EN 758:1997
(Main)Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification
Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification
This standard specifies requirements for classification of tubular cored electrodes in the as-welded condition for metal arc welding with or without gas shield of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2. One tubular cored electrode can be tested and classified with different gases. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this standard, pulsed current is not used for determining the electrode classification.
Schweißzusätze - Fülldrahtelektroden zum Metall-Lichtbogenschweißen mit und ohne Schutzgas von unlegierten Stählen und Feinkornstählen - Einteilung
Diese Norm legt Anforderungen für die Einteilung von Fülldrahtelektroden im Schweisßustand (des Schweissgutes) für das Lichtbogenschweissen unlegierter und mikrolegierter Stähle mit einer Mindeststreckgrenze bis zu 500 N/mm2 fest. Eine Fülldrahtelektrode kann mit verschiedenen Gasen geprüft und eingeteilt werden. Es ist bekannt, dass die Schweisseigenschaften von Fülldrahtelektroden durch Impulsstrom verändert werden können. Für die Anwendung dieser Norm wird aber der Impulsstrom nicht zur Bestimmung der Elektrodeneinteilung benutzt.
Produits consommables pour le soudage - Fils fourrés pour le soudage à l'arc avec ou sans protection gazeuse des aciers non alliés et à grains fins - Classification
La présente norme spécifie les caractéristiques de classification des électrodes tubulaires fourrées à l'état brut de soudage utilisées pour le soudage à l'arc avec ou sans protection gazeuse des aciers au carbone, au carbone-manganèse et microalliés dont la valeur minimale de limite d'élasticité ne dépasse pas 500 N/mm2. Une électrode tubulaire fourrée peut être essayée et classée avec différents gaz.
Razvrstitev polnjenih žic za obločno varjenje nelegiranih in finozrnatih jekel brez zaščitnega plina in v zaščitnem plinu
General Information
- Status
- Withdrawn
- Publication Date
- 18-Feb-1997
- Withdrawal Date
- 06-May-2008
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/WG 3 - Welding consumables
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-May-2008
- Completion Date
- 07-May-2008
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 758:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification". This standard covers: This standard specifies requirements for classification of tubular cored electrodes in the as-welded condition for metal arc welding with or without gas shield of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2. One tubular cored electrode can be tested and classified with different gases. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this standard, pulsed current is not used for determining the electrode classification.
This standard specifies requirements for classification of tubular cored electrodes in the as-welded condition for metal arc welding with or without gas shield of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2. One tubular cored electrode can be tested and classified with different gases. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this standard, pulsed current is not used for determining the electrode classification.
EN 758:1997 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 758:1997 has the following relationships with other standards: It is inter standard links to EN ISO 17632:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 758:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 758:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...