EN ISO 15546:2002

SLOVENSKI STANDARD
SIST EN ISO 15546:2004
01-maj-2004
Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002)
Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002)
Erdöl- und Erdgasindustrie - Bohrrohre aus Aluminiumlegierungen (ISO 15546:2002)
Industries du pétrole et du gaz naturel - Tige de forage en alliage d'aluminium (ISO
15546:2002)
Ta slovenski standard je istoveten z: EN ISO 15546:2002
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
77.150.10 Aluminijski izdelki Aluminium products
SIST EN ISO 15546:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 15546
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2002
ICS 75.180.10; 77.150.10
English version
Petroleum and natural gas industries - Aluminium alloy drill pipe
(ISO 15546:2002)
Industries du pétrole et du gaz naturel - Tige de forage en
alliage d'aluminium (ISO 15546:2002)
This European Standard was approved by CEN on 27 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15546:2002 E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 15546:2002 (E)
Foreword
This document (EN ISO 15546:2002) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum and natural gas industries", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2003, and conflicting national
standards shall be withdrawn at the latest by June 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
NOTE FROM CMC  The foreword is susceptible to be amended on reception of the German
language version. The confirmed or amended foreword, and when appropriate, the normative
annex ZA for the references to international publications with their relevant European
publications will be circulated with the German version.
Endorsement notice
The text of ISO 15546:2002 has been approved by CEN as EN ISO 15546:2002 without any
modifications.
2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 15546
First edition
2002-12-15

Petroleum and natural gas industries —
Aluminium alloy drill pipe
Industries du pétrole et du gaz naturel — Tige de forage en alliage
d'aluminium




Reference number
ISO 15546:2002(E)
©
ISO 2002

---------------------- Page: 4 ----------------------

ISO 15546:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use
...