EN 3660-065:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 065: Endgehäuse, Bauform K, 90°, für wärmeschrumpfende Bauteile, Schirmanschluss, abgedichtet, selbstsichernd - ProduktnormSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 065: Raccord type K, coudé 90°, blindé, étanche, pour manchon thermorétractable, auto-freiné - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 065 : Cable outlet, style K, 90°, for heat shrinkable boot, shielded, sealed, self locking - Product standard49.060Aerospace electric equipment and systems31.220.99Druge elektromehanske komponenteOther electromechanical componentsICS:Ta slovenski standard je istoveten z:EN 3660-065:2016SIST EN 3660-065:2016en,fr,de01-marec-2016SIST EN 3660-065:2016SLOVENSKI
STANDARDSIST EN 3660-065:20101DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-065
January
t r s x ICS
v {ä r x r Supersedes EN
u x x ræ r x wã t r r {English Version
Aerospace series æ Cable outlet accessories for circular and rectangular electrical and optical connectors æ Part
r x w ã Cable outletá style Ká
{ r ¹á for heat shrinkable bootá shieldedá sealedá self locking æ Product standard Série aérospatiale æ Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques æ Partie
r x w ã Raccord type Ká coudé
{ r ¹á blindéá étancheá pour manchon thermorétractableá autoæfreiné pour EN
t { { y æ Norme de produit
Luftæ und Raumfahrt æ Endgehäuse für elektrische und optische Rundæ und Rechtecksteckverbinder æ Teil
r x wã Endgehäuseá Bauform Ká
{ r ¹á für wärmeschrumpfende Bauteileá Schirmanschlussá abgedichtetá selbstsichernd æ Produktnorm This European Standard was approved by CEN on
z June
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u x x ræ r x wã t r s x ESIST EN 3660-065:2016

EN 2591- 1), Aerospace series — Elements of electrical and optical connection — Test methods EN 2997 (all parts), Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak
EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards
EN 3660-033, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets — Product standard 2) AS85049A, Connector accessories, electrical general specification for- 3) IEC 60529, Degrees of protection provided by enclosures (IP Code)
DIN 82, Knurling 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. (Self-locking / anti rotational definition) A self-locking or anti rotational mechanism provides a nut rotation with moderate torque in the mated direction and provides a greater torque in the unmated direction. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1 to Table 4. For cable entry dimensions, see 4.2. All dimensions are in millimetres.
1) All its parts quoted in this European Standard. 2) In preparation at the date of publication of this European Standard. 3) Published by: SAE National (US) Society of Automotive Engineers http://www.sae.org/ SIST EN 3660-065:2016

Key 1 Thread C 2 Marking 3 Number of teeth N 4 Four tooling holes spaced 90° apart. Ø 2,60, depth ,1,27 5 Straight knurl. Pitch manufacturer’s option. 6 RKV 08 DIN 82. Figure 2. (Please note there may be crossover dependent on diameter and pitch) 7 Clearance on thread C 8 Break edge
NOTE 1 Cable outlets may be manufactured as cast, fabricated or machined (manufactures option) NOTE 2 No sharp edges / burrs permissible on internal or external surfaces / joints. Surface finish of
on all internal surfaces NOTE 3 Valley of start of tooth to be at vertical centre line of accessory at position shown: – within ± 3° for shell sizes 08-12; – within ± 2° for shell sizes 14-18; – within ± 1° for shell sizes 20 and larger. Figure 1
1,6 µm max. SIST EN 3660-065:2016
...