EN 13102:2005+A1:2008
(Main)Ceramic machines - Safety - Loading and unloading of fine clay tiles
Ceramic machines - Safety - Loading and unloading of fine clay tiles
This European Standard applies to:
- machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports (see Figure A.1);
- machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers (see Figures A.2 and A.4);
- machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames (see Figure A.3).
1.2 This European Standard deals with the significant hazards, hazardous situations and events relevant to ceramic machines for loading and unloading of fine clay tiles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not deal with noise. This standard deals with the preventive measures to minimise these hazards arising from the commissioning, the operation and maintenance.
1.3 The interface with the transport system for stacks, containers is covered by this European Standard for some examples not for all possibilities (see e.g. 5.6.4, 5.6.7).
1.4 This European Standard is not applicable to:
- machines for setting and dehacking of split tiles and roof tiles;
- auxiliary machinery such as vacuum generators.
1.5 This European Standard is not applicable to machines, which are manufactured before the date of publication of this European Standard by CEN.
Keramikmaschinen - Sicherheit - Beladen und Entladen von feinkeramischen Platten
1.1 Diese Europäische Norm gilt für:
- Maschinen für das Aufstapeln und Abstapeln gebrannter oder ungebrannter feinkeramischer Wandfliesen und
Fußbodenplatten auf/von feste(n) oder bewegliche(n) Unterlagen (siehe Bild A.1);
- Maschinen für das Beladen oder Entladen gebrannter oder ungebrannter feinkeramischer Wandfliesen und
Fußbodenplatten in/aus Container(n) (siehe Bilder A.2 und A.4);
- Maschinen zum Beladen und Entladen gebrannter oder ungebrannter feinkeramischer Wandfliesen und
Fußbodenplatten auf/von stapelbare(n) Rahmen (siehe Bild A.3).
1.2 ! Diese Europäische Norm behandelt die signifikanten Gefährdungen, Gefährdungssituationen und
Gefährdungsereignisse, die auf Keramikmaschinen zum Beladen und Entladen von feinkeramischen Platten
zutreffen, wenn sie bestimmungsgemäß und unter den Bedingungen des Missbrauchs, die vernünftigerweise vom
Hersteller vorhersehbar sind, verwendet werden (siehe Abschnitt 4). Diese Europäische Norm behandelt Lärm
nicht. Diese Europäische Norm befasst sich mit den Schutzmaßnahmen zur Verringerung dieser Gefährdungen,
die während der Inbetriebnahme, des Betriebs und der Instandhaltung entstehen.“"
1.3 Die Verknüpfung mit dem Transportsystem für Stapel, Container ist in diesem Dokument in einigen
Beispielen aber nicht für alle möglichen Anwendungen behandelt (siehe z. B. 5.6.4, 5.6.7).
1.4 Diese Europäische Norm ist nicht anwendbar auf:
- Maschinen zum Setzen und Abstapeln von Spaltplatten und Dachziegeln;
- Hilfsaggregate, wie Vakuumerzeuger.
1.5 Diese Europäische Norm gilt nicht für Maschinen, die hergestellt wurden, bevor CEN diese Europäische
Norm veröffentlichte.
Machines de la céramique - Sécurité - Chargement et déchargement de carreaux céramiques
1.1 La présente Norme européenne s’applique :
aux machines d’empilage ou de dépilage de carreaux muraux ou de carreaux pour sols, en céramique cuite ou non cuite, sur des supports fixes ou mobiles (voir Figure A.1) ;
aux machines de chargement ou de déchargement de carreaux muraux ou de carreaux pour sols, en céramique cuite ou non cuite, sur des conteneurs (voir Figures A.2 et A.4) ;
aux machines de chargement ou de déchargement de carreaux muraux ou de carreaux pour sols, en céramique cuite ou non cuite, sur des palettes superposables (voir Figure A.3).
1.2 !La présente Norme européenne traite des phénomènes dangereux, des situations dangereuses et des évènements dangereux significatifs relatifs aux machines de la céramique destinées au chargement et au déchargement des carreaux céramiques, lorsque ces machines sont utilisées comme prévu et dans les conditions de mauvais usage prévisibles par le fabricant (voir Article 4). La présente Norme européenne ne traite pas des émissions de bruit. Elle traite des mesures préventives à prendre afin de réduire le plus possible les phénomènes dangereux susceptibles de se produire lors de la mise en service, de l’exploitation et de l’entretien."
1.3 L'interface avec le système de transport des piles et conteneurs est couverte par la présente norme européenne pour quelques exemples, mais pas pour toutes les possibilités (voir par exemple 5.6.4, 5.6.7).
1.4 La présente Norme européenne n'est pas applicable :
aux machines d'empilage et de dépilage de carreaux étirés et tuiles ;
aux machines auxiliaires, comme les élévateurs à aspiration.
1.5 La présente Norme européenne n’est pas applicable aux machines qui ont été fabriquées avant la date de publication de la présente Norme européenne par le CEN.
Stroji za keramiko - Varnost - Natovarjanje in raztovarjanje finih keramičnih ploščic
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Keramikmaschinen - Sicherheit - Beladen und Entladen von feinkeramischen PlattenMachines de la céramique - Sécurité - Chargement et déchargement de carreaux céramiquesCeramic machines - Safety - Loading and unloading of fine clay tiles81.100Equipment for the glass and ceramics industriesICS:Ta slovenski standard je istoveten z:EN 13102:2005+A1:2008SIST EN 13102:2006+A1:2009en01-januar-2009SIST EN 13102:2006+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13102:2005+A1
November 2008 ICS 81.100 Supersedes EN 13102:2005 English Version
Ceramic machines - Safety - Loading and unloading of fine clay tiles
Machines de la céramique - Sécurité - Chargement et déchargement de carreaux céramiques
Keramikmaschinen - Sicherheit - Beladen und Entladen von feinkeramischen Platten This European Standard was approved by CEN on 12 October 2005 and includes Amendment 1 approved by CEN on 12 October 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13102:2005+A1:2008: ESIST EN 13102:2006+A1:2009
Examples of loading/unloading machines.14 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directives 98/37/EC.16 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC"""".17
When compiling this standard it was assumed that: only trained persons work at the machine; components without specific requirements are: a) designed in accordance with the usual engineering practice and calculation codes, including all failure modes; b) of solid mechanical and electrical construction; c) made of materials with adequate strength and of suitable quality; general electrical hazards according to electrical safety standard EN 60204-1:1997; general hazards due to hydraulic, pneumatic equipment are dealt with according to relevant standards for common use such as EN 982:1996 and EN 983:1996; components are kept in good repair and working order, so that the required characteristics remain despite wear; specifications have been met about interface with other machinery. !deleted text" When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. SIST EN 13102:2006+A1:2009
1 Scope 1.1 This European Standard applies to: machines for stacking or dehacking fired or unfired fine clay wall tiles and floor tiles on/from fixed or movable supports (see Figure A.1); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles into/from containers (see Figures A.2 and A.4); machines for loading or unloading fired or unfired fine clay wall tiles and floor tiles on/from stackable frames (see Figure A.3). 1.2 !This European Standard deals with the significant hazards, hazardous situations and events relevant to ceramic machines for loading and unloading of fine clay tiles, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not deal with noise. This European Standard deals with the preventive measures to minimise these hazards arising from the commissioning, the operation and maintenance." 1.3 The interface with the transport system for stacks, containers is covered by this European Standard for some examples not for all possibilities (see e.g. 5.6.4, 5.6.7). 1.4 This European Standard is not applicable to: machines for setting and dehacking of split tiles and roof tiles; auxiliary machinery such as vacuum generators. 1.5 This European Standard is not applicable to machines, which are manufactured before the date of publication of this European Standard by CEN.
2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery — Safety distance to prevent danger zones being reached by the upper limbs EN 349:1993, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 418:1992, Safety of machinery — Emergency stop equipment, functional aspects — Principles for design EN 619:2002, Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 954-1:1996, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design EN 982:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Hydraulics SIST EN 13102:2006+A1:2009
device used to pick up items, e.g. stackable frames 3.3 container movable rack used for transport and/or as a buffer store for tiles awaiting further processing 3.4 movable stacker
automatic device, being able to change position in two or more directions, designed for building columns of frames or tiles 3.5 compensator equipment being able to collect surplus tiles and to deliver them if required SIST EN 13102:2006+A1:2009
Hazards Danger zone/Dangerous item Preventive measures see clause 4.1 Setting in stacks on fixed or movable supports (see Figure A.1)
4.1.1 Crushing, entanglement and impact movement of the movable stacker (setting/dehacking device, vacuum device) 5.2.1, 5.4 4.1.2 Falling objects carried tiles from the vacuum device 5.3 4.2 Loading into containers
4.2.1 Crushing, entanglement between rollers and devices which form rows or between roller and horizontal rods of containers 5.5.1 4.2.2 Crushing downward movement of containers or of compensator or of roller and telescopic arm 5.2.1, 5.5.2 4.2.3 Crushing, shearing, entanglement and being trapped horizontal movement of containers 5.6 4.3 Setting on stackable frames
4.3.1 Crushing, entanglement and impact movement of the stacker with or without frames 5.2.1 4.4 Platforms accessible to persons
4.4.1 Crushing by running machinery, between fixed and vertically moving parts 5.7.2, 5.7.4 4.5 General
4.5.1 Impossibility of stopping in the best possible conditions, unexpected start-up vacuum, external devices for container movement, machinery 5.3.3, 5.6.7, 5.7.2 4.5.2 Crushing, drawing-in conveyors 5.2.3 4.5.3 Break-up suspended parts 5.2.2, 5.7.3 4.5.4 Trip and fall persons 5.7.1, 5.8.1, 5.8.2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.