EN 13075-2:2009
(Main)Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
This European Standard specifies a method for the determination of the fines mixing time of diluted cationic bituminous emulsions, under standardized conditions.
WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Brechverhaltens - Teil 2: Bestimmung der Mischzeit von Feinanteilen in kationischen Bitumenemulsionen
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Mischzeit von Feinanteilen in gelösten katio¬nischen Bitumenemulsionen unter genormten Bedingungen fest.
WARNUNG - Die Anwendung dieser Norm kann den Umgang mit gefährlichen Substanzen und Aus¬rüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Norm, geeignete Verhaltensregeln für den Arbeits- und Gesundheitsschutz festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitume et liants bitumineux - Détermination du comportement à la rupture - Partie 2 : Détermination da la durée de miscibilité des fines dans les émulsions cationiques de bitume
La présente Norme européenne décrit une méthode de détermination de la durée de miscibilité des fines dans les émulsions cationiques de bitume dans des conditions normalisées. AVERTISSEMENT - L'utilisation de la présente norme européenne implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente norme européenne n'a pas la prétention d'aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje stopnje stabilnosti - 2. del: Določevanje časa mešanja kationskih bitumenskih emulzij
General Information
- Status
- Withdrawn
- Publication Date
- 17-Mar-2009
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336/WG 2 - Emulsions and fluxed bitumens
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 09-Nov-2016
- Completion Date
- 21-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 23-Mar-2009
- Effective Date
- 27-Jun-2012
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Kiwa BDA Testing
Building and construction product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 13075-2:2009 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions". This standard covers: This European Standard specifies a method for the determination of the fines mixing time of diluted cationic bituminous emulsions, under standardized conditions. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for the determination of the fines mixing time of diluted cationic bituminous emulsions, under standardized conditions. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 13075-2:2009 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13075-2:2009 has the following relationships with other standards: It is inter standard links to EN 13075-2:2002, EN 13075-2:2016, EN 58:2012, EN ISO 3696:1995, EN 12594:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13075-2:2009 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13075-2:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen und bitumenhaltige Bindemittel - Bestimmung des Brechverhaltens - Teil 2: Bestimmung der Mischzeit von Feinanteilen in kationischen BitumenemulsionenBitume et liants bitumineux - Détermination du comportement à la rupture - Partie 2 : Détermination da la durée de miscibilité des fines dans les émulsions cationiques de bitumeBitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13075-2:2009SIST EN 13075-2:2009en,fr,de01-julij-2009SIST EN 13075-2:2009SLOVENSKI
STANDARDSIST EN 13075-2:20031DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13075-2March 2009ICS 75.140; 91.100.50Supersedes EN 13075-2:2002
English VersionBitumen and bituminous binders - Determination of breakingbehaviour - Part 2: Determination of fines mixing time of cationicbituminous emulsionsBitume et liants bitumineux - Détermination ducomportement à la rupture - Partie 2 : Détermination da ladurée de miscibilité des fines dans les émulsionscationiques de bitumeBitumen und bitumenhaltige Bindemittel - Bestimmung desBrechverhaltens - Teil 2: Bestimmung der Mischzeit vonFeinanteilen in kationischen BitumenemulsionenThis European Standard was approved by CEN on 10 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13075-2:2009: ESIST EN 13075-2:2009
Characteristics of the Sikaisol filler .7 Bibliography .8
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...