EN 12848:2009
(Main)Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions
Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions
This European Standard specifies a method for the determination of mixing stability of bitumen emulsions with cement. It applies to overstabilized cationic bitumen emulsions and to slow-setting and overstabilized anionic bitumen emulsions.
WARNING — The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Mischstabilität von Bitumenemulsionen mit Zement
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Mischstabilität von Bitumenemulsionen mit
Zement fest. Sie ist auf überstabilisierte kationische Bitumenemulsionen und auf langsam abbindende und
überstabilisierte anionische Bitumenemulsionen anwendbar.
WARNUNG — Die Anwendung dieser Norm kann den Umgang mit gefährlichen Substanzen und Ausrüstungsteilen
und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Norm erhebt nicht
den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in
der Verantwortung des Anwenders dieser Norm, geeignete Verhaltensregeln für den Arbeits- und
Gesundheitsschutz festzulegen und vor der Anwendung zu klären, ob einschränkende Vorschriften zu
berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de la stabilité des émulsions de bitume en mélange avec du ciment
La présente norme européenne spécifie une méthode de détermination de la stabilité des émulsions de
bitume en mélange avec du ciment. Elle s’applique aux émulsions cationiques surstabilisées et aux émulsions
anioniques lentes et surstabilisées.
AVERTISSEMENT — L'utilisation de la présente Norme européenne peut impliquer l'intervention de
produits, d'opérations et d'équipements à caractères dangereux. La présente Norme européenne n'est
pas censée aborder tous les problèmes de sécurité associés à son usage. Il est de la responsabilité
de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de
déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje stopnje stabilnosti bitumenskih emulzij z mešanjem s cementom
General Information
- Status
- Published
- Publication Date
- 24-Mar-2009
- Withdrawal Date
- 29-Sep-2009
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336/WG 2 - Emulsions and fluxed bitumens
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 25-Nov-2025
- Completion Date
- 03-Dec-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Overview
EN 12848:2009 is a European Standard developed by the European Committee for Standardization (CEN) that specifies a method to determine the mixing stability of bituminous emulsions with cement. This standard applies particularly to overstabilized cationic bituminous emulsions as well as to slow-setting and overstabilized anionic bituminous emulsions. The method provides a systematic approach to assess the compatibility and stability when bitumen emulsions are mixed with cement, which is crucial for various construction and road-building applications.
This standard replaces EN 12848:2002 and offers a reliable procedure widely accepted across Europe for quality control and consistency assurance in bitumen-cement mixtures.
Key Topics
Scope and Application
EN 12848:2009 is intended for determining the mixing stability of bituminous emulsions when combined with cement. It applies to specific types of bitumen emulsions including overstabilized cationic and slow-setting or overstabilized anionic emulsions.Testing Principle
The method involves mixing a measured amount of bituminous emulsion with cement under controlled laboratory conditions. The mixture is filtered through defined sieves and the retained solids are weighed after drying to quantify coagulated material.Materials and Apparatus
- Portland cement CEM I, type R (according to EN 197-1)
- Stainless steel or brass sieves with mesh sizes of 2.0 mm and 0.16 mm
- Standard laboratory equipment including ovens, balances, and stirring rods
- Use of reagents and water adhering to EN ISO 3696 standards for analytical quality
Testing Procedure
The procedure includes:- Preparation and sieving of cement
- Weighing and mixing cement with bituminous emulsion and water
- Sieving the mixture and drying retained material
- Calculating the mixing stability value based on the dry weight of coagulated material
Precision and Repeatability
The standard specifies precision limits:- Repeatability limit: ±0.2 g (same operator, same apparatus)
- Reproducibility limit: ±0.4 g (different operators and laboratories)
Safety
The standard highlights that working with bituminous emulsions and cement involves hazardous materials and operations. Users must implement appropriate safety practices and comply with relevant regulations.
Applications
EN 12848:2009 is essential for quality control and performance evaluation in industries where bitumen emulsions and cement are combined, such as:
Road Construction and Maintenance
Ensuring stable mixtures of bituminous emulsions with cement helps in the production of durable, high-performance asphalt and repair materials.Waterproofing and Sealing
Evaluating mixing stability is critical for manufacturing sealing compounds and protective coatings combining bituminous binders and cementitious materials.Civil Engineering Projects
Mixing stability tests aid in optimizing formulations for stabilization of soils or bases using cement and bituminous emulsions.
This standard helps manufacturers, testing laboratories, and construction companies ensure the integrity and consistency of mixtures, thus enhancing the longevity and performance of construction materials.
Related Standards
For comprehensive testing and compliance workflows, EN 12848:2009 is commonly used alongside:
- EN 58 – Sampling of bitumen and bituminous binders
- EN 197-1 – Composition and conformity criteria for common Portland cements
- EN 12594 – Preparation of bituminous binder test samples
- EN ISO 3696 – Specification and test methods for water for analytical use
- EN ISO 4259 – Petroleum products – Precision data and methods of test
- ASTM D6935 – Standard test method for cement mixing of emulsified asphalt (used in some non-European contexts)
Summary
EN 12848:2009 is a key European standard for testing the mixing stability of bituminous emulsions with cement, facilitating quality assurance and ensuring that bitumen-cement blends meet stringent performance criteria. Its internationally recognized method enhances consistency in construction and road materials involving bituminous binders, contributing to safer, longer-lasting infrastructure.
Frequently Asked Questions
EN 12848:2009 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions". This standard covers: This European Standard specifies a method for the determination of mixing stability of bitumen emulsions with cement. It applies to overstabilized cationic bitumen emulsions and to slow-setting and overstabilized anionic bitumen emulsions. WARNING — The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies a method for the determination of mixing stability of bitumen emulsions with cement. It applies to overstabilized cationic bitumen emulsions and to slow-setting and overstabilized anionic bitumen emulsions. WARNING — The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 12848:2009 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12848:2009 has the following relationships with other standards: It is inter standard links to EN 12848:2002. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12848:2009 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12848:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WXPHQVNLKBitumen und bitumenhaltige Bindemittel - Bestimmung der Mischstabilität von Bitumenemulsionen mit ZementBitumes et liants bitumineux - Détermination de la stabilité des émulsions de bitume en mélange avec du cimentBitumen and bituminous binders - Determination of mixing stability with cement of bituminous emulsions91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 12848:2009SIST EN 12848:2009en,fr,de01-julij-2009SIST EN 12848:2009SLOVENSKI
STANDARDSIST EN 12848:20031DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12848March 2009ICS 75.140; 91.100.50Supersedes EN 12848:2002
English VersionBitumen and bituminous binders - Determination of mixingstability with cement of bituminous emulsionsBitumes et liants bitumineux - Détermination de la stabilitédes émulsions de bitume en mélange avec du cimentBitumen und bitumenhaltige Bindemittel - Bestimmung derMischstabilität von Bitumenemulsionen mit ZementThis European Standard was approved by CEN on 17 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12848:2009: ESIST EN 12848:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...