EN 4710-06:2015
(Main)Aerospace series - Quick release fastening systems for non-structural applications - Part 06: Stud - quick-release and locking
Aerospace series - Quick release fastening systems for non-structural applications - Part 06: Stud - quick-release and locking
This European Standard specifies the dimensions, mass, tolerances and static values of stud - quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area.
This European Standard is to be used in conjunction with EN 4710-03, EN 4710-04, EN 4710-05 and EN 4710-07 as described in EN 4710-02.
The applicable temperature range is -55 °C to 85 °C.
Luft- und Raumfahrt - Schnellverschlüsse für nicht-strukturelle Anwendungen - Teil 06: Bolzen - Schnell auslösend und schließend
Diese Europäische Norm legt die Maße, Massen, Toleranzen und statischen Werte von Bolzen, schnell auslösend und schließend fest, die bei der Inneneinrichtung von Luftfahrzeugen und in nicht strukturellen oder Sekun¬därstrukturbereichen verwendet werden.
Diese Europäische Norm ist in Verbindung mit EN 4710 03, EN 4710 04, EN 4710 05 und EN 4710 07 wie in EN 4710 02 beschrieben anzuwenden.
Der gültige Temperaturbereich ist zwischen −55 °C und 85 °C.
Série aérospatiale - Fixations rapides filetées pour applications non-structurales - Partie 06 : Pion à démontage et à verrouillage rapide
La présente Norme européenne spécifie les dimensions, la masse, les tolérances et les valeurs statiques des pions à démontage et à verrouillage rapide pour utilisation dans les équipements intérieurs et dans les zones non structurales ou structurales secondaires du fuselage.
La présente Norme européenne doit être utilisée conjointement avec les EN 4710-03, EN 4710-04, EN 4710-05 et EN 4710-07 comme décrit dans l’EN 4710 02.
La gamme de température applicable est comprise entre - 55 °C et 85 °C.
Aeronavtika - Spončni sistemi za hitro sprostitev za nestrukturne aplikacije - 006. del: Stojni vijak - hitro sproščanje in zapiranje
Ta evropski standard določa dimenzije, maso, tolerance in statične vrednosti stojnega vijaka za hitro sproščanje in zapiranje za uporabo v notranji opremi v trupu letala ter nestrukturnem ali sekundarnem strukturnem območju.
Ta evropski standard je treba uporabljati v povezavi s standardi EN 4710-03, EN 4710-04, EN 4710-05 in
EN 4710-07, kot je opisano v standardu EN 4710-02. Delovna temperatura je med –55 °C in 85 °C.
General Information
- Status
- Published
- Publication Date
- 06-Oct-2015
- Withdrawal Date
- 29-Apr-2016
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 3 - Mechanical
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 07-Oct-2015
- Completion Date
- 07-Oct-2015
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN 4710-06:2015 is a European standard within the aerospace series that defines quick release fastening systems specifically for non-structural applications. This part 06 focuses on the stud type - quick-release and locking mechanisms primarily used in fuselage interior equipment and other non-structural or secondary structural areas of aerospace vehicles.
The standard specifies precise dimensions, mass, tolerances, and static mechanical values for stud components, ensuring consistent performance under operating conditions ranging from -55 °C to 85 °C. EN 4710-06:2015 is intended to be applied in conjunction with related parts of the EN 4710 series (EN 4710-03 to EN 4710-07), as outlined by EN 4710-02 for complete fastening solutions.
Key Topics
Scope & Application
Defines the use cases for quick-release stud fastening systems in aerospace non-structural assemblies, such as interior panels and secondary structural components.Dimensions & Tolerances
Detailed specifications for stud configurations, including length, diameter, and grip range, following ISO 2768-mK general tolerances to ensure interchangeability.Mechanical Properties
Specifies ultimate tensile, shear, push-in, and torque-out loads to guarantee mechanical reliability during aerospace operation.Materials & Surface Treatments
Covers stainless steel (1.4301) and copper alloys (CuZn39Pb3 or CuZn39Pb2) with appropriate passivation or electrodeposited coatings for corrosion resistance.Marking & Identification
Sets requirements for product and package marking in accordance with EN 2424 to maintain traceability and conformity.Testing & Qualification
Defines acceptance and qualification tests, including endurance cycles (500 to 1,500, depending on material), dimensional inspection, load tests, corrosion resistance, and functionality as per EN 4710-01.
Applications
EN 4710-06:2015 is essential for aerospace manufacturers and suppliers involved in designing and producing non-structural quick release fasteners such as:
- Aircraft fuselage interior equipment attachments
- Secondary structural component fastening where rapid assembly/disassembly is needed
- Interior paneling and access points requiring strong, reliable but easily removable fasteners
- Maintenance and repair operations benefiting from standardized, quick-release studs
- Systems requiring performance across wide temperature ranges and durability
Adoption of this standard helps improve safety, interchangeability, and maintenance efficiency in aerospace vehicle assembly and lifecycle management.
Related Standards
EN 4710-06:2015 is part of the aerospace quick release fastening systems series and should be used alongside these related European standards for comprehensive system implementation:
- EN 4710-01 - Technical specifications for quick release fastening systems
- EN 4710-02 - Spring clamp stud combination, general principles
- EN 4710-03 to EN 4710-05 - Various spring clamp types with tolerance compensation options
- EN 4710-07 - Retaining grommets compatible with stud fastening systems
- EN 2424 - Marking of aerospace products
- EN 2516 - Passivation and corrosion decontamination treatments for stainless steels and nickel alloys
Following this standard alongside related parts ensures compliant design, manufacturing, and quality assurance of aerospace non-structural quick release fastening systems.
Keywords: EN 4710-06:2015, aerospace standard, quick release fastening, stud locking, non-structural aerospace fasteners, fuselage interior equipment, mechanical properties, aerospace materials, aerospace tolerances, corrosion resistance, aerospace marking, aerospace testing, aerospace quick-release stud
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 4710-06:2015 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Quick release fastening systems for non-structural applications - Part 06: Stud - quick-release and locking". This standard covers: This European Standard specifies the dimensions, mass, tolerances and static values of stud - quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area. This European Standard is to be used in conjunction with EN 4710-03, EN 4710-04, EN 4710-05 and EN 4710-07 as described in EN 4710-02. The applicable temperature range is -55 °C to 85 °C.
This European Standard specifies the dimensions, mass, tolerances and static values of stud - quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area. This European Standard is to be used in conjunction with EN 4710-03, EN 4710-04, EN 4710-05 and EN 4710-07 as described in EN 4710-02. The applicable temperature range is -55 °C to 85 °C.
EN 4710-06:2015 is classified under the following ICS (International Classification for Standards) categories: 49.035 - Components for aerospace construction. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 4710-06:2015 has the following relationships with other standards: It is inter standard links to EN 10088-3:2023, EN 12165:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 4710-06:2015 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Druckverschlüsse nicht-strukturelle Anwendungen - Teil 006: Bolzen - Schnell Auslösend und SchließendSérie aérospatiale - Fixations rapides filetées pour applications non-structurales - Partie 006 : Pion à démontage et à verrouillage rapideAerospace series - Quick release fastening systems for non-structural applications - Part 006: Stud - quick-release and locking49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 4710-06:2015SIST EN 4710-006:2015en,fr,de01-december-2015SIST EN 4710-006:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4710-06
October
t r s w ICS
v {ä r u w English Version
Aerospace series æ Quick release fastening systems for nonæstructural applications æ Part
r xã Stud æ quickærelease and locking Sßrie aßrospatiale æ Fixations rapides filetßes pour applications nonæstructurales æ Partie
r x ã Pion à dßmontage et à verrouillage rapide
Luftæ und Raumfahrt æ Schnellverschlüsse für nichtæstrukturelle Anwendungen æ Teil
r xã Bolzen æ Schnell auslösend und schließend This European Standard was approved by CEN on
w March
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v y s ræ r xã t r s w ESIST EN 4710-006:2015
Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Requirements . 5 4 Designation. 8 5 Marking . 9 6 Technical specification . 9
This European Standard is to be used in conjunction with EN 4710-03, EN 4710-04, EN 4710-05 and EN 4710-07 as described in EN 4710-02. The applicable temperature range is -55 °C to 85 °C. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...