EN ISO 13533:2001

SLOVENSKI STANDARD
01-maj-2004
Industrija za predelavo nafte in zemeljskega plina - Vrtalna in proizvodna oprema -
Oprema za prevrtavanje (ISO 13533:2001)
Petroleum and natural gas industries - Drilling and production equipment - Drill-through
equipment (ISO 13533:2001)
Erdöl- und Erdgasindustrie - Bohr- und Fördereinrichtungen - Drill-through equipment
(ISO 13533:2001)
Industries du pétrole et du gaz naturel - Equipements de forage et de production -
Equipements a travers lesquels s'effectue le forage (ISO 13533:2001)
Ta slovenski standard je istoveten z: EN ISO 13533:2001
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13533
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 75.180.10
English version
Petroleum and natural gas industries - Drilling and production
equipment - Drill-through equipment (ISO 13533:2001)
Industries du pétrole et du gaz naturel - Equipements de Erdöl- und Erdgasindustrie - Bohr- und Fördereinrichtungen
forage et de production - Equipements à travers lesquels - Drill-through equipment (ISO 13533:2001)
s'effectue le forage (ISO 13533:2001)
This European Standard was approved by CEN on 17 November 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13533:2001 E
worldwide for CEN national Members.

CORRECTED  2002-09-25
Foreword
This document (EN ISO 13533:2001) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum and natural gas industries", the secretariat of which is held by
AFNOR.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by June 2002, and conflicting national
standards shall be withdrawn at the latest by June 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of ISO 13533:2001 has been approved by CEN as EN ISO 13533:2001 without any
modifications.
NOTE  Normative references to International Standards are listed in Annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 6506-1 1999 Metallic materials - Brinell hardness test - EN ISO 6506-1 1999
Part 1: Test method
ISO 6507-1 1997 Metallic materials - Vickers hardness test EN ISO 6507-1 1997
- Part 1: Test method
ISO 6508-1 1999 Metallic materials - Rockwell hardness EN ISO 6508-1 1999
test - Part 1: Test method (scales A, B,
C, D, E, F, G, H, K, N, T)
ISO 10423 2001 Petroleum and natural gas industries - EN ISO 10423 2001
Drilling and production equipment -
Wellhead and christmas tree equipment
ISO 11961 1996 Petroleum and natural gas industries - EN ISO 11961 1996
Steel pipes for use as drill pipe -
Specification
INTERNATIONAL ISO
STANDARD 13533
First edition
2001-12-01
Petroleum and natural gas industries —
Drilling and production equipment — Drill-
through equipment
Industries du pétrole et du gas naturel — Équipements de forage et de
production — Équipements à travers lesquels s'effectue le forage

Reference number
ISO 13533:2001(E)
©
ISO 2001
ISO 13533:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

ISO 13533:2001(E)
Contents Page
Foreword.v
Introduction.vi
1 Scope .1
2 Normative references.4
3 Terms and definitions .5
4 Abbreviated terms .12
5 Design requirements.13
5.1 Size designation .13
5.2 Service conditions.13
5.3 Equipment-specific design requirements.14
5.4 Design methods.31
5.5 Design verification testing.33
5.6 Documentation.33
5.7 Tests for BOP and hydraulic connector operational characteristics.34
5.8 Design temperature verification testing for non-metallic sealing materials and moulded
sealing assemblies.38
5.9 Operating manual requirements .39
6 Material requirements .40
6.1 General.40
6.2 Written specifications .40
6.3 Pressure-containing members.41
7 Welding requirements.47
7.1 General.47
7.2 Weldment design and configuration .47
7.3 Welding controls.51
7.4 Welding procedure and performance qualifications .52
7.5 Other requirements .53
8 Quality control requirements .56
8.1 General.56
8.2 Measuring and testing equipment .57
8.3 Quality control personnel qualifications.57
8.4 Quality control requirements for equipment and parts .57
8.5 Quality control requirements for specific equipment and parts .58
8.6 Requirements for quality control records.70
9 Marking requirements .72
9.1 General.72
9.2 Types of identification stamping .72
9.3 Specific codification requirements of equipment .72
9.4 Product description code (PDC) .75
10 Storing and shipping.77
10.1 Storing for periods greater than 30 days .77
10.2 Shipping.77
Annex A (normative) Qualification of heat-treating equipment.78
Annex B (normative) Requirements for repair and remanufacture.81
Annex C (informative) Operational characteristics test procedure .86
ISO 13533:2001(E)
Annex D (informative) Procedure for design temperature verification testing.94
Annex E (informative) Purchasing guidelines .
...