EN 3745-301:2002
(Main)Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation
This standard specifies procedures for the practical measurement of the attenuation and variation in attenuation of optical fibre or optical cable (both hereafter referred to as fibre). Methods A and B are intended for fibre acceptance testing and shall be performed on fibre lengths greater than 1 km. Method C is intended for attenuation measurement required during environmental and mechanical testing and shall be performed on fibre lengths less than 100 m.
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 301: Optische Dämpfung
Diese Norm legt Verfahren für die praktische Messung der Dämpfung und Dämpfungsänderung von Lichtwellen-leitern und Lichtwellenleiterkabeln (beide nachstehend kurz LWL genannt) fest. Die Verfahren A und B sind für die Abnahmeprüfung von LWL bestimmt und an LWL-Längen über 1 km durchzuführen. Das Verfahren C ist für die Dämpfungsmessung, die bei Umwelt- und mechanischen Prüfungen gefordert wird, bestimmt und an LWL-Längen unter 100 m durchzuführen.
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 301: Atténuation
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation
General Information
- Status
- Withdrawn
- Publication Date
- 11-Jun-2002
- Withdrawal Date
- 15-May-2012
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 2 - Electrical
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-May-2012
- Completion Date
- 16-May-2012
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 3745-301:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation". This standard covers: This standard specifies procedures for the practical measurement of the attenuation and variation in attenuation of optical fibre or optical cable (both hereafter referred to as fibre). Methods A and B are intended for fibre acceptance testing and shall be performed on fibre lengths greater than 1 km. Method C is intended for attenuation measurement required during environmental and mechanical testing and shall be performed on fibre lengths less than 100 m.
This standard specifies procedures for the practical measurement of the attenuation and variation in attenuation of optical fibre or optical cable (both hereafter referred to as fibre). Methods A and B are intended for fibre acceptance testing and shall be performed on fibre lengths greater than 1 km. Method C is intended for attenuation measurement required during environmental and mechanical testing and shall be performed on fibre lengths less than 100 m.
EN 3745-301:2002 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 3745-301:2002 has the following relationships with other standards: It is inter standard links to EN 3745-301:2012, EN 4641-101:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 3745-301:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: AttenuationLuft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 301: Optische DämpfungSérie aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais - Partie 301: AtténuationAerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3745-301:2002SIST EN 3745-301:2004en01-maj-2004SIST EN 3745-301:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3745-301June 2002ICS 49.060English versionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 301: AttenuationSérie aérospatiale - Fibres et câbles optiques à usageaéronautique - Méthodes d'essais - Partie 301: AtténuationLuft- und Raumfahrt - Faseroptische Leitungen fürLuftfahrzeuge - Prüfverfahren - Teil 301: OptischeDämpfungThis European Standard was approved by CEN on 1 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-301:2002 ESIST EN 3745-301:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...