prEN 2267-002

SLOVENSKI STANDARD
oSIST prEN 2267-002:2024
01-junij-2024
Aeronavtika - Električni kabli za splošno uporabo - Delovne temperature med –55
°C in 260 °C - 002. del: Splošno
Aerospace series - Cables, electrical, for general purpose - Operating temperatures
between - 55 °C and 260 °C - Part 002: General
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung -
Betriebstemperaturen zwischen -55 °C und 260 °C - Teil 002: Allgemeines
Série aérospatiale - Câbles, électriques, d'usage général - Températures de
fonctionnement comprises entre -55 °C et 260 °C - Partie 002: Généralités
Ta slovenski standard je istoveten z: prEN 2267-002
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 2267-002:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2267-002:2024

---------------------- Page: 2 ----------------------
oSIST prEN 2267-002:2024


DRAFT
EUROPEAN STANDARD
prEN 2267-002
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2024
ICS 49.060 Will supersede EN 2267-002:2015
English Version

Aerospace series - Cables, electrical, for general purpose -
Operating temperatures between - 55 °C and 260 °C - Part
002: General
Série aérospatiale - Câbles, électriques, d'usage Luft- und Raumfahrt - Leitungen, elektrisch, für
général - Températures de fonctionnement comprises allgemeine Verwendung - Betriebstemperaturen
entre -55 °C et 260 °C - Partie 002: Généralités zwischen -55 °C und 260 °C - Teil 002: Allgemeines
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2267-002:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 2267-002:2024
prEN 2267-002:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions and symbols . 5
4 List of product standards . 5
5 Materials and construction . 6
5.1 Materials . 6
5.2 Construction . 6
5.2.1 Number of cores .
...