iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 659:2003+A1:2008/AC:2009

(Corrigendum)

Protective gloves for firefighters

Protective gloves for firefighters

TC - Correction of Figure 1 in the English language version

Feuerwehrschutzhandschuhe

Gants de protection pour sapeurs-pompiers

Zaščitne rokavice za gasilce

General Information

Status
Published
Publication Date
16-Jun-2009
ICS
13.340.40 - Hand and arm protection
Technical Committee
CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
Drafting Committee
CEN/TC 162/WG 8 - Protective gloves
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
17-Jun-2009
Completion Date
17-Jun-2009
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
93/68/EEC - Council Directive amending Dir. 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC and 73/23/EEC
93/95/EEC - Personal protective equipment (Dir. 89/686/EEC amendment)
96/58/EC - Personal protective equipment (Dir. 89/686/EEC amendment)
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
SIST EN 659:2003+A1:2008/AC:2009 - Protective gloves for firefighters

Relations

Corrects
EN 659:2003+A1:2008 - Protective gloves for firefighters
Effective Date
06-Jun-2009

Buy Standard

EN 659:2003+A1:2008/AC:2009EN 659:2003+A1:2008/AC:2009
PreviousNext
Corrigendum
EN 659:2003+A1:2008/AC:2009
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FeuerwehrschutzhandschuheGants de protection pour sapeurs-pompiersProtective gloves for firefighters13.340.40Varovanje dlani in rokHand and arm protection13.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 659:2003+A1:2008/AC:2009SIST EN 659:2003+A1:2008/AC:2009en01-oktober-2009SIST EN 659:2003+A1:2008/AC:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 659:2003+A1:2008/ACJune 2009Juin 2009Juni 2009ICS 13.340.40English versionVersion FrançaiseDeutsche FassungProtective gloves for firefightersGants de protection pour sapeurs-pompiersFeuerwehrschutzhandschuheThis corrigendum becomes effective on 17 June 2009 for incorporation in the official English versionof the EN.Ce corrigendum prendra effet le 17 juin 2009 pour incorpor
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 21420:2020/A1:2024(Amendment)
Protective gloves - General requirements and test methods - Amendment 1 (ISO 21420:2020/Amd 1:2022)
SIST EN ISO 21420:2020/A1:2024
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 8546:2022(Main)
Hand protection - Guidance for selection and use (ISO/TR 8546:2022)
SIST-TP CEN ISO/TR 8546:2022

This document gives information on the selection and use of personal protective equipment for the hand protection.
The application of this document requires that the risk assessment has been carried out and the hazards have been minimized accordingly through substitution and technical and organizational measures.
On this basis, this document contains information that supports employers in counteracting certain risks to hands that could not be sufficiently reduced by substitution and technical and organizational measures by selecting and using suitable protective gloves.
This document provides explanations on selection, usage and training applicable to protective gloves. The explanations concerning specific hazards are provided in annexes.
This guidance considers the following risks:
    mechanical, (see Annex A);
    chemical, (see Annex B);-    biological, (see Annex C);    thermal, (see Annex D and E);
    electrostatic discharge (see Annex F);
    ionizing radiation and radioactive contamination (see Annex G).
This guidance does not cover other risks, because pertinent international or national publications are available or because the relevant information was not available in ISO/TC 94/SC 13/WG 8. Risks not covered include e.g.:
    cuts and stabs by hand knives;
    use of chain saws (covered by ISO 11393-4:2018, Annex A);
    animal bites;
    needlesticks;
    electrocution;
    optical radiation;
    vibrations;
    electric fault arcs;
    firefighting (covered by ISO/TR 21808);
    sport.

  • Technical report
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20320:2020(Main)
Protective clothing for use in Snowboarding - Wrist Protectors - Requirements and test methods (ISO 20320:2020)
SIST EN ISO 20320:2020

This document specifies the requirements and test methods for ergonomics, innocuousness, comfort/sizing, restraint, ability to limit wrist extension and attenuate impact force on the palm as well as provisions for marking and instructions supplied by the manufacturer for wrist protectors for all users of snowboard equipment.
It does not apply to protectors used in roller sports, alpine skiing, or other sports. This document does not address protection for the forearm due to axial forces caused by an impact on the fingers or fist. Moreover, this document does not address protection against palmar flexion (terminal flexion) caused by an impact on the dorsal side of the hand.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 407:2020(Main)
Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)
SIST EN 407:2020

This document specifies requirements, test methods, marking and information for protective gloves and other hand protective equipment’s against thermal risks for professional use, consumer, domestic use.
This document is also applicable to arm protective equipment.
It is used for all gloves and other hand protective equipment’s which protect the hands or part of the hand against heat and/or fire in one or more of the following forms: flame, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal.
This standarddocument is only applicable in conjunction with EN ISO 21420:2020.
This document doesn’tdoes not apply to gloves for fire-fighters or welding that have their own standards.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21420:2020(Main)
Protective gloves - General requirements and test methods (ISO 21420:2020)
SIST EN ISO 21420:2020

This document specifies the general requirements and relevant test procedures for glove design and construction, innocuousness, comfort and efficiency, as well as the marking and information supplied by the manufacturer applicable to all protective gloves.
It can also apply to arm protectors and gloves permanently incorporated in containment enclosures.
Gloves and hand protectors such as mittens, pot holders and arm protection are covered by this document.
This document does not address the protective properties of gloves and therefore is not used alone but only in combination with the appropriate specific standard(s). A non-exhaustive list of these standards is given in the Bibliography.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 374-4:2019(Main)
Protective gloves against dangerous chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals (ISO 374-4:2019)
SIST EN ISO 374-4:2020

This document specifies the test method for the determination of the resistance of protective glove materials to degradation by dangerous chemicals with continuous contact.
NOTE       Annex A gives information on interlaboratory test results on this method.
It is preferable that other tests used in addition to the evaluation of chemical resistance such as permeation resistance and penetration, as the chemical test do not provide sufficient information on the physical property changes affecting a glove during exposure to a chemical. It is necessary that the outside surface of the glove be exposed to the chemical.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 374-2:2019(Main)
Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration (ISO 374-2:2019)
SIST EN ISO 374-2:2020

This document specifies a test method for the penetration resistance of gloves that protect against dangerous chemicals and/or micro-organisms.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11393-4:2019(Main)
Protective clothing for users of hand-held chainsaws - Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
SIST EN ISO 11393-4:2019

This document specifies the performance requirements, test methods, design requirements, identification and marking information for gloves that offer protection against cutting by hand-held chainsaws.
Guidance on chainsaw use and the selection of gloves is given in Annex A.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 388:2016+A1:2018(Main + Amendment)
Protective gloves against mechanical risks
SIST EN 388:2016+A1:2019

This European Standard specifies requirements, test methods, marking and information to be supplied for protective gloves against the mechanical risks of abrasion, blade cut, tear, puncture and, if applicable, impact.
This standard is intended to be used in conjunction with EN 420.
The test methods developed in this standard may also be applicable to arm protectors.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 374-1:2016/A1:2018(Amendment)
Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-1:2016/Amd 1:2018)
SIST EN ISO 374-1:2017/A1:2018

2021-01-12-JO-Formal Objection for the OJEU citation in support of the PPE Regulation

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day