EN 12697-10:2001
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability
Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability
This European Standard describes three test methods for characterising the compactability of a bituminous mix, by the relation between its density or void content and the compaction energy applied to it, using an impact (Marshall) compactor, gyratory compactor, or a vibratory compactor.
This European Standard applies to hot bituminous mixtures (both those prepared in laboratory and those resulting sampled from plant produced mixtures), with D not larger than 31,5 mm in accordance with prEN 13043 for the impact and gyratory compactors, and 40 mm for the vibratory compactor. The results of the test method serve to supplement the results of mixture design.
Asphalt - Prüfverfahren für Heißasphalt - Teil 10: Verdichtbarkeit
Diese Europäische Norm beschreibt drei Prüfverfahren zur Bestimmung der Verdichtbarkeit von Asphalten durch das Verhältnis zwischen ihrer Dichte oder ihren Hohlraumgehalten und der aufgewandten Verdichtungsarbeit unter Verwendung des Einstampfverfahrens (Marshall), Gyrator-Verdichters oder Vibrationsverdichters.
Diese Europäische Norm ist in Übereinstimmung mit prEN 13043 für das Einstampf- oder Gyrator-Verfahren auf Asphalte mit einem maximalen Größtkorn D von 31,5 mm anwendbar, die sowohl im Labor als auch an der Asphaltmischanlage hergestellt sein können. Mit dem Prüfverfahren der Vibrationsverdichtung können Korngrößen bis 40 mm geprüft werden. Die Prüfergebnisse dienen zur Ergänzung der Eignungsprüfung.
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 10: Compactabilité
La présente Norme européenne décrit trois méthodes permettant de caractériser la compactabilité d'un enrobé par la relation entre sa masse volumique apparente ou son pourcentage de vides et l'énergie de compactage qui lui est appliquée à l'aide de machines de compactage par damage (Marshall), de presses à cisaillement giratoires ou de compacteurs vibrants.
La présente Norme européenne est applicable aux mélanges bitumineux à chaud confectionnés en laboratoire ou prélevés sur des mélanges produits en centrales dont la taille D, selon l'EN 13043, n'est pas supérieure à 31,5 mm pour le compactage par damage et les presses à cisaillement giratoires, et à 40 mm pour les compacteurs vibrants. Les résultats de la méthode d'essai servent à compléter les résultats de l'épreuve de formulation.
Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Test methods for hot mix asphalt - Part 10: CompactabilityAsphalt - Prüfverfahren für Heißasphalt - Teil 10: VerdichtbarkeitMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 10: CompactabilitéBituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-10:2001SIST EN 12697-10:2002en01-september-2002SIST EN 12697-10:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-10November 2001ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part10: CompactabilityMélanges bitumineux - Méthodes d'essai pour mélangehydrocarboné à chaud - Partie 10: CompactabilitéAsphalt - Prüfverfahren für Heißasphalt - Teil 10:VerdichtbarkeitThis European Standard was approved by CEN on 14 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-10:2001 ESIST EN 12697-10:2002
Test methods for hot mix asphalt
Part 5: Determination of the maximumdensity.prEN 12697-6, Bituminous mixtures
Test methods for hot mix asphalt
Part 6: Determination of bulk density ofbituminous specimen by hydro-static method.prEN 12697-8, Bituminous mixtures
Test methods for hot mix asphalt
Part 8: Determination of the air voidscontent of bituminous materials.prEN 12697-30, Bituminous mixtures
Test methods for hot mix asphalt
Part 30: Specimen preparation, impactcompactor.prEN 12697-31:2000, Bituminous mixtures
Test methods for hot mix asphalt
Part 31: Specimen preparation,gyratory compactor.prEN 12697-32, Bituminous mixtures
Test methods for hot mix asphalt
Part 32: Laboratory compaction ofbituminous mixtures by a vibratory compactor.prEN 13043, Aggregates for bituminous mixtures and surface treatments for roads, airfields and other traffickedareas.ISO 5725, Accuracy (trueness and precision) of measurement methods and results.3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply.3.1soluble binderpercentage by mass of extractable binder in an anhydrous sample determined by extracting the binder from thesampleNOTEExtraction may be followed by binder recovery.3.2insoluble binder contentpercentage by mass of binder that adheres to the aggregate particles after extraction3.3precisioncloseness of agreement between independent test results obtained under stipulated conditionsSIST EN 12697-10:2002
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.