EN ISO 8099-2:2021
(Main)Small craft - Waste systems - Part 2: Sewage treatment systems (ISO 8099-2:2020)
Small craft - Waste systems - Part 2: Sewage treatment systems (ISO 8099-2:2020)
This document specifies requirements for the design, construction and installation of sewage treatment systems on small craft.
It does not address waste retention systems, nor accidental discharge prevention of pollutants (e.g. oil, fuel) overboard.
It does not address the technical discharge limits of a sewage treatment unit, subject to certain international as well as national regulations.
Kleine Wasserfahrzeuge - Abfallsysteme - Teil 2: Abwasserbehandlung (ISO 8099-2:2020)
Dieses Dokument legt die Anforderungen für Entwurf, Konstruktion und Montage von Schwarzwasser¬-Aufbereitungseinheiten auf kleinen Wasserfahrzeugen fest.
Dieses Dokument befasst sich weder mit Abfallrückhaltesystemen noch mit der Verhinderung der unbeabsichtigten Freisetzung von Schadstoffen (z. B. Öl, Brennstoff) nach außenbords.
Dieses Dokument befasst sich nicht mit den technischen Freisetzungsgrenzwerten einer Schwarzwasser¬-Aufbereitungseinheit, da diese Gegenstand bestimmter internationaler und nationaler Vorschriften sind.
Petits navires - Circuits d'eaux usées - Partie 2: Traitement des eaux usées (ISO 8099-2:2020)
Le présent document spécifie les exigences relatives à la conception, la construction et l'installation des systèmes de traitement des eaux usées sur les petits navires.
Ce document ne traite pas des systèmes de rétention des déchets, ni de la prévention des rejets accidentels de polluants (huile, carburant, etc.) par-dessus bord.
Il ne traite pas des limites techniques de rejets d'une unité de traitement des eaux usées, celles-ci étant soumises à certaines réglementations internationales et nationales.
Mala plovila - Sistemi ravnanja z odpadki - 2. del: Sistemi za čiščenje odplak (ISO 8099-2:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8099-2:2021
01-junij-2021
Mala plovila - Sistemi ravnanja z odpadki - 2. del: Sistemi za čiščenje odplak (ISO
8099-2:2020)
Small craft - Waste systems - Part 2: Sewage treatment systems (ISO 8099-2:2020)
Kleine Wasserfahrzeuge - Abfallsysteme - Teil 2: Abwasserbehandlung (ISO 8099-
2:2020)
Petits navires - Circuits d'eaux usées - Partie 2: Traitement des eaux usées (ISO 8099-
2:2020)
Ta slovenski standard je istoveten z: EN ISO 8099-2:2021
ICS:
13.030.01 Odpadki na splošno Wastes in general
47.080 Čolni Small craft
SIST EN ISO 8099-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8099-2:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 8099-2:2021
EN ISO 8099-2
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2021
EUROPÄISCHE NORM
ICS 47.080
English Version
Small craft - Waste systems - Part 2: Sewage treatment
systems (ISO 8099-2:2020)
Petits navires - Circuits d'eaux usées - Partie 2: Kleine Wasserfahrzeuge - Abfallsysteme - Teil 2:
Traitement des eaux usées (ISO 8099-2:2020) Abwasserbehandlung (ISO 8099-2:2020)
This European Standard was approved by CEN on 20 August 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8099-2:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8099-2:2021
EN ISO 8099-2:2021 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8099-2:2021
EN ISO 8099-2:2021 (E)
European foreword
This document (EN ISO 8099-2:2021) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2021, and conflicting national standards shall
be withdrawn at the latest by October 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8099-2:2020 has been approved by CEN as EN ISO 8099-2:2021 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8099-2:2021
EN ISO 8099-2:2021 (E)
Annex Z
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.