EN 13040:2007
(Main)Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
This European Standard specifies a routine method for preparing a sample of soil improver or growing media prior to chemical analysis and physical testing. The procedures described herein apply only to those samples that are supplied to a laboratory in the form in which they will be used for their intended purpose.
NOTE 1 This method is not applicable to liming materials and is not suitable for materials like rockwool and foam slabs.
NOTE 2 The determination of the laboratory compacted bulk density is given in Annex A.
NOTE 3 The results of an interlaboratory trial to determine moisture content are given in Annex B.
NOTE 4 The results of an interlaboratory trial to determine compacted laboratory bulk density are given in Annex B.
NOTE 5 Attention is drawn to the possible existence of national legislation for the declaration of specific products, which could differ from the general requirements of this European Standard.
Bodenverbesserungsmittel und Kultursubstrate - Probenherstellung für chemische und physikalische Untersuchungen, Bestimmung des Trockenrückstands, des Feuchtigkeitsgehaltes und der Laborschüttdichte
Amendements organiques et supports de culture - Préparation des échantillons pour les essais physiques et chimiques, détermination de la teneur en matière sèche, du taux d'humidité et de la masse volumique compactée en laboratoire
La présente Norme européenne spécifie une méthode de préparation d'un échantillon d'amendement organique ou de support de culture avant analyse chimique et essais physiques. Les modes opératoires qu'elle décrit s'appliquent aux échantillons fournis au laboratoire sous la forme qui sera celle de leur utilisation finale.
NOTE 1 La méthode n’est pas applicable aux amendements minéraux basiques et ne convient pas aux matériaux tels que la laine de roche et les blocs de mousses.
NOTE 2 L’Annexe A décrit une méthode de détermination de la masse volumique compactée en laboratoire.
NOTE 3 L'Annexe B donne les résultats d’un essai inter-laboratoires relatif à la détermination du taux d’humidité.
NOTE 4 L'Annexe B fournit les résultats d’un essai inter-laboratoires pour déterminer la masse volumique compactée au laboratoire.
NOTE 5 Les exigences de cette norme peuvent diverger par rapport aux exigences nationales en matière de déclaration des produits concernés.
Izboljševalci tal in rastni substrati - Priprava vzorcev za kemijske in fizikalne preskuse, določevanje suhe snovi, vlage in laboratorijsko stisnjene prostorninske gostote
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk densityJRVWRWHAmendements organiques et supports de culture - Préparation des échantillons pour les essais physiques et chimiques, détermination de la teneur en matiere seche, du taux d'humidité et de la masse volumique compactée en laboratoireBodenverbesserungsmittel und Kultursubstrate - Probenherstellung für chemische und physikalische Untersuchungen, Bestimmung des Trockenrückstands, des Feuchtigkeitsgehaltes und der LaborschüttdichteTa slovenski standard je istoveten z:EN 13040:2007SIST EN 13040:2008en,fr,de65.080ICS:SIST EN 13040:20011DGRPHãþDSLOVENSKI
STANDARDSIST EN 13040:200801-marec-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13040October 2007ICS 65.080Supersedes EN 13040:1999
English VersionSoil improvers and growing media - Sample preparation forchemical and physical tests, determination of dry matter content,moisture content and laboratory compacted bulk densityAmendements organiques et supports de culture -Préparation des échantillons pour les essais physiques etchimiques, détermination de la teneur en matière sèche, dutaux d'humidité et de la masse volumique compactée enlaboratoireBodenverbesserungsmittel und Kultursubstrate -Probenherstellung für chemische und physikalischeUntersuchungen, Bestimmung des Trockenrückstands, desFeuchtigkeitsgehaltes und der LaborschüttdichteThis European Standard was approved by CEN on 26 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13040:2007: E
Determination of laboratory compacted bulk density.10 A.1 General.10 A.2 Principle.10 A.3 Apparatus.10 A.4 Procedure.12 A.5 Expression of results.13 A.6 Use and storage of material.14 A.7 Precision - Compacted laboratory bulk density.14 A.8 Test report.14 Annex B (informative)
Results of an interlaboratory trial to determine moisture content and laboratory compacted bulk density.15 Bibliography.17
2 Normative references The following reference documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12579:1999, Soil improvers and growing media — Sampling ISO 565, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings 3 Terms and definitions For the purposes of this standard, the terms and definitions in EN 12579:1999 and the following apply. 3.1 test sample sample prepared from the laboratory sample and from which test portions will be taken 3.2 test portion quantity of material drawn from the test sample (or from the laboratory sample if both are the same) and on which the tests or observations are actually carried out 3.3 laboratory compacted bulk density density, expressed in grams per litre of the material as determined in the laboratory using a
1 l cylinder; the sample being compacted under defined conditions 4 Principle The laboratory sample is coded and sub-divided to prepare the test sample in such a manner as to be representative of the sample as submitted to the laboratory. The sample's intrinsic structure shall be maintained whenever possible.
NOTE Care should be taken to avoid breaking intrinsic parts and to avoid a loss of moisture. If necessary, divide the sample to form sub-samples. Recognized procedures such as coning and quartering shall be used for sub-sampling. The procedure used shall be included in the report.
The size of the final test sample shall be large enough to truly represent the laboratory sample and to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.