2015)
Réseaux de communication industriels - Profils - Partie 5-4: Installation des bus de
terrain - Profils d'installation pour CPF 4 (IEC 61784-5-4:2010/A1:2015)
Ta slovenski standard je istoveten z: EN 61784-5-4:2012/A1:2015
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61784-5-4:2012/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2015
ICS 25.040.40; 35.100.40
English Version
Industrial communication networks - Profiles -
Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4
(IEC 61784-5-4:2010/A1:2015)
Réseaux de communication industriels - Profils -  Industrielle Kommunikationsnetze - Profile -
Partie 5-4: Installation des bus de terrain - Profils Teil 5-4: Feldbusinstallation - Installationsprofile für die
d'installation pour CPF 4 Kommunikationsprofilfamilie 4
(IEC 61784-5-4:2010/A1:2015) (IEC 61784-5-4:2010/A1:2015)
This amendment A1 modifies the European Standard EN 61784-5-4:2012; it was approved by CENELEC on 2015-07-21. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61784-5-4:2012/A1:2015 E

European foreword
The text of document 65C/768/CDV, future IEC 61784-5-4:2010/A1, prepared by SC 65C "Industrial
networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-4:2012/A1:2015.
The following dates are fixed:
(dop) 2016-04-21
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-07-21
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61784-5-4:2010/A1:2015 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
Replacement in Annex ZA of EN 61784-5-4:
...