iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 639:1994

(Main)

Common requirements for concrete pressure pipes including joints and fittings

Common requirements for concrete pressure pipes including joints and fittings

This European Standard specifies common requirements for the following components : concrete pressure pipes, joints and fittings including jacking pipes. These components are intended to be used in water systems which carry water for human consumption, industrial purposes, irrigation or waste water.

Allgemeine Anforderungen für Druckrohre aus Beton einschließlich Rohrverbindungen und Formstücken

Die vorliegende Norm enthält allgemeine Anforderungen für Betondruckrohre, Rohrverbindungen und Formstücke einschließlich Vortriebsrohren. Die Bauteile sind für Rohrleitungen vorgesehen, durch die Wasser für den menschlichen Verbrauch, für industrielle Zwecke, für Bewässerung sowie Abwässer fließen.

Prescriptions communes pour tuyaux pression en béton y compris joints et pièces spéciales

Cette Norme Européenne spécifie les prescriptions communes pour les composants suivants : tuyaux pression en béton, les joints et les pièces spéciales. Ces composants sont prévus pour être utilisés dans les réseaux d'eau destinés à la consommation humaine, à des fins industrielles, à l'irrigation ou dans les réseaux d'eaux usées.

Splošne zahteve za betonske tlačne cevi, skupaj s spoji in fazonskimi kosi

General Information

Status
Published
Publication Date
30-Oct-1994
Withdrawal Date
29-Apr-1995
ICS
23.040.50 - Pipes and fittings of other materials
Technical Committee
CEN/TC 164 - Water supply
Drafting Committee
CEN/TC 164 - Water supply
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jul-2024
Completion Date
15-Jul-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 639:1996 - Common requirements for concrete pressure pipes including joints and fittings

Buy Standard

EN 639:1996EN 639:1996
PreviousNext
Standard
EN 639:1996
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-1996
6SORãQH]DKWHYH]DEHWRQVNHWODþQHFHYLVNXSDMVVSRMLLQID]RQVNLPLNRVL
Common requirements for concrete pressure pipes including joints and fittings
Allgemeine Anforderungen für Druckrohre aus Beton einschließlich Rohrverbindungen
und Formstücken
Prescriptions communes pour tuyaux pression en béton y compris joints et pieces
spéciales
Ta slovenski standard je istoveten z: EN 639:1994
ICS:
23.040.50 Cevi in fitingi iz drugih Pipes and fittings of other
materialov materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 512:1994/A1:2001(Amendment)
Fibre-cement products - Pressure pipes and joints
SIST EN 512:1996/A1:2001

Migrated from Progress Sheet (TC Comment) (2000-07-10): Under UAP following BT C115/2000
2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1444:2000(Main)
Fibre-cement pipelines - Guide for laying and on-site work practices
SIST EN 1444:2001

This draft European Standard, applies to both types of fibre-cement pipes AT and NT as defined in EN 512:1994, gives installation recommendations for this pipelines in above or below ground situations. It complements the general principles for all types of water supply systems specified in EN 805:2000, "Water supply - Requirements for systems and components outside buildings", and should be used in conjunction with that standard. This standard gives guidance in on-site working methods and in the selection and use of approved tools for cutting and machining fibre-cement pipes. This standard does not cover the following : a) installation by thrust boring and pipe jacking methods which require the use of highly specialized techniques ; b) problems caused by the use of special installations procedures (e.g. removal of pile sheeting in very deep trenches, etc.).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 642:1994(Main)
Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirements for prestressing steel for pipes
SIST EN 642:1996

This standard covers the requirements and the manufacture of prestressed concrete cylinder pressure pipes and fittings in sizes from DN/ID 500 to DN/ID 4000 inclusive. Larger sizes could be manufactured based on the concepts of thisstandard. These types of pipes are designed for the internal pressure, external loads and bedding conditions designated by the purchaser.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 641:1994(Main)
Reinforced concrete pressure pipes, cylinder type, including joints and fittings
SIST EN 641:1996

This European Standard specifies the requirements and manufacture of reinforced concrete pressure pipe cylinder type, that is not prestressed, in sizes from DN/ID 250 to DN/ID 4000 inclusive. Pretensioned concrete cylinder pipe, in whichthe reinforcement is wrapped, under low tension, directly on to the steel cylinder is covered by this standard and is not normally manufactured in sizes above DN/ID 1400. Larger sizes can be manufactured based on the concepts of thisstandard.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 512:1994(Main)
Fibre-cement products - Pressure pipes and joints
SIST EN 512:1996

This standard specifies the characteristics of fibre-cement pipes and joints for use under pressure for conveying potable and non potable water and sewage. It is concerned with composition, classification, geometrical, mechanical and physical characteristics, acceptance tests and type tests.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-1:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
SIST EN 295-1:2013

This European Standard specifies requirements for vitrified clay pipes, fittings and flexible joints for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
This standard also specifies requirements for rubber, polyurethane and polypropylene materials and other components used for jointing clay pipes and fittings.
This standard specifies different strength classes, systems of joint dimensions, lengths and fittings.
NOTE 1   The specifiers/purchasers can select them according to their requirements.
This standard does not apply to special fittings, adaptors and compatible accessories, perforated pipes and fittings, manholes and inspection chambers and pipes and joints for pipe jacking, which are specified in other parts of the standard series EN 295.
NOTE 2   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-6:2013(Main)
Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers
SIST EN 295-6:2013

This European Standard applies for components for vitrified clay manholes and inspection chambers for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
It specifies different strength classes and heights of sections. It also specifies the requirements for components used for joints, systems of joint dimensions and the materials rubber, polyurethane and polypropylene used for joints.
NOTE 1   The specifiers/purchasers can select the components for vitrified clay manholes and inspection chambers according to their requirements.
This standard does not apply to manhole tops and cover slabs.
NOTE 2   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-5:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
SIST EN 295-5:2013

This European Standard specifies requirements for perforated pipes and compatible fittings made from vitrified clay with or without sockets for use in land drains and drainage of waste tips. They are also used for percolation into the ground.
This standard specifies different strength classes and areas of perforations.
NOTE 1   The specifiers/purchasers can select perforated pipes and compatible fittings according to their requirements.
NOTE 2   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-4:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
SIST EN 295-4:2013

This European Standard specifies requirements for adaptors and connectors made from vitrified clay and/or other suitable materials for use with vitrified clay pipes and fittings for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
Adaptors and connectors include insertable fittings, sealing rings for cut pipes and heat-shrinkable sleeves.
This standard also applies for metal banded flexible couplings and adaptors and specifies requirements for rubber, polyurethane, stainless steel and other components used for them.
NOTE 1   The specifiers/purchasers can select adaptors, connectors and flexible couplings according to their requirements.
NOTE 2   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295 2 and EN 295 3, respectively.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 295-7:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
SIST EN 295-7:2013

This European Standard specifies requirements for vitrified clay pipes and joints for pipe jacking for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure. Pipe jacking techniques include micro-tunnelling, pipe-eating, pipe bursting and where appropriate lining with discrete pipes.
This standard also specifies requirements for rubber, polyurethane, polypropylene, stainless steel and other materials used for joints for pipe jacking.
NOTE   Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day