EN 14939:2006
(Main)Copper and copper alloys - Determination of beryllium content - FAAS method
Copper and copper alloys - Determination of beryllium content - FAAS method
This European Standard specifies a flame atomic absorption spectrometric method (FAAS) for the determination of the beryllium content of copper and copper alloys in the form of unwrought, wrought and cast products.
The method is applicable to products having beryllium mass fractions between 0,01 % and 3,0 %.
Kupfer und Kupferlegierungen - Bestimmung des Berylliumgehaltes - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS)
Diese Europäische Norm legt ein flammenatomabsorptionsspektrometrisches Verfahren (FAAS) für die Bestimmung des Berylliumgehaltes in Kupfer und Kupferlegierungen fest, die als Gussstücke oder als plastisch oder nicht plastisch geformte Produkte vorliegen.
Das Verfahren ist geeignet für Produkte mit Beryllium-Massenanteilen zwischen 0,01 % und 3,0 %.
Cuivre et alliages de cuivre - Dosage du béryllium - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)
La présente Norme européenne spécifie une méthode par spectrométrie d’absorption atomique dans la flamme (SAAF) pour le dosage du béryllium dans le cuivre et les alliages de cuivre sous la forme de produits non corroyés, corroyés et coulés.
La méthode s’applique aux produits ayant des teneurs en béryllium comprises entre 0,01 % et 3,0 %.
Baker in bakrove zlitine – Določevanje berilija – Metoda FAAS
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Copper and copper alloys - Determination of beryllium content - FAAS methodCuivre et alliages de cuivre - Dosage du béryllium - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)Kupfer und Kupferlegierungen - Bestimmung des Berylliumgehaltes - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS)Ta slovenski standard je istoveten z:EN 14939:2006SIST EN 14939:2006en77.120.30ICS:SLOVENSKI
STANDARDSIST EN 14939:200601-september-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14939June 2006ICS 77.120.30 English VersionCopper and copper alloys - Determination of beryllium content -FAAS methodCuivre et alliages de cuivre - Dosage du béryllium -Méthode par spectrométrie d'absorption atomique dans laflamme (SAAF)Kupfer und Kupferlegierungen - Bestimmung desBerylliumgehaltes -Flammenatomabsorptionsspektrometrisches Verfahren(FAAS)This European Standard was approved by CEN on 15 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14939:2006: E
EN 14939:2006 (E) 2
Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Reagents and materials.4 5 Apparatus.5 6 Sampling.6 7 Procedure.6 8 Expression of results.9 9 Precision.10 10 Test report.11 Bibliography.12
EN 14939:2006 (E)
3 Foreword This document (EN 14939:2006) has been prepared by Technical Committee CEN/TC 133 “Copper and copper al-loys”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn at the latest by December 2006. Within its programme of work, Technical Committee CEN/TC 133 requested CEN/TC 133/WG 10 "Methods of analysis" to prepare the following standard: EN 14939, Copper and copper alloys — Determination of beryllium content — FAAS method According to the CEN/CENELEC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.