EN 10248-2:1995
(Main)Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
This part of this European standard specifies the tolerances on dimensions, squareness of ends, straightness and mass of hot rolled non alloy steel sheet piles which are defined in EN 10248-1.
Warmgewalzte Spundbohlen aus unlegierten Stählen - Teil 2: Grenzabmaße und Formtoleranzen
In diesem Teil der Europäischen Norm sind die Grenzabmaße, der Höhe, Breite, Wanddicke und Länge sowie die Grenzabweichungen des Schnitts rechtwinklig zur Längsachse, der Geradheit und der Masse von warmgewalzten unlegierten Spundbohlen nach EN 10248-1 festgelegt.
Palplanches laminées à chaud en aciers non alliés - Partie 2: Tolérances sur forme et dimensions
La présente partie de la présente norme européenne spécifie les tolérances relatives aux dimensions, à l'équerrage des extrémités, à la rectitude et à la masse des palplanches laminées à chaud en aciers non alliés dans l'EN 10248-1.
Vroče valjana obešala iz nelegiranih jekel - 2. del: Mejni odstopki mer in tolerance oblik
General Information
- Status
- Withdrawn
- Publication Date
- 14-Jun-1995
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10/SC 4 - Sheet piling
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Jul-2024
- Completion Date
- 21-Jan-2026
Relations
- Replaced By
EN 10248-2:2024 - Hot-rolled steel sheet piles - Part 2: Tolerances on dimensions and shape - Effective Date
- 28-Jan-2023
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 10248-2:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions". This standard covers: This part of this European standard specifies the tolerances on dimensions, squareness of ends, straightness and mass of hot rolled non alloy steel sheet piles which are defined in EN 10248-1.
This part of this European standard specifies the tolerances on dimensions, squareness of ends, straightness and mass of hot rolled non alloy steel sheet piles which are defined in EN 10248-1.
EN 10248-2:1995 is classified under the following ICS (International Classification for Standards) categories: 77.140.70 - Steel profiles. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10248-2:1995 has the following relationships with other standards: It is inter standard links to EN 10248-2:2024, EN 12699:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10248-2:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REOLNWarmgewalzte Spundbohlen aus unlegierten Stählen - Teil 2: Grenzabmaße und FormtoleranzenPalplanches laminées a chaud en aciers non alliés - Partie 2: Tolérances sur forme et dimensionsHot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jeklaNon-a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...