EN 17192:2018
(Main)Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods
Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test methods
This document defines the test methods and performance characteristics for rigid or semi-rigid non-metallic ductwork which are used for ventilation and air conditioning of buildings.
This document does not include flexible ducts such as those made of textiles, non-metallic spiral ductwork or others, which are handled in EN 13180 or ductwork made from insulation duct board, which is handled in EN 13403. Requirements for the air tightness of the ventilation system for non-residential buildings are given in EN 16798 3. For residential buildings, it is essential to apply national rules.
This document specifies methods to test rigid or semi-rigid non-metallic ductwork under laboratory conditions. On-site tests are excluded. The test methods and performance characteristics are valid for ventilation ducts with circular, rectangular or other cross sections.
Lüftung von Gebäuden - Nichtmetallische Kanäle - Anforderungen und Prüfmethoden
Dieses Dokument definiert die Prüfverfahren und Leistungsmerkmale für starre oder halbstarre nichtmetallische Luftleitungen, die für die Lüftung und Klimatisierung von Gebäuden verwendet werden.
Dieses Dokument gilt jedoch nicht für flexible Luftleitungen wie solche, die aus Textilien bestehen, nichtmetallische Wickelfalzrohre oder andere, die in der EN 13180 behandelt werden, oder Luftleitungen, die aus Isolierungs-Luftleitungsverkleidung hergestellt sind und in der EN 13403 behandelt werden. Anforderungen an die Luftdichtheit des Lüftungssystems für Nichtwohngebäude sind in der EN 16798 3 enthalten. Für Wohngebäude ist die Anwendung nationaler Vorschriften erforderlich.
Dieses Dokument spezifiziert Methoden zur Prüfung starrer oder halbstarrer nichtmetallischer Luftleitungen unter Laborbedingungen. Vorort-Prüfungen sind ausgeschlossen. Die Prüfverfahren und Leistungsmerkmale gelten für Luftleitungen mit kreisförmigen, rechteckigen und anderen Querschnitten.
Ventilation des bâtiments - Réseau de conduits ‐ Réseau de conduits non métalliques - Exigences et méthodes d'essai
Le présent document définit les méthodes d’essai et les caractéristiques de performance pour les réseaux
de conduits non métalliques rigides ou semi-rigides qui sont utilisés pour la ventilation et le
conditionnement d’air dans les bâtiments.
Le présent document n’inclut pas les conduits flexibles tel que ceux en textile, les réseaux de conduits
spiralés non métalliques ou autres, qui sont abordés dans l’EN 13180, ni les réseaux de conduits réalisés
en panneaux isolants, qui sont abordés dans l’EN 13403. Les exigences pour l’étanchéité à l’air du système
de ventilation pour les bâtiments non résidentiels sont données dans l’EN 16798-3. Pour les bâtiments
résidentiels, il est essentiel d’appliquer les règles nationales.
Le présent document spécifie les méthodes pour soumettre à essai des réseaux de conduits non
métalliques rigides ou semi-rigides en conditions de laboratoire. Les essais sur site sont exclus. Les
méthodes d’essai et les caractéristiques de performance sont valides pour les conduits de ventilation de
section transversale circulaire, rectangulaire ou autre.
Prezračevanje stavb - Kanali - Nekovinski kanali - Zahteve in preskusne metode
Ta evropski standard določa preskusne metode in značilnosti delovanja togih in poltogih nekovinskih kanalov, ki se v stavbah uporabljajo za prezračevanje in ohlajevanje s klimatsko napravo.
Ta standard ne vključuje gibkih kanalov, kot so tekstilni kanali, spiralni kanali in drugi, ki so predmet standarda EN 13180, ali kanali, izdelani iz izolacijskega materiala, ki so predmet standarda EN 13403. Zahteve za zračno nepropustnost prezračevalnih sistemov za nestanovanjske stavbe so podane v standardu EN 13779. Za stanovanjske stavbe je treba uporabiti nacionalne predpise.
Standard je oblikovan za preskušanje togih in poltogih prezračevalnih kanalov in njihovih sestavnih delov pri laboratorijskih pogojih. Preskuse na kraju samem je treba izvesti v skladu s standardom EN 12599.
Preskusne metode in značilnosti delovanja so veljavne za prezračevalne kanale s krožnim, pravokotnim ali drugačnim prečnim prerezom. Ta standard zajema kanale, ki so odporni proti požaru, in tiste, ki niso. Prezračevalne kanale, ki so odporni proti požaru, je treba preskusiti tudi v skladu s standardom EN 1366-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Prezračevanje stavb - Kanali - Nekovinski kanali - Zahteve in preskusne metode
Ventilation for buildings - Ductwork - Non-metallic ductwork - Requirements and test
methods
Lüftung von Gebäuden - Nichtmetallische Kanäle - Anforderungen und Prüfmethoden
Réseau de conduits - Réseau de conduits non métalliques - Exigences et méthodes
d’essai
Ta slovenski standard je istoveten z: EN 17192:2018
ICS:
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17192
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 91.140.30
English Version
Ventilation for buildings - Ductwork - Non-metallic
ductwork - Requirements and test methods
Réseau de conduits - Réseau de conduits non Lüftung von Gebäuden - Nichtmetallische Kanäle -
métalliques - Exigences et méthodes d'essai Anforderungen und Prüfmethoden
This European Standard was approved by CEN on 5 November 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17192:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols . 7
5 Specification . 7
5.1 General . 7
5.2 Air tightness . 8
5.3 Pressure drop . 8
5.4 Service temperature . 9
5.5 Reaction to fire . 9
5.6 Resistance to external pressure . 9
5.7 Thermal resistance . 9
5.8 Microbial resistance . 9
5.9 Dangerous substances . 9
6 General characteristics . 9
6.1 Dimension and tolerances . 9
6.2 Documentation . 9
6.3 Mechanical connection . 9
7 Requirements . 10
7.1 General . 10
7.2 Air tightness . 10
7.3 Pressure drop . 10
7.4 Service temperature . 10
7.5 Reaction to fire . 10
7.6 Resistance to external pressure . 10
7.7 Thermal resistance . 10
7.8 Microbial resistance . 10
8 Test methods . 10
8.1 General . 10
8.2 Air tightness . 10
8.2.1 General . 10
8.2.2 Test assembly . 11
8.3 Pressure drop . 12
8.3.1 General . 12
8.3.2 Test procedure for duct . 12
8.3.3 Test procedure for a component with one inlet and one outlet . 13
8.3.4 Test procedure for converging junctions . 14
8.3.5 Test procedure for diverging junctions . 15
8.4 Service temperature . 16
8.5 Reaction to fire . 16
8.5.1 General . 16
8.5.2 Test configurations for SBI test . 16
8.6 Resistance to external pressure . 18
8.6.1 General . 18
8.6.2 Test rig . 18
8.6.3 Measurement of deformation force F . 19
8.7 Thermal resistance . 20
8.8 Microbial resistance . 20
9 Product Information . 20
9.1 Documentation . 20
9.2 Marking and labelling . 21
Bibliography . 22
European foreword
This document (EN 17192:2018) has been prepared by Technical Committee CEN/TC 156 “Ventilation
for buildings”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
1 Scope
This document defines the test methods and performance characteristics for rigid or semi-rigid non-
metallic ductwork which are used for ventilation and air conditioning of buildings.
This document does not include flexible ducts such as those made of textiles, non-metallic spiral
ductwork or others, which are handled in EN 13180 or ductwork made from insulation duct board, which
is handled in EN 13403. Requirements for the air tightness of the ventilation system for non-residential
buildings are given in EN 16798-3. For residential buildings, it is essential to apply national rules.
This document specifies methods to test rigid or semi-rigid non-metallic ductwork under laboratory
conditions. On-site tests are excluded. The test methods and performance characteristics are valid for
ventilation ducts with circular, rectangular or other cross sections.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1507, Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for
strength and leakage
EN 12237, Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts
EN 12664, Thermal performance of building materials and products - Determination of thermal resistance
by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low
thermal resistance
EN 12667, Thermal performance of building materials and products - Determination of thermal resistance
by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal
resistance
EN 12792, Ventilation for buildings - Symbols, terminology and graphical symbols
EN 13501-1, Fire classification of construction products and building elements — Part 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.