EN 1069-1:2017/FprA1
(Amendment)Water slides - Part 1: Safety requirements and test methods
Water slides - Part 1: Safety requirements and test methods
This European Standard is applicable to all water slides installed in swimming pools of public use.
This Standard specifies general safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible.
These requirements concern safety and the technical rules for design, calculation and testing.
Wasserrutschen - Teil 1: Sicherheitstechnische Anforderungen und Prüfverfahren
Toboggans aquatiques - Partie 1: Exigences de sécurité et méthodes d'essai
Vodni tobogani - 1. del: Varnostne zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1069-1:2017/oprA1:2018
01-julij-2018
Vodni tobogani - 1. del: Varnostne zahteve in preskusne metode
Water slides - Part 1: Safety requirements and test methods
Wasserrutschen - Teil 1: Sicherheitstechnische Anforderungen und Prüfverfahren
Toboggans aquatiques - Partie 1: Exigences de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: EN 1069-1:2017/prA1
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
SIST EN 1069-1:2017/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 1069-1:2017/oprA1:2018
SIST EN 1069-1:2017/oprA1:2018
DRAFT
EUROPEAN STANDARD
EN 1069-1:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2018
ICS 97.220.40
English Version
Water slides - Part 1: Safety requirements and test
methods
Toboggans aquatiques - Partie 1: Exigences de sécurité Wasserrutschen - Teil 1: Sicherheitstechnische
et méthodes d'essai Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.
This draft amendment A1, if approved, will modify the European Standard EN 1069-1:2017. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.