EN 12697-34:2004
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test
Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test
This European Standard specifies a test method for determining the stability, flow and the Marshall Quotient values of specimens of bituminous mixtures mixed according to prEN 12697-35 and prepared using the impact compactor method of test EN 12697-30. It is limited to dense graded asphalt concrete and hot rolled asphalt.
Asphalt - Prüfverfahren für Heißasphalt - Teil 34: Marshall-Prüfung
Das Verfahren nach dieser Norm dient zur Bestimmung von Stabilität, Fließwert und Marshall-Quotient von Asphalt-Probekörpern nach prEN (WI 00227118), die mit dem Schlagverdichtungsverfahren der Prüfung prEN (WI 00227046) hergestellt wurden.
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 34: Essai Marshall
La présente Norme européenne spécifie une méthode d'essai pour déterminer la stabilité, le fluage et les valeurs du quotient Marshall des éprouvettes de mélanges bitumineux malaxés selon le prEN 12697-35 et compactés à l'aide d'un compacteur à impact selon la EN 12697-30. Elle est limitée aux bétons bitumineux denses et aux " hot rolled asphalt ".
Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 34. del: Preskus po Marshallu
General Information
- Status
- Withdrawn
- Publication Date
- 29-Jun-2004
- Withdrawal Date
- 03-Jul-2007
- Technical Committee
- CEN/TC 227 - Road materials
- Drafting Committee
- CEN/TC 227/WG 1 - Bituminous mixtures
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 04-Jul-2007
- Completion Date
- 04-Jul-2007
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 19-Jan-2023
Frequently Asked Questions
EN 12697-34:2004 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test". This standard covers: This European Standard specifies a test method for determining the stability, flow and the Marshall Quotient values of specimens of bituminous mixtures mixed according to prEN 12697-35 and prepared using the impact compactor method of test EN 12697-30. It is limited to dense graded asphalt concrete and hot rolled asphalt.
This European Standard specifies a test method for determining the stability, flow and the Marshall Quotient values of specimens of bituminous mixtures mixed according to prEN 12697-35 and prepared using the impact compactor method of test EN 12697-30. It is limited to dense graded asphalt concrete and hot rolled asphalt.
EN 12697-34:2004 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12697-34:2004 has the following relationships with other standards: It is inter standard links to EN 12697-34:2004+A1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12697-34:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12697-34:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall testMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 34: Essai MarshallAsphalt - Prüfverfahren für Heißasphalt - Teil 34: Marshall-PrüfungTa slovenski standard je istoveten z:EN 12697-34:2004SIST EN 12697-34:2004en93.080.20Materiali za gradnjo cestRoad construction materialsICS:SLOVENSKI
STANDARDSIST EN 12697-34:200401-september-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-34June 2004ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part34: Marshall testMélanges bitumineux - Méthodes d'essai pour mélangehydrocarboné à chaud - Partie 34: Essai MarshallAsphalt - Prüfverfahren für Heißasphalt - Teil 34: Marshall-PrüfungThis European Standard was approved by CEN on 1 April 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-34:2004: E
Marshall quotient.10 Annex B (normative)
Testing head.11 Bibliography.12
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...