EN 10245-1:2011
(Main)Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
This European Standard specifies the requirements for the characteristics and testing methods for organic coatings made of organic coating material suitable for the application on to steel wire and wire products of circular or other sections.
Other organic materials which are applied intentionally or otherwise such as oils, greases, waxes and temporary finishes which do not become integral or a permanent part of the finished wire product are excluded from this standard
This European Standard is divided in a number of parts, with Part 1 covering the requirements of a general nature and applies to organic coatings and coating material for which no specific requirements have been established in the subsequent parts of prEN 10245.
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Stahldraht - Teil 1: Allgemeine Regeln
Diese Europäische Norm legt die Anforderungen an die Eigenschaften und die Prüfverfahren von organischen Beschichtungen aus organischen Beschichtungsstoffen auf Stahldraht und Drahterzeugnissen mit rundem oder anderem Querschnitt fest.
Andere absichtlich oder unabsichtlich aufgebrachten organischen Beschichtungsstoffe, wie Öle, Fette, Wachse und temporäre Oberflächenausführungen, die keinen dauerhaften, integralen Teil des beschichteten Drahterzeugnisses bilden, sind nicht Gegenstand dieser Norm.
Diese Europäische Norm besteht aus mehreren Teilen, von denen Teil 1 die Anforderungen allgemeiner Art erfasst und für organische Beschichtungen und Beschichtungsstoffe gilt, für die in den nachfolgenden Teilen von EN 10245 keine besonderen Anforderungen festgelegt sind.
Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 1: Principes généraux
Cette norme européenne spécifie les prescriptions en matière de caractéristiques et les méthodes d'essai applicables aux revêtements en matériaux organiques adaptés à l'application sur des fils et produits tréfilés en acier de section circulaire ou autre.
D'autres matériaux organiques appliqués de façon intentionnelle ou non, telles que huiles, graisses, cires, finitions temporaires, ne relèvent pas de la présente norme car ils ne font pas partie intégrante du produit tréfilé fini ou ils n’en font pas partie de manière définitive.
Cette norme européenne se compose de plusieurs parties ; la partie 1 couvre les prescriptions de caractère général et s'applique aux revêtements organiques et aux matériaux de revêtement pour lesquels aucune prescription spécifique n'a été établie dans les autres parties de l'EN 10245.
Jeklena žica in žični izdelki - Organske prevleke na jekleni žici - 1. del: Splošna pravila
Ta evropski standard določa zahteve za karakteristike in preskusne metode za organske prevleke, narejene iz organskega materiala, primernega za nanos na jekleno žico in žične izdelke krožnih ali drugačnih prerezov. Ta standard ne vključuje drugih organskih materialov, nanesenih namenoma ali kako drugače, kot so olja, maziva, voski in začasne apreture, ki ne postanejo integralni ali stalni del končnega žičnega izdelka.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUDYLODStahldraht und Drahterzeugnisse - Organische Beschichtungen auf Draht - Teil 1: Allgemeine RegelnFils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 1: Principes générauxSteel wire and wire products - Organic coatings on steel wire - Part 1: General rules77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10245-1:2011SIST EN 10245-1:2012en,de01-januar-2012SIST EN 10245-1:2012SLOVENSKI
STANDARDSIST EN 10245-1:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10245-1
October 2011 ICS 25.220.60; 77.140.65 Supersedes EN 10245-1:2001English Version
Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
Fils et produits tréfilés en acier - Revêtements organiques sur fils d'acier - Partie 1: Principes généraux
Stahldraht und Drahterzeugnisse - Organische Beschichtungen auf Stahldraht - Teil 1: Allgemeine RegelnThis European Standard was approved by CEN on 17 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10245-1:2011: ESIST EN 10245-1:2012
Part 1: General Rules; Part 2: PVC finished wire; Part 3: PE coated wire; Part 4: Polyester coated wire; Part 5: Polyamide coated wire. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.