EN ISO 15877-5:2009/A1:2010
(Amendment)Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15877-5:2009/AMD 1:2010)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15877-5:2009/AMD 1:2010)
2009-04-02 EMA: VA information and track changed from ISO Lead to CEN Lead after ISO notification (see e-mail sent on 2009-04-01).
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung 1 (ISO 15877-5:2009/AMD 1:2010)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 15877-5:2009/AMD 1:2010)
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Klorirani polivinilklorid (PVC-C) - 5. del: Ustrezanje zahtevam za uporabnost sistema - Dopolnilo 1 (ISO 15877-5:2009/AMD 1:2010)
Ta del ISO 15877 določa značilnosti fitingov iz kloriranega polivinilklorida (PVC-C) za cevne sisteme, namenjene uporabi za napeljave z vročo in hladno vodo v stavbah za prenos pitne ali nepitne vode (domači sistemi) in za grelne sisteme pod računskimi tlaki in pri temperaturah v skladu z razredom uporabe (glej preglednico 1 iz ISO 15877-1:2009). Ta del ISO 15877 zajema razpon pogojev delovanja (razrede uporabe) in razrede računskega tlaka. Za vrednosti TD, Tmax in Tmal, ki so višje od tistih v preglednici 1 iz ISO 15877-1:2009, ta del ISO 15877 ne velja. Prav tako določa preskusne parametre za preskusne metode, navedene v tem delu ISO 15877. Skupaj z drugimi deli ISO 15877 velja za PVC-C pipe, fitinge, njihove spoje in spoje s komponentami iz drugih polimernih materialov in materialov, ki niso polimerni, namenjeni uporabi za napeljave z vročo in hladno vodo.
General Information
Relations
Overview
EN ISO 15877-5:2009/A1:2010 is a critical European standard amendment addressing plastics piping systems made from chlorinated poly(vinyl chloride) (PVC-C) used in hot and cold water installations. This amendment, prepared under the collaboration of CEN and ISO technical committees, updates fitness-for-purpose criteria specific to PVC-C systems. It incorporates new classifications and test pressures tailored for the long-term reliability and safety of PVC-C piping used particularly in low-temperature heating applications.
The standard ensures that piping systems meet stringent performance requirements for durability, pressure resistance, and temperature tolerances, essential for residential, commercial, and industrial water supply networks.
Key Topics
- PVC-C Piping Systems: Focuses on chlorinated poly(vinyl chloride), a durable plastic material suitable for hot and cold water conveyance.
- Fitness for Purpose: Defines system performance parameters including pressure ratings, temperature limits, and mechanical joint testing.
- Service Conditions Classification: Introduces Class 4 piping as per ISO 10508, expanding usage to countries employing low-temperature heating with design pressures of 4 bar and 6 bar.
- Hydrostatic Test Pressures: Specifies revised test pressures for solvent cement joints and mechanical joints considering different pressure classes and temperatures.
- Test Duration and Stress Levels: Standardizes testing over 3000 hours under defined hydrostatic stresses, ensuring long-term integrity.
- Amendment Compliance: Mandates national standards bodies in Europe to incorporate this amendment to maintain harmonized system safety and performance.
Applications
- Hot and Cold Water Installations: Applies to plumbing systems in residential, commercial, and industrial buildings requiring reliable water supply under varying temperature and pressure conditions.
- Low-temperature Heating Systems: Supports PVC-C piping usage in heating circuits with operating pressures up to 6 bar and temperatures up to 70°C, enhancing system design flexibility.
- New Installations and Renovations: Guides engineers, designers, and contractors on PVC-C piping specifications for both new construction and upgrading existing systems to comply with European and international standards.
- Quality Assurance and Testing: Provides benchmarks for manufacturers to certify piping components through hydrostatic and mechanical joint testing ensuring system robustness.
Related Standards
- ISO 15877 Series: The broader series of standards covering specifications, classification, and testing methods for PVC-C piping systems.
- ISO 10508: Defines classifications for piping systems used in building services, referenced for pressure and temperature class definitions.
- EN ISO 15877-1 to EN ISO 15877-4: Cover general requirements, specific material properties, and test methods complementing Part 5’s focus on fitness-for-purpose.
- CEN/CENELEC Regulations: Framework ensuring consistent adoption and application of European standards across member countries.
Keywords: PVC-C piping systems, plastics piping standards, EN ISO 15877-5, hot water installations, cold water piping, chlorinated polyvinyl chloride, fitness for purpose, low-temperature heating, hydrostatic test pressure, European piping standards, mechanical joint testing, water supply piping, plastic pipe certification.
Frequently Asked Questions
EN ISO 15877-5:2009/A1:2010 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15877-5:2009/AMD 1:2010)". This standard covers: 2009-04-02 EMA: VA information and track changed from ISO Lead to CEN Lead after ISO notification (see e-mail sent on 2009-04-01).
2009-04-02 EMA: VA information and track changed from ISO Lead to CEN Lead after ISO notification (see e-mail sent on 2009-04-01).
EN ISO 15877-5:2009/A1:2010 is classified under the following ICS (International Classification for Standards) categories: 23.040.01 - Pipeline components and pipelines in general; 23.040.20 - Plastics pipes; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15877-5:2009/A1:2010 has the following relationships with other standards: It is inter standard links to EN ISO 15877-5:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15877-5:2009/A1:2010 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 15877-5:2009/A1:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2011
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG 39&& GHO 8VWUH]DQMH]DKWHYDP]DXSRUDEQRVW
VLVWHPD'RSROQLOR ,62 $0'
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15877
-5:2009/AMD 1:2010)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 5: Gebrauchstauglichkeit des Systems (ISO 15877-
5:2009/AMD 1:2010)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du système -
Amendement 1 (ISO 15877-5:2009/AMD 1:2010)
Ta slovenski standard je istoveten z: EN ISO 15877-5:2009/A1:2010
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 15877-5:2009/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 91.140.60; 23.040.20
English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for
purpose of the system - Amendment 1 (ISO 15877-5:2009/AMD
1:2010)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de
Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 5: Aptitude à l'emploi du C) - Teil 5: Gebrauchstauglichkeit des Systems - Änderung
système - Amendement 1 (ISO 15877-5:2009/AMD 1:2010) 1 (ISO 15877-5:2009/AMD 1:2010)
This amendment A1 modifies the European Standard EN ISO 15877-5:2009; it was approved by CEN on 31 October 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-5:2009/A1:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 15877-5:2009/A1:2010) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems” the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”.
This Amendment to the European Standard EN ISO 15877-5:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and
conflicting national standards shall be withdrawn at the latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
INTERNATIONAL ISO
STANDARD 15877-5
Second edition
2009-03-15
AMENDMENT 1
2010-11-01
Plastics piping systems for hot and cold
water installations — Chlorinated
poly(vinyl chloride) (PVC-C) —
Part 5:
Fitness for purpose of the system
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Poly(chlorure de vinyle) chloré (PVC-C) —
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...