EN 527-2:2002
(Main)Office furniture - Work tables and desks - Part 2: Mechanical safety requirements
Office furniture - Work tables and desks - Part 2: Mechanical safety requirements
This European Standard specifies the mechanical requirements for safety of office tables and desks.
Büromöbel - Büro-Arbeitstische - Teil 2: Mechanische Sicherheitsanforderungen
Dieser Teil der Europäischen Norm legt mechanische Sicherheitsanforderungen an Büro-Arbeitstische fest.
ANMERKUNG In der Englischen Fassung der Norm haben die Benennungen "table" und "desk" die gleiche Bedeutung und zur Vereinfachung wird dort im weiteren Verlauf der Norm nur noch die Benennung "table" verwendet.
Eine vergleichbare Norm ist für Büroschränke in Vorbereitung. Büro-Arbeitstische mit Registraturfunktionen sollten, wo anwendbar, beide Normen erfüllen.
Mobilier de bureau - Tables de travail de bureau - Partie 2: Exigences mécaniques de sécurité
La présente partie de cette Norme Européenne prescrit les exigences mécaniques de sécurité des tables de travail de bureau.
NOTE Dans la version anglaise, les termes " table " et " desk " ont la même signification. Pour une simplification, seul le terme " table "est utilisé.
Une norme similaire est en préparation pour les meubles de rangement. Il convient que les tables de travail de bureau incluant des éléments de rangement satisfassent les 2 normes lorsque cela s'applique.
Pisarniško pohištvo - Delovne mize in pisalne mize - 2. del: Mehanske varnostne zahteve
General Information
- Status
- Withdrawn
- Publication Date
- 01-Oct-2002
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 207 - Furniture
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-Dec-2016
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 527-2:2002 is a standard published by the European Committee for Standardization (CEN). Its full title is "Office furniture - Work tables and desks - Part 2: Mechanical safety requirements". This standard covers: This European Standard specifies the mechanical requirements for safety of office tables and desks.
This European Standard specifies the mechanical requirements for safety of office tables and desks.
EN 527-2:2002 is classified under the following ICS (International Classification for Standards) categories: 97.140 - Furniture. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 527-2:2002 has the following relationships with other standards: It is inter standard links to EN 527-2:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 527-2:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2003
Pisarniško pohištvo - Delovne mize in pisalne mize - 2. del: Mehanske varnostne
zahteve
Office furniture - Work tables and desks - Part 2: Mechanical safety requirements
Büromöbel - Büro-Arbeitstische - Teil 2: Mechanische Sicherheitsanforderungen
Mobilier de bureau - Tables de travail de bureau - Partie 2: Exigences mécaniques de
sécurité
Ta slovenski standard je istoveten z: EN 527-2:2002
ICS:
97.140 Pohištvo Furniture
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 527-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2002
ICS 97.140
English version
Office furniture - Work tables and desks - Part 2: Mechanical
safety requirements
Mobilier de bureau - Tables de travail de bureau - Partie 2: Büromöbel - Büro-Arbeitstische - Teil 2: Mechanische
Exigences mécaniques de sécurité Sicherheitsanforderungen
This European Standard was approved by CEN on 19 July 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 527-2:2002 E
worldwide for CEN national Members.
Contents
page
Foreword.3
1 Scope .3
2 Normative references .3
3 General design requirements .3
4 Structural safety requirements.4
4.1 Test sequence .4
4.2 Requirements for structural tests .4
4.3 Stability requirements .5
Annex A (informative) A–deviations.6
Foreword
This document EN 527-2:2002 has been prepared by Technical Committee CEN/TC 207 "Furniture", the
secretariat of which is held by IBN/BIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest by
April 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and the United Kingd
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...