EN 993-10:1997
(Main)Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating
Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating
This European standard describes three methods for the determination of the permanent change in dimensions on heating of dense shaped refractory products. Note: The method can be applied to materials sensitive to oxidation. However, some of these materials can be affected during the test in such a way as to make the measurement of the dimensional changes impossible to carry out to the required accuracy.
Prüfverfahren für dichte geformte feuerfeste Erzeugnisse - Teil 10: Bestimmung der bleibenden Längenänderung nach Temperatureinwirkung
Diese europäische Norm legt drei Verfahren zur Bestimmung der bleibenden Längenänderung an dichten geformten feuerfesten Erzeugnissen nach Temperatureinwirkung fest. Anmerkung: Das Verfahren kann auf oxydationsfreudige Werkstoffe angewendet werden. Einige dieser Werkstoffe können jedoch während der Prüfung so beeinträchtigt werden, daß die Messung der Längenänderung mit der geforderten Genauigkeit nicht möglich ist.
Méthodes d'essai pour produits réfractaires façonnés denses - Partie 10: Détermination de la variation permanente de dimensions sous l'action de la chaleur
La présente norme européenne spécifie trois méthodes permettant de déterminer la variation permanente de dimensions d'un produit réfractaire façonné dense sous l'action de la chaleur. Note: Cette méthode peut s'appliquer aux produits sensibles à l'oxydation. Cependant, certains d'entre eux peuvent être altérés au cours de l'essai, rendant impossible la mesure des variations dimensionnelles avec la précision requise.
Metode za preskušanje gostih oblikovanih ognjevzdržnih izdelkov - 10. del: Ugotavljanje trajnih sprememb mer pri segrevanju
General Information
- Status
- Withdrawn
- Publication Date
- 18-Nov-1997
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 187 - Refractory products and materials
- Drafting Committee
- CEN/TC 187/WG 1 - Dense shaped refractory products
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-Oct-2020
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 29-May-2019
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 993-10:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating". This standard covers: This European standard describes three methods for the determination of the permanent change in dimensions on heating of dense shaped refractory products. Note: The method can be applied to materials sensitive to oxidation. However, some of these materials can be affected during the test in such a way as to make the measurement of the dimensional changes impossible to carry out to the required accuracy.
This European standard describes three methods for the determination of the permanent change in dimensions on heating of dense shaped refractory products. Note: The method can be applied to materials sensitive to oxidation. However, some of these materials can be affected during the test in such a way as to make the measurement of the dimensional changes impossible to carry out to the required accuracy.
EN 993-10:1997 is classified under the following ICS (International Classification for Standards) categories: 81.080 - Refractories. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 993-10:1997 has the following relationships with other standards: It is inter standard links to EN 993-10:2020, EN ISO 13628-6:2006, EN ISO 4619:2010, EN ISO 11908:1998, EN ISO 15880:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 993-10:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
Metode za preskušanje gostih oblikovanih ognjevzdržnih izdelkov - 10. del:
Ugotavljanje trajnih sprememb mer pri segrevanju
Methods of test for dense shaped refractory products - Part 10: Determination of
permanent change in dimensions on heating
Prüfverfahren für dichte geformte feuerfeste Erzeugnisse - Teil 10: Bestimmung der
bleibenden Längenänderung nach Temperatureinwirkung
Méthodes d'essai pour produits réfractaires façonnés denses - Partie 10: Détermination
de la variation permanente de dimensions sous l'action de la chaleur
Ta slovenski standard je istoveten z: EN 993-10:1997
ICS:
81.080 Ognjevzdržni materiali Refractories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...