EN 1176-3:1998/A1:2003

SLOVENSKI STANDARD
SIST EN 1176-3:2000/A1:2003
01-julij-2003
2SUHPDRWURãNLKLJULãþGHO'RGDWQHSRVHEQHYDUQRVWQH]DKWHYHLQSUHVNXVQH
PHWRGH]DWRERJDQH
Playground equipment - Part 3: Additional specific safety requirements and test methods
for slides
Spielplatzgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische Anforderungen
und Prüfverfahren für Rutschen
Equipements d'aires de jeux - Partie 3: Exigences de sécurité et méthodes d'essai
complémentaires spécifiques aux toboggans
Ta slovenski standard je istoveten z: EN 1176-3:1998/A1:2003
ICS:
97.200.40 ,JULãþD Playgrounds
SIST EN 1176-3:2000/A1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1176-3:2000/A1:2003

---------------------- Page: 2 ----------------------

SIST EN 1176-3:2000/A1:2003
EUROPEAN STANDARD
EN 1176-3:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2003
ICS 97.200.40
English version
Playground equipment - Part 3: Additional specific safety
requirements and test methods for slides
Equipements d'aires de jeux - Partie 3: Exigences de Spielplatzgeräte - Teil 3: Zusätzliche besondere
sécurité et méthodes d'essai complémentaires spécifiques sicherheitstechnische Anforderungen und Prüfverfahren für
aux toboggans Rutschen
This amendment A1 modifies the European Standard EN 1176-3:1998; it was approved by CEN on 9 January 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greec
...