EN 14910:2007+A1:2009
(Main)Garden equipment - Walk-behind combustion engine powered trimmers - Safety
Garden equipment - Walk-behind combustion engine powered trimmers - Safety
This European Standard deals with all significant hazards, hazardous situations and events relevant to walk-behind trimmers, powered by a combustion engine, with cutting means using non-metallic filament line or freely pivoting non-metallic cutter(s), of which the cutting elements rely on centrifugal force to achieve cutting with the kinetic energy of a single cutting element not exceeding 10 J, designed for cutting grass or similar plant material, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard is not applicable to:
a) walk-behind trimmers with cutting means other than those described above;
b) self propelled walk-behind trimmers or walk-behind edge trimmers;
c) lawnmowers using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy;
NOTE 1 EN 836 applies for machines using non-metallic filament line or freely pivoting non-metallic cutting elements with greater than 10 J kinetic energy.
d) motor mowers using metal or other solid cutting elements.
NOTE 2 EN 12733 applies for machines using metal or other solid cutting elements.
EMC and environmental hazards other than noise have not been considered in this European Standard.
This European Standard is not applicable to walk-behind trimmers which are manufactured before the date of its publication as EN.
NOTE 3 Lawn trimmers and lawn edge trimmers (electric powered) are dealt with in EN 786, grass trimmers (internal combustion engine powered) are dealt with in EN 11806 and lawn mowers (internal combustion engine powered) are dealt with in EN 836.
Gartengeräte - Handgeführte Trimmer mit Verbrennungsmotor - Sicherheit
Matériel de jardinage - Coupe-gazon à moteur à combustion interne et à conducteur à pied - Sécurité
Oprema za nego vrta - Ročno vodljivi obrezovalniki za trato, gnani z motorjem z notranjim zgorevanjem - Varnost
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gartengeräte - Handgeführte Trimmer mit Verbrennungsmotor - SicherheitMatériel de jardinage - Coupe-gazon à moteur à combustion interne et à conducteur à pied - SécuritéGarden equipment - Walk-behind combustion engine powered trimmers - Safety65.060.70Vrtnarska opremaHorticultural equipmentICS:Ta slovenski standard je istoveten z:EN 14910:2007+A1:2009SIST EN 14910:2007+A1:2009en01-junij-2009SIST EN 14910:2007+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14910:2007+A1
April 2009 ICS 65.060.70 Supersedes EN 14910:2007English Version
Garden equipment - Walk-behind combustion engine powered trimmers - Safety
Matériel de jardinage - Coupe-gazon à moteur à combustion interne et à conducteur à pied - Sécurité
Gartengeräte - Handgeführte Trimmer mit Verbrennungsmotor - Sicherheit This European Standard was approved by CEN on 22 March 2007 and includes Amendment 1 approved by CEN on 14 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14910:2007+A1:2009: ESIST EN 14910:2007+A1:2009
Vibration (see 5.10) . 28SIST EN 14910:2007+A1:2009
Noise test code — Engineering method (grade 2) (see 5.11) . 32B.1 General . 32B.2 Scope. 32B.3 Sound power level determination . 32B.4 A-weighted emission sound pressure level determination . 34B.5 Requirements for test floor . 34B.5.1 Artificial surface . 34B.5.2 Natural grass . 35B.6 Installation, mounting and operating conditions . 35B.7 Information to be recorded and reported . 36B.8 Measurement uncertainties and declaration of noise emission values . 36Annex C (informative)
Example of a material and construction fulfilling the requirements for an artificial surface as required by B.5.1 . 37C.1 Material . 37C.2 Construction . 37Annex D (normative)
Calculation of kinetic energy (see 5.12.1) . 39Annex E (normative)
Safety signs for use on trimmers (see 6.2.2) . 40Annex F (informative)
Safety instructions . 43F.1 Introduction . 43F.2 General provisions . 43F.3 Safe operating practices . 43F.3.1 Training . 43F.3.2 Preparation . 43F.3.3 Operation .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.