Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use

This European Standard applies to pin-index, yoke-type valve outlet connections for medical use, up to a maximum working pressure of 250 bar at 15 °C. These connections are for use with medical gas cylinders of water capacity below 5 l, for patient care, including therapeutic, diagnostic and prophylactic applications, in hospitals and for emergency treatment. It specifies: - basic dimensions; - requirements for alternative designs of pin-index, yoke-type valve connections; - dimension and positions for the holes and pins for the outlet connections for certain gases and gas mixtures.

Ortsbewegliche Gasflaschen - Ventilseitenstutzen mit Anschlußbügel nach dem Pin-index-System für medizinische Anwendung

Diese Europäische Norm gilt für Bügelverschlüsse nach dem Pin-Index System für die medizinische Anwendung, mit einem maximalen Fülldruck von 250 bar bei 15 °C. Diese Verschlüsse gelten für den medizinischen Gebrauch von Gasflaschen  mit weniger als 5 l Inhalt für die Krankenpflege, einschließlich therapeutischer, diagnostischer und prophylaktischer Anwendung, in Krankenhäusern und für Notfälle. Sie bestimmt: - Grundmaße; - Anforderungen für alternative Konstruktionen von Bügelventilverschlüssen; - Maße und Anordnungen der Paßlöcher und -stifte für die Auslaßverbindungen.

Bouteilles à gaz transportables - Raccords de sortie de robinets du type à étrier avec ergots de sécurité pour usage médical

Cette norme européenne s'applique aux raccords de sorties de robinets du type à étrier avec ergots de sécurité pour usage médical jusqu'à une pression de service maximale de 250 bar à 15 °C. Ces raccords de sorties sont utilisés pour les bouteilles à gaz médicaux, de contenance en eau inférieure à 5 l et, utilisés pour des soins aux malades comportant des applications thérapeutiques, diagnostiques et prophylactiques, dans les hôpitaux et pour les traitements d'urgence. Elle prescrit: - leurs dimensions de base.

Plinske jeklenke - Objemni nastavki ventila s sistemom pin-index za uporabo v medicini

General Information

Status
Withdrawn
Publication Date
23-Jul-1996
Withdrawal Date
31-Oct-2004
Drafting Committee
CEN/TC 23/SC 2 - Fittings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Nov-2004
Completion Date
01-Nov-2004

Relations

Effective Date
22-Dec-2008
Effective Date
09-Feb-2026
Effective Date
09-Feb-2026
Effective Date
09-Feb-2026
Effective Date
22-Dec-2008
Effective Date
22-Dec-2008

Get Certified

Connect with accredited certification bodies for this standard

Institut za varilstvo d.o.o. (Welding Institute)

Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au

SA Slovenia Verified

Sponsored listings

Frequently Asked Questions

EN 850:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use". This standard covers: This European Standard applies to pin-index, yoke-type valve outlet connections for medical use, up to a maximum working pressure of 250 bar at 15 °C. These connections are for use with medical gas cylinders of water capacity below 5 l, for patient care, including therapeutic, diagnostic and prophylactic applications, in hospitals and for emergency treatment. It specifies: - basic dimensions; - requirements for alternative designs of pin-index, yoke-type valve connections; - dimension and positions for the holes and pins for the outlet connections for certain gases and gas mixtures.

This European Standard applies to pin-index, yoke-type valve outlet connections for medical use, up to a maximum working pressure of 250 bar at 15 °C. These connections are for use with medical gas cylinders of water capacity below 5 l, for patient care, including therapeutic, diagnostic and prophylactic applications, in hospitals and for emergency treatment. It specifies: - basic dimensions; - requirements for alternative designs of pin-index, yoke-type valve connections; - dimension and positions for the holes and pins for the outlet connections for certain gases and gas mixtures.

EN 850:1996 is classified under the following ICS (International Classification for Standards) categories: 23.060.40 - Pressure regulators. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 850:1996 has the following relationships with other standards: It is inter standard links to EN ISO 407:2004, EN 60947-1:2004, EN 60519-1:2003, EN 60934:2001, EN 850:1996/A1:2000, EN 850:1996/AC:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 850:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-1999
Plinske jeklenke - Objemni nastavki ventila s sistemom pin-index za uporabo v
medicini
Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical
use
Ortsbewegliche Gasflaschen - Ventilseitenstutzen mit Anschlußbügel nach dem Pin-
index-System für medizinische Anwendung
Bouteilles a gaz transportables - Raccords de sortie de robinets du type a étrier avec
ergots de sécurité pour usage médical
Ta slovenski standard je istoveten z: EN 850:1996
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...