EN 848-1:1998

EN 848-1:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines". This standard covers: This European Standard specifies the requirements and/or measures to remove the hazards and limit the risk on hand fed vertical spindle moulding machines, herein after referred to as "machines", designed to cut solid wood, chip board, fiberboard, plywood and also these materials where they are covered with plastic laminate or edgings. This European Standard covers all the hazards relevant to this machine. These hazards are listed in 4. This European Standard does not apply to machines set up on a bench or a table similar to a bench which are intended to carry out work in a stationary position and capable of being lifted by hand by one person. This European Standard does not apply to hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting and Numeric Control (NC). This European Standard is primarily applicable to machines which are manufactured after the date of issue of this standard. This European Standard does not apply to machines equipped with outboard bearings.

This European Standard specifies the requirements and/or measures to remove the hazards and limit the risk on hand fed vertical spindle moulding machines, herein after referred to as "machines", designed to cut solid wood, chip board, fiberboard, plywood and also these materials where they are covered with plastic laminate or edgings. This European Standard covers all the hazards relevant to this machine. These hazards are listed in 4. This European Standard does not apply to machines set up on a bench or a table similar to a bench which are intended to carry out work in a stationary position and capable of being lifted by hand by one person. This European Standard does not apply to hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting and Numeric Control (NC). This European Standard is primarily applicable to machines which are manufactured after the date of issue of this standard. This European Standard does not apply to machines equipped with outboard bearings.

EN 848-1:1998 is classified under the following ICS (International Classification for Standards) categories: 79.120.10 - Woodworking machines. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 848-1:1998 has the following relationships with other standards: It is inter standard links to EN 848-1:2007, EN 848-1:1998/A1:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 848-1:1998 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 848-1:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.