iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14067-6:2018/FprA1

(Amendment)

Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment

Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment

This document gives guidelines for the cross wind assessment of railways.
This document is applicable to all passenger vehicles, locomotives and power cars (with a maximum train speed above 140 km/h up to 360 km/h) and freight wagons (with a maximum train speed above 80 km/h up to 160 km/h) and track gauges from 1 435 mm to 1 668 mm inclusive. For passenger vehicles, locomotives and power cars with a maximum train speed between 250 km/h and 360 km/h, a requirement to demonstrate the cross wind stability is imposed. This document is not applicable to light rail and urban rail vehicles.

Bahnanwendungen - Aerodynamik - Teil 6: Anforderungen und Prüfverfahren zur Bewertung von Seitenwind

Applications ferroviaires - Aérodynamique - Partie 6 : Exigences et procédures d'essai pour l'évaluation de la stabilité vis-à-vis des vents traversiers

Železniške naprave - Aerodinamika - 6. del: Zahteve in preskusni postopki za oceno vpliva bočnega vetra - Dopolnilo A1

General Information

Status
Not Published
Publication Date
03-Oct-2022
Withdrawal Date
03-Jan-2023
ICS
45.060.01 - Railway rolling stock in general
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 6 - Aerodynamics
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
05-May-2022
Completion Date
05-May-2022
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
SIST EN 14067-6:2018/kFprA1:2022 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment

Relations

Merged Into
EN 14067-6:2018+A1:2022 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
Effective Date
18-Jan-2023
Amends
EN 14067-6:2018 - Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment
Effective Date
11-May-2020

Buy Standard

EN 14067-6:2018/oprA1:2020EN 14067-6:2018/oprA1:2020
PreviousNext
Draft
EN 14067-6:2018/oprA1:2020
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN 14067-6:2018/oprA1:2020
01-oktober-2020
Železniške naprave - Aerodinamika - 6. del: Zahteve in preskusni postopki za
oceno vpliva bočnega vetra - Dopolnilo A1
Railway applications - Aerodynamics - Part 6: Requirements and test procedures for
cross wind assessment
Bahnanwendungen - Aerodynamik - Teil 6: Anforderungen und Prüfverfahren zur
Bewertung von Seitenwind
Applications ferroviaires - Aérodynamique - Partie 6 : Exigences et procédures d'essai
pour l'évaluation de la stabilité vis-à-vis des vents traversiers
Ta slovenski standard je istoveten z: EN 14067-6:2018/prA1:2020
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 14067-6:2018/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 14067-6:2018/oprA1:2020

SIST EN 14067-6:2018/oprA1:2020

DRAFT
EUROPEAN STANDARD
EN 14067-6:2018
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2020
ICS 45.060.01
English Version
Railway applications - Aerodynamics - Part 6:
Requirements and test procedures for cross wind
assessment
Applications ferroviaires - Aérodynamique - Partie 6 : Bahnanwendungen - Aerodynamik - Teil 6:
Exigences et procédures d'essai pour l'évaluation de la Anforderungen und Prüfverfahren zur Bewertung von
stabilité vis-à-vis des vents traversiers Seitenwind
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 14067-6:2018. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14067-6:2018/prA1:2020:2020 E
worldwide for CEN national Members.

SIST EN 14067-6:2018/oprA1:2020
EN 14067-6.2018/prA1:2020 (E)
Contents Page
European foreword . 3
1 Modifications to Annex H, H.3.3 Example Ve
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15227:2020+A1:2024(Main + Amendment)
Railway applications - Crashworthiness requirements for rail vehicles
SIST EN 15227:2020+A1:2024

This document specifies crashworthiness requirements applicable to new designs of:
- locomotives;
- driving vehicles operating in passenger and freight trains;
- passenger rail vehicles operating in passenger trains (such as trams, metros, mainline trains).
This document identifies common methods of providing passive safety that can be adapted to suit individual vehicle requirements.
This document specifies the characteristics of reference obstacle models for use with the design collision scenarios.
This document also specifies the requirements and methods for demonstrating that the passive safety objectives have been achieved by comparison with existing proven designs, numerical simulation, component or full-size tests, or a combination of all these methods.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17149-1:2024(Main)
Railway applications - Strength assessment of rail vehicle structures - Part 1: General
SIST EN 17149-1:2024

This document supports the other standards in the EN 17149 series, in order to ensure consistency of terminology across the series. It describes the basic terms and definitions as well as general procedures for strength assessments of rail vehicle structures that are manufactured, operated and maintained in accordance with standards valid for rail system applications.
This document is applicable to all kinds of rail vehicles.
The assessment procedure is restricted to ferrous materials and aluminium.
This document does not define design load cases.
This document is not applicable for corrosive conditions or elevated temperature operation in the creep range.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17149-2:2024(Main)
Railway applications - Strength assessment of rail vehicle structures - Part 2: Static strength assessment
SIST EN 17149-2:2024

This document specifies a procedure for static strength assessment of rail vehicle structures.
It is part of a series of standards that specifies procedures for strength assessments of structures of rail vehicles that are manufactured, operated and maintained according to standards valid for railway applications.
The assessment procedure of the series is restricted to ferrous materials and aluminium.
This document series does not define design load cases.
This document series is not applicable for corrosive conditions or elevated temperature operation in the creep range.
This series of standards is applicable to all kinds of rail vehicles. However, it does not define in which cases or for which kinds of rail vehicles a static strength assessment is to be undertaken.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14067-4:2024(Main)
Railway applications - Aerodynamics - Part 4: Requirements and assessment procedures for aerodynamics on open track
SIST EN 14067-4:2024

This document establishes requirements, test procedures, assessment methods and acceptance criteria for operating rolling stock in open track. For pressure variations and slipstream effects beside the track, requirements and assessment methods are provided. For running resistance, assessment methods are addressed in this document. Load cases on infrastructure components due to train-induced pressure variations and slipstream effects are addressed in this document. For ballasted track test set-ups for ballast projection assessment are proposed.
The requirements only apply to rolling stock of the heavy rail system with maximum train speeds above 160 km/h and not to other rail systems. The document is applicable to all rolling stock and infrastructure in open air with nominal track gauges of 1 435 mm to 1 668 mm inclusive.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 45545-3:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
SIST EN 45545-3:2024

This document specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles.
The objective of the measures and requirements, specified in this document, is to protect passengers and staff in railway vehicles in the event of a developing fire on board.
Use of a Fire Containment and Control System, where permitted as an alternative to a fire barrier, is not in the scope of this document. It is not within the scope of this document to describe measures that ensure the preservation of the railway vehicles in the event of a fire.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 45545-4:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design
SIST EN 45545-4:2024

This document specifies fire safety requirements for railway vehicle design to cover the objectives specified in EN 45545-1:2013.
The measures and requirements specified in this document aim to protect passengers and staff in railway vehicles in the event of a fire on board by minimizing the risk of a fire starting, delaying the fire development and controlling the spread of fire products through the railway vehicle, thus aiding evacuation.
It is not within the scope of this document to describe measures which ensure the preservation of the railway vehicles in the event of a fire.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15085-2:2020+A1:2023(Main + Amendment)
Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
SIST EN 15085-2:2020+A1:2024

This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    27 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 45545-2:2020+A1:2023(Main + Amendment)
Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
SIST EN 45545-2:2020+A1:2023

This part of EN 45545 specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1.
The operation and design categories defined in EN 45545-1 are used to establish hazard levels that are used as the basis of a classification system.
For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.
It is not within the scope of this European Standard to describe measures that ensure the preservation of the vehicles in the event of a fire.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17343:2023(Main)
Railway applications - General terms and definitions
SIST EN 17343:2023

This document provides terms and definitions for rail networks and rail vehicles guided by track and wheels, both made of steel and/or other materials.
This includes heavy rail and urban rail systems.
This document is applicable as a reference for future European Standards and the revision of existing standards and represents a set of general technical terms and definitions.
This document does not apply to specific applications such as:
-   track construction and maintenance machines not travelling on rails;
-   road-rail machines when not travelling on rails;
-   magnetic levitation transport networks and vehicles;
-   guided busways and guided busses;
-   non-public rail networks and vehicles, e.g. mine rail systems;
-   rail networks and vehicles exclusively for leisure, historical and tourist purposes, e.g. mountain-, field-, park-, cable rail systems, funiculars and theme park rides;
-   trolley busses.
Not in the scope are terms and definitions related to:
-   control command and signalling,
-   operation,
-   geographical aspects.

  • Standard
    76 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19659-1:2023(Main)
Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 1: Terms and definitions (ISO 19659-1:2017)
SIST EN ISO 19659-1:2023

ISO 19659-1:2017 is applicable to rail vehicles and specifies the terms, definitions, symbols and abbreviated terms to be used in the ISO 19659 series, heating, ventilation and air conditioning for rolling stock.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day