Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe

This document is applicable to manually operated end cocks designed to cut-off the brake pipe and the main reservoir pipe of the air brake and compressed air system of rail vehicles; without taking the type of vehicles and track-gauge into consideration.
This document specifies requirements for the design, dimensions, testing and certification (qualification and/or homologation), and marking.

Bahnanwendungen - Gerade und abgewinkelte Luftabsperrhähne für die Hauptluftleitung und Hauptbehälterleitung

Diese Europäische Norm gilt für manuell bediente Luftabsperrhähne an den Enden der Hauptluft  und der Hauptbehälterleitung im Druckluft( brems) system von Eisenbahnfahrzeugen, ohne Berücksichtigung der Bauart der Fahrzeuge und der Spurweite.
Diese Europäische Norm enthält Anforderungen hinsichtlich der Gestaltung, der Abmessungen, der Prüfung und der Zertifizierung (Qualifizierung und/ oder Zulassung) und der Kennzeichnung.

Applications ferroviaires - Robinets d'arrêt droit ou coudé pour conduite générale de frein et conduite principale

La présente Norme européenne est applicable aux robinets d’arrêt manoeuvrables manuellement, conçus pour
interrompre la conduite générale et la conduite principale des systèmes de freinage par air comprimé des véhicules
ferroviaires, sans considération du type des véhicules et de gabarit de la voie.
La présente Norme européenne donne les exigences à respecter pour la conception, les dimensions, les essais
et la certification (qualification et / ou homologation), et le marquage.

Železniške naprave - Ravne in kotne zaporne pipe za zavorne in glavne zračne vode

Ta evropski standard velja za ročno upravljane zavorne pipe, načrtovane za izključitev zavornega in glavnega zračnega voda zračne zavore, in sistema stisnjenega zraka tirnih vozil brez upoštevanja vrste vozil in profila tira. Ta evropski standard določa zahteve za načrtovanje, dimenzije, preskušanje in certificiranje (kvalifikacija in/ali homologacija) ter označevanje.

General Information

Status
Withdrawn
Publication Date
05-Oct-2010
Withdrawal Date
07-Dec-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
08-Dec-2021

Relations

Buy Standard

Standard
EN 14601:2005+A1:2011
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRGHBahnanwendungen - Gerade und abgewinkelte Luftabsperrhähne für die Hauptluftleitung und HauptbehälterleitungApplications ferroviaires - Robinets d'arrêt droit ou coudé pour conduite générale de frein et conduite principaleRailway applications - Straight and angled end cocks for brake pipe and main reservoir pipe45.040Materiali in deli za železniško tehnikoMaterials and components for railway engineeringICS:Ta slovenski standard je istoveten z:EN 14601:2005+A1:2010SIST EN 14601:2005+A1:2011en,fr,de01-april-2011SIST EN 14601:2005+A1:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14601:2005+A1
October 2010 ICS 45.060.01 Supersedes EN 14601:2005English Version
Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe
Applications ferroviaires - Robinets d'arrêt droit ou coudé pour conduite générale de frein et conduite principale
Bahnanwendungen - Gerade und abgewinkelte Luftabsperrhähne für die Hauptluftleitung und Hauptbehälterleitung This European Standard was approved by CEN on 24 March 2005 and includes Amendment 1 approved by CEN on 30 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14601:2005+A1:2010: ESIST EN 14601:2005+A1:2011

Page Foreword . 41Scope. 52Normative references . 53Terms and definitions . 54Requirements . 94.1General . 94.2Operating conditions . 94.3Functional characteristics. 94.3.1General . 94.3.2Open and closed positions . 104.3.3Lubrication . 104.3.4Venting port . 104.3.5Torque . 104.3.6Spindle handle of the end cock . 104.3.7Fall time . 114.3.8Leakage . 114.3.9Vacuum withstanding . 114.3.10Pneumatic shocks . 114.4Constructional characteristics . 114.4.1External appearance . 114.4.2Connections . 114.4.3Space envelope . 114.4.4Mechanical shocks . 114.4.5Resistance to torque . 124.4.6Life expectancy . 125Type test methods . 125.1Sampling for type test . 125.2Test requirements . 125.3Test procedure . 125.3.1Principle . 125.3.2Check of physical and geometrical characteristics . 135.3.3Measurement of the operating torque . 145.3.4Measurement of the pressure fall time . 145.3.5Hydraulic test (water pressure) of the end cock body at given pressure . 165.3.6Operating test under air flow condition . 165.3.7Pneumatic test of the isolating device at given pressures and temperatures . 175.3.8Endurance at ambient temperature with reduced air flow . 185.3.9Measurement of the operating torque drift . 195.3.10Vibration test . 205.3.11Resistance to shock test . 205.3.12Vacuum test . 205.3.13Corrosion test . 215.3.14Resistance to torque: . 225.3.15Examination . 235.4Approval validity . 235.5Type test report . 236Homologation . 236.1General . 236.1.1Procedure . 23SIST EN 14601:2005+A1:2011

Dimensions of end cocks . 26Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)"""" . 30!!!!deleted text"""" Bibliography . 36
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.