ENV 1927-1:1998
(Main)Qualitative classification of softwood round timber - Part 1: Spruces and firs
Qualitative classification of softwood round timber - Part 1: Spruces and firs
This standard specifies the qualitative classification for the roundwood of spruces (Picea spp) and firs (Abies spp). The classification is made either using clauses 4 and 5 or using clause 6. Clauses 4 and 5 describe the qualitative classification of round timber for which the intended use is unknown. Clause 6 gives the characteristics to be included in all national standards describing a qualitative classification or as guideline for contracts describing qualities for round timber of spruces and firs where the intended use is known.
Qualitäts-Sortierung von Nadel-Rundholz - Teil 1: Fichten und Tannen
Diese Norm legt die Qualitäts-Sortierung von Fichten- und Tannen-Rundholz fest (Picea spp und Abies spp). Die Sortierung kann entweder nach den Abschnitten 4 und 5 oder nach dem Abschnitt 6 vorgenommen werden. Die Abschnitte 4 und 5 beschreiben die verwendungsneutrale Qualitäts-Sortierung. Der Abschnitt 6 beschreibt die Kriterien, welche bei allen nationalen Normen für verwendungsbezogenes Nadel-Rundholz (Fichten- und Tannen) aufgenommen werden. Bei Verträgen über verwendungsbezogenes Rundholz werden die in Abschnitt 6 aufgeführten Merkmale angewendet.
Classement qualitatif des bois ronds résineux - Partie 1: Epicéas et sapins
La présente norme spécifie le classement qualitatif des bois ronds d'épicéas (Picea spp) et de sapins (Abies spp). Le classement est réalisé soit en utilisant les articles 4 et 5, soit l'article 6. Les articles 4 et 5 décrivent le classement qualitatif de bois ronds dont la destination n'est pas connue. L'article 6 donne les caractéristiques devant être incluses dans toutes normes nationales décrivant un classement qualitatif ou servir de guide à des contrats fixant les qualités des bois ronds d'épicéas et de sapins, dont la destination est connue.
Razvrščanje okroglega lesa iglavcev po kakovosti – 1. del: Smreke in jelke
General Information
- Status
- Withdrawn
- Publication Date
- 15-Dec-1998
- Withdrawal Date
- 25-Mar-2008
- Technical Committee
- CEN/TC 175 - Round and sawn timber
- Drafting Committee
- CEN/TC 175/WG 4 - Round timber
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Mar-2008
- Completion Date
- 26-Mar-2008
Relations
- Replaced By
EN 1927-1:2008 - Qualitative classification of softwood round timber - Part 1: Spruces and firs - Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Gozdarski inštitut Slovenije
Slovenian Forestry Institute. Forest management certification support, timber testing.
Sponsored listings
Frequently Asked Questions
ENV 1927-1:1998 is a standardization document published by the European Committee for Standardization (CEN). Its full title is "Qualitative classification of softwood round timber - Part 1: Spruces and firs". This standard covers: This standard specifies the qualitative classification for the roundwood of spruces (Picea spp) and firs (Abies spp). The classification is made either using clauses 4 and 5 or using clause 6. Clauses 4 and 5 describe the qualitative classification of round timber for which the intended use is unknown. Clause 6 gives the characteristics to be included in all national standards describing a qualitative classification or as guideline for contracts describing qualities for round timber of spruces and firs where the intended use is known.
This standard specifies the qualitative classification for the roundwood of spruces (Picea spp) and firs (Abies spp). The classification is made either using clauses 4 and 5 or using clause 6. Clauses 4 and 5 describe the qualitative classification of round timber for which the intended use is unknown. Clause 6 gives the characteristics to be included in all national standards describing a qualitative classification or as guideline for contracts describing qualities for round timber of spruces and firs where the intended use is known.
ENV 1927-1:1998 is classified under the following ICS (International Classification for Standards) categories: 79.040 - Wood, sawlogs and sawn timber. The ICS classification helps identify the subject area and facilitates finding related standards.
ENV 1927-1:1998 has the following relationships with other standards: It is inter standard links to EN 1927-1:2008, EN ISO 7540:2020, EN ISO 7541:2010, EN ISO 6571:2009, EN ISO 6465:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ENV 1927-1:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2003
5D]YUãþDQMHRNURJOHJDOHVDLJODYFHYSRNDNRYRVWL±GHO 6PUHNHLQMHONH
Qualitative classification of softwood round timber - Part 1: Spruces and firs
Qualitäts-Sortierung von Nadel-Rundholz - Teil 1: Fichten und Tannen
Classement qualitatif des bois ronds résineux - Partie 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...