EN 12926:2015

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev peroksodisulfatProdukte zur Aufbereitung von Wasser für den menschlichen Gebrauch - NatriumperoxodisulfatProduits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Peroxodisulfate de sodiumChemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate71.100.80Chemicals for purification of water13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 12926:2015SIST EN 12926:2015en,fr,de01-junij-2015SIST EN 12926:2015SLOVENSKI
STANDARDSIST EN 12926:20081DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12926
March 2015 ICS 71.100.80 Supersedes EN 12926:2008English Version
Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate
Produits chimiques pour le traitement de l'eau destinée à la consommation humaine - Peroxodisulfate de sodium
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Natriumperoxodisulfat This European Standard was approved by CEN on 20 December 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12926:2015 ESIST EN 12926:2015

..........................................................................................................................7 3.1.7 EINECS reference
.................................................................................................................................7 3.2 Commercial form ...................................................................................................................................7 3.3 Physical properties ................................................................................................................................7 3.3.1 Appearance and odour ..........................................................................................................................7 3.3.2 Density ....................................................................................................................................................7 3.3.3 Solubility in water ..................................................................................................................................7 3.3.4 Vapour pressure ....................................................................................................................................7 3.3.5 Boiling point at 100 kPa
.......................................................................................................................7 3.3.6 Melting point ...........................................................................................................................................7 3.3.7 Specific heat ...........................................................................................................................................7 3.3.8 Viscosity (dynamic) ...............................................................................................................................8 3.3.9 Critical temperature ...............................................................................................................................8 3.3.10 Critical pressure.....................................................................................................................................8 3.3.11 Physical hardness .................................................................................................................................8 3.4 Chemical properties ..............................................................................................................................8 4 Purity criteria ..........................................................................................................................................8 4.1 General ....................................................................................................................................................8 4.2 Composition of commercial product ...................................................................................................8 4.3 Impurities and main by-products .........................................................................................................8 4.4 Chemical parameters ............................................................................................................................8 5 Test methods ..........................................................................................................................................9 5.1 Sampling .................................................................................................................................................9 5.2 Analysis ..................................................................................................................................................9 5.2.1 General ....................................................................................................................................................9 5.2.2 Determination of sodium peroxodisulfate (main product) ................................................................9 5.2.3 Impurities ............................................................................................................................................. 11 5.2.4 Chemical parameters ......................................................................................................................... 11 6 Labelling – Transportation – Storage ............................................................................................... 13 6.1 Means of delivery ................................................................................................................................ 13 6.2 Labelling according to the EU Legislation
...................................................................................... 14 6.3 Transportation regulations and labelling ......................................................................................... 14 6.4 Marking ................................................................................................................................................ 14 6.5 Storage ................................................................................................................................................. 14 6.5.1 General ................................................................................................................................................. 14 6.5.2 Long term stability .............................................................................................................................. 14 6.5.3 Storage incompatibilities ................................................................................................................... 15 SIST EN 12926:2015

General information on sodium peroxodisulfate . 16 A.1 Origin . 16 A.1.1 Raw materials . 16 A.1.2 Manufacturing process . 16 A.2 Use . 16 A.2.1 Function. 16 A.2.2 Form in which it is used . 16 A.2.3 Treatment dose . 16 A.2.4 Means of application . 16 A.2.5 Secondary effects . 16 A.2.6 Removal of excess product . 16 Annex B (normative)
General rules relating to safety . 17 B.1 Rules for safe handling and use . 17 B.2 Emergency procedures . 17 B.2.1 First aid . 17 B.2.2 Spillage . 17 B.2.3 Fire . 17 Annex C (normative)
Determination of arsenic, antimony and selenium (atomic absorption spectrometry hydride technique) . 18 C.1 General principle . 18 C.2 Interferences . 18 C.3 Reagents. 18 C.4 Apparatus . 20 C.5 Procedure . 21 C.5.1 Preparation of the apparatus . 21 C.5.2 Preparation of calibration solutions . 22 C.5.3 Preparation of test solutions and standard solutions . 22 C.5.4 Determination of arsenic with sodium borohydride . 22 C.5.5 Determination of selenium with sodium borohydride . 22 C.5.6 Determination of antimony with sodium borohydride . 23 C.6 Calculation . 23 Bibliography . 24
...