EN ISO 4126-2:2003/AC:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)RþQLPLDispositifs de sécurité pour la protection contre les pressions excessives - Partie 2: Dispositifs de sureté a disque de rupture (ISO 4126-2:2003)Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 2: Berstscheibeneinrichtungen (ISO 4126-2:2003)Ta slovenski standard je istoveten z:EN ISO 4126-2:2003/AC:2006SIST EN ISO 4126-2:2003/AC:2007en,fr,de13.240Varstvo pred previsokim tlakomProtection against excessive pressureICS:SLOVENSKI
STANDARDSIST EN ISO 4126-2:2003/AC:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 4126-2:2003/ACJuly 2006Juillet 2006Juli 2006ICS 13.240English versionVersion FrançaiseDeutsche FassungSafety devices for protection against excessive pressure - Part 2: Burstingdisc safety devices (ISO 4126-2:2003)Dispositifs de sécurité pour la protectioncontre les pressions excessives - Partie 2:Dispositifs de sûreté à disque de rupture(ISO 4126-2:2003)Sicherheitseinrichtungen gegenunzulässigen Überdruck - Teil 2:Berstscheibeneinrichtungen (ISO 4126-2:2003)This corrigendum becomes effective on 12 July 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 12 juillet 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 12.Juli 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN ISO 4126-2:2003/AC:2006 D/E/F

Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC (PED) This European Standard has been prepared under a mandate given to CEN by the European Commission to provide a means of conforming to Essential Requirements of the New Approach Directive 97/23/EC (PED). Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 — Correspondence between this European Standard and Directive 97/23/EC (PED) Essential Requirements of Directive 97/23/EC (PED) Sub-clauses of this EN Essential Requirements Annex I of PED 11 Protection against misuse 1.3 4, 4 to 10, 12 and 16 General design 2.1 6.1 Design for adequate strength 2.2 6.1.2 Safe operation 2.3 4.3 Corrosion 2.6 11 Assemblies 2.8 13 and 14 Final assessment 3.2 17 Marking and labelling 3.3 4.2, 4.3 and annex A Materia
...