EN 12094-3:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ortsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen Löschmitteln - Teil 3: Anforderungen und Prüfverfahren für Handauslöseeinrichtungen und StopptasterInstallations fixes de lutte contre l'incendie - Eléments constitutifs pour installations d'extinction a gaz - Partie 3: Exigences et méthodes d'essai pour dispositifs manuels de déclenchement et d'arret d'urgenceFixed firefighting systems - Components for gas extinguishing systems - Part 3: Requirements and test methods for manual triggering and stop devices13.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 12094-3:2003SIST EN 12094-3:2003en01-maj-2003SIST EN 12094-3:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12094-3March 2003ICS 13.220.20English versionFixed firefighting systems - Components for gas extinguishingsystems - Part 3: Requirements and test methods for manualtriggering and stop devicesInstallations fixes de lutte contre l'incendie - Elémentsconstitutifs pour installations d'extinction à gaz - Partie 3:Exigences et méthodes d'essai pour dispositifs manuels dedéclenchement et d'arrêt d'urgenceOrtsfeste Brandbekämpfungsanlagen - Bauteile fürLöschanlagen mit gasförmigen Löschmitteln - Teil 3:Anforderungen und Prüfverfahren fürHandauslöseeinrichtungen und StopptasterThis European Standard was approved by CEN on 7 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12094-3:2003 ESIST EN 12094-3:2003

Clauses of this European Standard addressing the provisions of the EUConstruction Products Directive.18Bibliography.21SIST EN 12094-3:2003

1)Under preparation.SIST EN 12094-3:2003

2)A list with equivalent words in all languages accepted by each CEN member is under preparation.SIST EN 12094-3:2003

5.2.4.4.2.3 StrengthComponents shall not burst, when pressurised to three times the working pressure, as described in 5.2.5.4.2.4 Function and ambient temperaturesThe components shall function, when tested as described in 5.2.6 and 5.2.7.4.2.5 Operational reliabilityThere shall be no deterioration of per
...