EN 638:1994
(Main)Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties
Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties
This standard specifies a method for determining the short-term tensile properties in the longitudinal direction and, in particular, the tensile stress at yield and/or at maximum load, and elongation at break of thermoplastics pipes and ducts. This European Standard is applicable to all types of thermoplastics pipes, regardless of their intended use.
Kunststoff-Rohrleitungs- und Schutzrohrsysteme - Rohre aus Thermoplasten - Bestimmung der Eigenschaften im Zugversuch
Diese Norm legt ein Verfahren zur Bestimmung der Eigenschaften im Kurzzeit-Zugversuch in Rohrlängsrichtung fest; im einzelnen sind dies: Streckspannung und Spannung bei maximaler Belastung, und Bruchdehnung von Rohren aus Thermoplasten. Diese Norm ist für alle Arten von Rohren aus Thermoplasten anwendbar, unabhängig von deren vorgesehenen Verwendung.
Systèmes de canalisations et de gaines plastiques - Tubes thermoplastiques - Détermination des propriétés en traction
Cette norme spécifie une méthode pour la détermination des propriétés en traction de courte durée dans le sens longitudinal et en particulier: la contrainte au seuil d'écoulement, et/ou à la charge maximale, et l'allongement à la rupture des tubes et gaines thermoplastiques. Cette norme est applicable à tous les types de tubes thermoplastiques, quelle que soit leur application.
Cevni sistemi iz polimernih materialov - Plastomerne cevi - Določanje nateznih lastnosti
General Information
- Status
- Withdrawn
- Publication Date
- 29-Apr-1994
- Withdrawal Date
- 23-Oct-2001
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 24-Oct-2001
- Completion Date
- 24-Oct-2001
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 638:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile properties". This standard covers: This standard specifies a method for determining the short-term tensile properties in the longitudinal direction and, in particular, the tensile stress at yield and/or at maximum load, and elongation at break of thermoplastics pipes and ducts. This European Standard is applicable to all types of thermoplastics pipes, regardless of their intended use.
This standard specifies a method for determining the short-term tensile properties in the longitudinal direction and, in particular, the tensile stress at yield and/or at maximum load, and elongation at break of thermoplastics pipes and ducts. This European Standard is applicable to all types of thermoplastics pipes, regardless of their intended use.
EN 638:1994 is classified under the following ICS (International Classification for Standards) categories: 23.040.20 - Plastics pipes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 638:1994 has the following relationships with other standards: It is inter standard links to EN ISO 6259-1:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 638:1994 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 638:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-1997
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY3ODVWRPHUQHFHYL'RORþDQMHQDWH]QLK
ODVWQRVWL
Plastics piping and ducting systems - Thermoplastics pipes - Determination of tensile
properties
Kunststoff-Rohrleitungs- und Schutzrohrsysteme - Rohre aus Thermoplasten -
Bestimmung der Eigenschaften im Zugversuch
Systemes de canalisations et de gaines plastiques - Tubes thermoplastiques -
Détermination des propriétés en traction
Ta slovenski standard je istoveten z: EN 638:1994
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...