EN ISO 11073-10427:2018

SLOVENSKI STANDARD
01-september-2018
Zdravstvena informatika - Komunikacija osebnih medicinskih naprav - 10427. del:
Specialne naprave - Nadzor stanja napajanja za osebne medicinske naprave
(ISO/IEEE 11073-10427:2018)
Health informatics - Personal health device communication - Part 10427: Device
specialization - Power status monitor of personal health devices (ISO/IEEE 11073-
10427:2018)
Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -
Teil 10427: Gerätespezifikation - Monitor für den Energiestatus von Geräten für die
persönliche Gesundheit (ISO/IEEE 11073-10427:2018))
Informatique de santé - Communication entre dispositifs de santé personnels - Partie
10427: Spécialisation des dispositifs - Moniteur de l'état de puissance des dispositifs de
santé personnels (ISO/IEEE 11073-10427:2018)
Ta slovenski standard je istoveten z: EN ISO 11073-10427:2018
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11073-10427
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 35.240.80
English Version
Health informatics - Personal health device
communication - Part 10427: Device specialization -
Power status monitor of personal health devices(ISO/IEEE
11073-10427:2018)
Informatique de santé - Communication entre Medizinische Informatik - Kommunikation von Geräten
dispositifs de santé personnels - Partie 10427: für die persönliche Gesundheit - Teil 10427:
Spécialisation des dispositifs - Moniteur de l'état de Gerätespezifikation - Monitor für den Energiestatus
puissance des dispositifs de santé personnels von persönlichen gesundheitsbezogenen Geräten
(ISO/IEEE 11073-10427:2018) (ISO/IEEE 11073-10427:2018)
This European Standard was approved by CEN on 13 March 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-10427:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 11073-10427:2018) has been prepared by Technical Committee ISO/TC 215
"Health informatics" in collaboration with Technical Committee CEN/TC 251 “Health informatics” the
secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11073-10427:2018 has been approved by CEN as EN ISO 11073-10427:2018 without
any modification.
INTERNATIONAL
ISO/IEEE
STANDARD
11073-1042711073-10427
First edition
2018-01
Health informatics — Personal health
device communication —
Part 10427:
Device specialization — Power status
monitor of personal health devices
Informatique de santé — Communication entre dispositifs de santé
personnels —
Partie 10427: Spécialisation des dispositifs — Moniteur de l’état de
puissance des dispositifs de santé personnels
Reference number
ISO/IEEE 11073-10427:2018(E)
© IEEE 201 7
ISO/IEEE 11073-10427:2018(E)
© IEEE 2017
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or
by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written
permission. Permission can be requested from either ISO or IEEE at the address below or ISO’s member body in the country of
the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
Ch. de Blandonnet 8 • CP 401 3 Park Avenue, New York
CH-1214 Vernier, Geneva, Switzerland NY 10016-5997, USA
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org stds.ipr@ieee.org
www.iso.org www.ieee.org
ii © IEEE 2017 – All rights reserved

ISO/IEEE 11073-10427:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non‐governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE
administers the process and establishes rules to promote fairness in the consensus development process, the
IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the soundness
of any judgments contained in its standards.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject
matter covered by patent rights. By publication of this standard, no position is taken with respect to the
existence or validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying
essential patents or patent claims for which a license may be required, for conducting inquiries into the legal
validity or scope of patents or patent claims or determining whether any licensing terms or conditions
provided in connection with submission of a Letter of Assurance or a Patent Statement and Licensing
Declaration Form, if any, or in any licensing agreements are reasonable or non‐discriminatory. Users of this
standard are expressly advised that determination of the validity of any patent rights, and the risk of
infringement of such rights, is entirely their own responsibility. Further information may be obtained from
ISO or the IEEE Standards Association.
ISO/IEEE 11073‐10427 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073‐10427‐2016). It was adopted by Technical Committee
ISO/TC 215, Health informatics, in parallel with its approval by the ISO member bodies, under the “fast‐track
procedure” defined in the Partner Standards Development Organization cooperation agreement between ISO
and IEEE. IEEE is responsible for the maintenance of this document with participation and input from ISO
member bodies.
© IEEE 2017 – All rights reserved iii

IEEE Std 11073-10427™-2016
Health informatics—Personal health device communication
Part 10427: Device specialization—
Power Status Monitor of
Personal Health Devices
Sponsor
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 22 September 2016
IEEE-SA Standards Board
ISO/IEEE 11073-10427:2018(E)
Abstract: Guidelines for establishing criteria for application, performance, interchangeability, tests,
life cycle costs, and safety requirements of traction power rectifi er transformers are established
in this standard. Set forth are the electrical, mechanical and thermal design, manufacturing, and
testing requirements for traction power rectifi er transformers for dc electrifi cation systems. Covered
in this standard are liquid-immersed and dry-type transformers, including those with cast coil and
epoxy resin encapsulated windings.
Keywords: basic lightning impulse insulation, BIL, commutating impedance, design optimization,
electrical requirements, factory tests, ferroresonance, heavy rail, hot spot, IEEE 1653.1™, light rail,
load cycle, overvoltage transient, partial discharge (PD) service conditions, tests, traction power
duty cycle, traction power rectifi er transformers, transit application
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 3 February 2017. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Offi ce, owned by The Institute of Electrical and Electronics Engineers,
Incorporated.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
PDF: ISBN 978-1-5044-2268-0 STD21081
Print: ISBN 978-1-5044-2269-7 STDPD21081
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
Copyright © 2017 IEEE. All rights reserved.

ISO/IEEE 11073-10427:2018(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE documents are made available for use subject to important notices and legal disclaimers. These notic-
es and disclaimers, or a reference to this page, appear in all standards and may be found under the heading
“Important Notices and Disclaimers Concerning IEEE Standards Documents.” They can also be obtained on
request from IEEE or viewed at http://standards.ieee.org/IPR/disclaimers.html.
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents
IEEE Standards documents (standards, recommended practices, and guides), both full-use and trial-use, are
developed within IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Asso-
ciation (“IEEE-SA”) Standards Board. IEEE (“the Institute”) develops its standards through a consensus de-
velopment process, approved by the American National Standards Institute (“ANSI”), which brings together
volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are doc-
uments developed through scientific, academic, and industry-based technical working groups. Volunteers in
IEEE working groups are not necessarily members of the Institute and participate without compensation from
IEEE. While IEEE administers the process and establishes rules to promote fairness in the consensus develop-
ment process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or
the soundness of any judgments contained in its standards.
IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure
against interference with or from other devices or networks. Implementers and users of IEEE Standards doc-
uments are responsible for determining and complying with all appropriate safety, security, environmental,
health, and interference protection practices and all applicable laws and regulations.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and
e
...