EN 12846-2:2022
(Main)Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
This document specifies a method for the determination of the efflux time at 25 °C of petroleum cut-back and fluxed bituminous binders in seconds using an efflux viscometer. Alternative test temperatures are 40 °C, 50 °C and 60 °C.
WARNING - The use of this document involves hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Ausflusszeit mittels Ausflussviskosimeter - Teil 2: Verschnittene und gefluxte bitumenhaltige Bindemittel
Dieses Dokument legt ein Verfahren zur Bestimmung der Ausflusszeit in Sekunden von petrostämmig verschnittenen und gefluxten bitumenhaltigen Bindemitteln bei 25 °C unter Anwendung eines Ausflussviskosimeters fest. Alternative Prüftemperaturen sind 40 °C, 50 °C und 60 °C.
WARNUNG - Die Anwendung dieses Dokument schließt den Umgang mit gefährlichen Substanzen und Ausrüstungen sowie die Durchführung gefährlicher Arbeitsschritte ein. Dieses Dokument erhebt nicht den Anspruch, dass alle mit seiner Anwendung verbundenen Sicherheitsprobleme angesprochen werden. Es liegt in der Verantwortung des Anwenders dieses Dokuments, geeignete Vorsichtsmaßnahmen für den Arbeits- und Gesundheitsschutz zu treffen und die Anwendbarkeit einschränkender Vorschriften vor der Anwendung zu bestimmen.
Bitumes et liants bitumineux - Détermination du temps d'écoulement à l'aide d'un viscosimètre à écoulement - Partie 2 : Bitumes fluidifiés et fluxés
Le présent document spécifie une méthode de détermination du temps d’écoulement, en secondes, à 25 °C, des bitumes fluidifiés et fluxés, à l’aide d’un viscosimètre à écoulement. D’autres températures d’essai possibles sont 40 °C, 50 °C et 60 °C.
AVERTISSEMENT - L'utilisation de ce document peut impliquer le recours à des produits, des opérations et des équipements à caractère dangereux. Le présent document n'est pas censé aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de ce document d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje viskoznosti z iztočnim viskozimetrom - 2. del: Rezana in fluksirana bitumenska veziva
Ta dokument določa metodo za določanje časa iztoka naftnih rezanih in fluksiranih bitumenskih veziv pri 25 °C v sekundah z uporabo iztočnega viskozimetra. Alternativne preskusne temperature so 40 °C, 50 °C in 60 °C.
OPOZORILO: Pri uporabi tega dokumenta so prisotni nevarni materiali, postopki in oprema. Ta dokument ne obravnava vseh varnostnih težav, ki se navezujejo na njegovo uporabo. Za vzpostavitev ustreznih varnostnih in zdravstvenih praks ter za določitev uporabnosti regulativnih omejitev pred uporabo je odgovoren uporabnik tega dokumenta.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12846-2:2023
01-april-2023
Nadomešča:
SIST EN 12846-2:2011
Bitumen in bitumenska veziva - Določanje viskoznosti z iztočnim viskozimetrom -
2. del: Rezana in fluksirana bitumenska veziva
Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer -
Part 2: Cut-back and fluxed bituminous binders
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Ausflusszeit mittels
Ausflussviskosimeter - Teil 2: Verschnittene und gefluxte bitumenhaltige Bindemittel
Bitumes et liants bitumineux - Détermination du temps d'écoulement à l'aide d'un
viscosimètre à écoulement - Partie 2 : Bitumes fluidifés et fluxés
Ta slovenski standard je istoveten z: EN 12846-2:2022
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 12846-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12846-2:2023
---------------------- Page: 2 ----------------------
SIST EN 12846-2:2023
EN 12846-2
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN 12846-2:2011
English Version
Bitumen and bituminous binders - Determination of efflux
time by the efflux viscometer - Part 2: Cut-back and fluxed
bituminous binders
Bitumes et liants bitumineux - Détermination du temps Bitumen und bitumenhaltige Bindemittel -
d'écoulement à l'aide d'un viscosimètre à écoulement - Bestimmung der Ausflusszeit mittels
Partie 2 : Bitumes fluidifiés et fluxés Ausflussviskosimeter - Teil 2: Verschnittene und
gefluxte bitumenhaltige Bindemittel
This European Standard was approved by CEN on 21 November 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12846-2:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12846-2:2023
EN 12846-2:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 5
5 Reagents and materials . 5
6 Apparatus . 5
7 Sampling . 6
8 Procedure. 6
8.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.