EN 13108-7:2006/AC:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Material specifications - Part 7: Porous AsphaltBitumenske zmesi - Specifikacije materialov - 7. del: Drenažni asfaltMélanges bitumineux - Spécification des matériaux - Partie 7: Bétons bitumineux drainantsAsphaltmischgut - Mischgutanforderungen - Teil 7: Offenporiger AsphaltTa slovenski standard je istoveten z:EN 13108-7:2006/AC:2008SIST EN 13108-7:2006/AC:2008en,fr,de93.080.20ICS:SLOVENSKI
STANDARDSIST EN 13108-7:2006/AC:200801-april-2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13108-7:2006/ACJanuary 2008Janvier 2008Januar 2008ICS 93.080.20English versionVersion FrançaiseDeutsche FassungBituminous mixtures - Material specifications - Part 7: Porous AsphaltMélanges bitumineux - Spécification desmatériaux - Partie 7: Bétons bitumineuxdrainantsAsphaltmischgut - Mischgutanforderungen -Teil 7: Offenporiger AsphaltThis corrigendum becomes effective on 30 January 2008 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 30 janvier 2008 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 30.Januar 2008 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13108-7:2006/AC:2008 D/E/F

4.2.2, 2nd paragraph
Replace "250/3300" with "250/330".
5.2.3, formula (1)
Replace
"d" with "a"
and the text below "where" with
"a
is the apparent particle density, in megagrams per cubic meter (Mg/m3), determined on the weighted mean of the total mineral fraction according to EN 1097-6.".
5.12
Replace the 1st paragraph with "When using paving grade bitumen, the maximum temperatures of the mixture, measured according to EN 12697-13, shall be lower than the upper limits of Table 13. The maximum temperature applies at any place in the plant. The minimum temperature of the asphalt mix at delivery shall be declared by the manufacturer.".
ZA.1, 5th paragraph
Add "clauses" after "applicable" to read "This annex … relevant applicable clauses.".
Table ZA.2, right column
Place 1e, 3f and 4g in the same line as in the neighbour column.
Table ZA.3a
Replace Table ZA.3a with the following:

system 2+ Tasks Content of the task Evaluation of conformity to apply Factory production control (F.P.C) Parameters related to all relevant characteristics of Table ZA.1 EN 13108-21 Initial type testing All relevant characteristics of Table ZA.1 EN 13108-20 Tasks for the manufacturer Initial type testing by a notified laboratory
Reaction to fire (only where intended to be used in an area subjected to reaction of fire regulations) 5.7 Initial inspection of factory and of F.P.C Parameters related to all relevant characteristics of Table ZA.1 EN 13108-21:2006, Annex B Tasks for the notified body Certification of F.P.C on the basis of Continuous surveillance, assessment and approval of F.P.C Parameters related to all relevant characteristics of Table ZA.1 EN 13108-21:2006, Annex B

4.2.2, 2ème alinéa
Remplacer "250/3300" par
...