FprEN 13707

SLOVENSKI STANDARD
oSIST prEN 13707:2017
01-julij-2017
+LGURL]RODFLMVNLWUDNRYL2MDþHQLELWXPHQVNLWUDNRYL]DWHVQMHQMHVWUHK'HILQLFLMH
LQODVWQRVWL
Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing -
Definitions and characteristics
Abdichtungsbahnen - Bitumenbahnen mit Trägereinlage für Dachabdichtungen -
Definitionen und Eigenschaften
Ta slovenski standard je istoveten z: prEN 13707
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN 13707:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 13707:2017
oSIST prEN 13707:2017
DRAFT
EUROPEAN STANDARD
prEN 13707
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2017
ICS 01.040.91; 91.100.50 Will supersede EN 13707:2013
English Version
Flexible sheets for waterproofing - Reinforced bitumen
sheets for roof waterproofing - Definitions and
characteristics
Abdichtungsbahnen - Bitumenbahnen mit
Trägereinlage für Dachabdichtungen - Definitionen
und Eigenschaften
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 254.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13707:2017 E
worldwide for CEN national Members.

oSIST prEN 13707:2017
prEN 13707:2017 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 System-related characteristics . 8
5 Product characteristics . 8
5.1 General . 8
5.2 Characteristics . 8
5.2.1 Visible defects . 8
5.2.2 Dimensions, tolerances and mass per unit area . 9
5.2.3 Water tightness . 9
5.2.4 Effects of water . 9
5.2.5 Fire performance . 9
5.2.6 Resistance to hail . 10
5.2.7 Water tightness after stretching at low temperature . 10
5.2.8 Joint strength . 10
5.2.9 Water vapour properties. 11
5.2.10 Tensile properties. 11
5.2.11 Resistance to impact . 11
5.2.12 Resistance to static loading . 11
5.2.13 Resistance to tearing (nail shank) . 11
5.2.14 Resistance to root penetration . 11
5.2.15 Dimensional stability . 11
5.2.16 Form stability under cyclic temperature change . 11
5.2.17 Flexibility at low temperature (pliability) . 11
5.2.18 Flow resistance at elevated temperature . 12
5.2.19 Artificial ageing behaviour . 12
5.2.20 Adhesion of granules . 12
5.3 Dangerous substances . 13
6 Assessment and verification of the constancy of performance – AVCP . 13
6.1 General . 13
6.2 Type testing . 13
6.2.1 General . 13
6.2.2 Test samples, testing and compliance criteria . 14
6.2.3 Test reports . 14
6.2.4 Shared other party results . 14
6.3 Factory production control (FPC) . 15
6.3.1 General . 15
6.3.2 Requirements . 15
6.3.3 Product specific requirements . 17
6.3.4 Initial inspection of factory and of FPC . 18
6.3.5 Continuous surveillance of FPC . 18
6.3.6 Procedure for modifications . 18
6.3.7 One-off products, pre-production products (e.g. prototypes) and products produced
in very low quantity . 19
oSIST prEN 13707:2017
prEN 13707:2017 (E)
7 Labelling and packing . 19
Annex A (normative) Applicability of characteristics . 20
Annex B (normative) Frequencies of testing for factory production control . 22
Annex C (informative) Information about chemical resistance . 24
Annex D (normative) Standard Test Built up Broof (t1) — Insulated Standard Test Built up . 27
Annex E (informative) Example of information from testing . 28
Annex F (informative) Wind-uplift properties of mechanically fixed bituminous membranes
— General information . 30
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No.305/2011 . 31
ZA.1 Scope and relevant characteristics . 31
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 32
ZA.3 Assignment of AVCP tasks . 32
Bibliography . 36

oSIST prEN 13707:2017
prEN 13707:2017 (E)
European foreword
This document (prEN 13707:2017) has been prepared by Technical Committee CEN/TC 254 “Flexible
sheets for waterproofing”, the secretariat of which is held by NEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13707:2013.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Regulation 305/2011.
For relationship with EU Regulation 305/2011, see informative Annex ZA, which is an integral part of
this document.
The main technical changes that have been made in this new edition are as follows:
a) Subclause 5.2.5 Fire performance has been modified;
b) the wording and Annex ZA have been adapted to the CPR.
oSIST prEN 13707:2017
prEN 13707:2017 (E)
1 Scope
This draft European Standard specifies definitions and characteristics for flexible reinforced bitumen
sheets for which the intended use is roofing. This covers sheets used as top layers, intermediate layers
and underlayers.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 1107-1, Flexible sheets for waterproofing — Part 1: Bitumen sheets for roof waterproofing —
Determination of dimensional stability
EN 1108, Flexible sheets for waterproofing — Bitumen sheets for roof waterproofing — Determination of
form stability under cyclical temperature changes
EN 1109, Flexible sheets for waterproofing — Bitumen sheets for roof waterproofing — Determination of
flexibility at low temperature
EN 1110, Flexible sheets for waterproofing — Bitumen sheets for roof waterproofing — Determination of
flow resistance at elevated temperature
CEN/TS 1187:2012, Test methods for external fire exposure to roofs
EN 1296, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roofing — Method of
artificial ageing by long term exposure to elevated temperature
EN 1297, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof
waterproofing — Method of artificial ageing by long term exposure to the combination of UV radiation,
elevated temperature and water
EN 1848-1, Flexible sheets for waterproofing — Determination of length, width and straightness — Part
...