EN 2897:1996
(Main)Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
This standard specifies the characteristics of screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa / 235°C.
Luft- und Raumfahrt - Flachkopf-Paßschrauben mit Flügelkreuzschlitz, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei Raumtemperatur)/235°C
Diese Norm legt die Eigenschaften von Flachkopf-Paßschrauben mit Flügelkreuzschlitz und kurzem Gewinde, aus legiertem Stahl, verkadmet, fest. Klasse: 1100 MPa / 235°C.
Série aérospatiale - Vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance serrée, filetage court, en acier allié, cadmiées - Classification: 1100 MPa (à température ambiante)/235°C
La présente norme spécifie les caractéristiques des vis à tête cylindrique, à empreinte cruciforme déportée, tige normale à tolérance serrée, filetage court, en acier allié, cadmiées. Classification: 1100 MPa / 235°C.
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C
General Information
- Status
- Published
- Publication Date
- 30-Jul-1996
- Withdrawal Date
- 30-Jan-1997
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 3 - Mechanical
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 31-May-2017
- Completion Date
- 09-Feb-2026
Relations
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
- Referred By
EN 1556:1998 - Bar coding - Terminology - Effective Date
- 28-Jan-2026
- Effective Date
- 18-Jan-2023
Overview
EN 2897:1996 is a European aerospace standard specifying requirements for high-performance screws used in critical aerospace applications. This standard covers pan head screws with an offset cruciform recess, featuring a close tolerance normal shank and short thread, manufactured from alloy steel and cadmium plated for enhanced corrosion resistance. These screws are classified to withstand a tensile strength of 1100 MPa at ambient temperature and maintain performance at elevated temperatures up to 235 °C.
This standard ensures consistent quality and reliability for fastening components in aerospace assemblies where strength, precision, and durability are critical. By adhering to EN 2897:1996, manufacturers and engineers can optimize joint integrity and safety in demanding aerospace environments.
Key Features
- Screw Type: Pan head design for robust and even load distribution
- Recess Style: Offset cruciform recess enabling secure torque application and reduced cam-out risk
- Shank: Close tolerance normal shank ensuring precise fit and minimal play within assemblies
- Thread Length: Short thread configuration suitable for high-strength applications with limited engagement length
- Material: Alloy steel for excellent mechanical properties and toughness
- Coating: Cadmium plating to provide superior corrosion resistance and maintain fastening integrity over time
- Performance Class: Rated for 1100 MPa tensile strength at ambient temperature and operable at temperatures up to 235 °C
Applications
EN 2897:1996 screws apply primarily in the aerospace industry where secure, high-strength fasteners are essential. Typical use cases include:
- Aircraft structural assemblies subject to high mechanical stresses
- Engine components requiring stable fasteners in elevated temperature environments
- Avionics housing and equipment fastening needing corrosion-resistant hardware
- Aerospace manufacturing and maintenance processes demanding standardized, close tolerance fastening solutions
- Critical mechanical joints in commercial and military aircraft construction
Using screws compliant with this standard enhances overall safety, reliability, and performance of aerospace vehicles where fastener failure is not an option.
Related Standards
For aerospace fasteners and hardware, EN 2897:1996 aligns and complements various other international and European standards focusing on fastener performance, testing, and material specifications, such as:
- EN 1665 - Aerospace series - Fasteners with specified mechanical properties
- EN 2335 - Aerospace fasteners - Structural bolts and screws in alloy steel
- ISO 4762 - Hexagon socket head cap screws used widely in aerospace manufacturing
- MIL-STD-752 and AS9100 - Military and aerospace quality management systems and fastener requirements
Adopting EN 2897:1996 alongside these related standards facilitates compliance with comprehensive aerospace engineering and safety directives.
Keywords: aerospace screws, pan head screws, offset cruciform recess, alloy steel screws, cadmium plated fasteners, close tolerance screws, aerospace fastener standard, EN 2897:1996, high strength screws, elevated temperature fasteners
Get Certified
Connect with accredited certification bodies for this standard
DEKRA North America
DEKRA certification services in North America.
Eagle Registrations Inc.
American certification body for aerospace and defense.
Element Materials Technology
Materials testing and product certification.
Sponsored listings
Frequently Asked Questions
EN 2897:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °C". This standard covers: This standard specifies the characteristics of screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa / 235°C.
This standard specifies the characteristics of screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa / 235°C.
EN 2897:1996 is classified under the following ICS (International Classification for Standards) categories: 49.030.20 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 2897:1996 has the following relationships with other standards: It is inter standard links to EN IEC 61158-5-2:2019, EN 61158-5-2:2014, EN IEC 61158-5-2:2023, EN 1556:1998, prEN 2897. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 2897:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235 °CLuft- und Raumfahrt - Flachkopf-Paßschrauben mit Flügelkreuzschlitz, kurzes Gewinde, aus legiertem Stahl, verkadmet - Klasse: 1 100 MPa (bei Raumtemperatur)/235°CSérie aérospatiale - Vis a tete cylindrique, a empreinte cruciforme déportée, tige normale a tolérance serrée, filetage court, en acier allié, cadmiées - C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...