prEN 12697-23

SLOVENSKI STANDARD
01-maj-2025
Bitumenske zmesi - Preskusne metode - 23. del: Ugotavljanje posredne natezne
trdnosti bitumenskih preskušancev
Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile
strength of bituminous specimens
Asphalt - Prüfverfahren - Teil 23: Bestimmung der indirekten Zugfestigkeit von Asphalt-
Probekörpern
Mélanges bitumineux - Méthode d'essais - Partie 23 : Détermination de la résistance à la
traction indirecte des éprouvettes bitumineuses
Ta slovenski standard je istoveten z: prEN 12697-23
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2025
ICS 93.080.20 Will supersede EN 12697-23:2017
English Version
Bituminous mixtures - Test methods - Part 23:
Determination of the indirect tensile strength of
bituminous specimens
Mélanges bitumineux - Méthode d'essais - Partie 23 : Asphalt - Prüfverfahren - Teil 23: Bestimmung der
Détermination de la résistance à la traction indirecte indirekten Zugfestigkeit von Asphalt-Probekörpern
des éprouvettes bitumineuses
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12697-23:2025 E
worldwide for CEN national Members.

Contents Page
European Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 5
5.1 Compression testing machine . 5
5.2 Testing head with loading strips . 5
5.3 Measuring device . 6
5.4 Water bath . 6
5.5 Soft plastic bags. 6
6 Sample preparation . 6
6.1 Number of specimen . 6
6.2 Dimensions of test specimen . 7
6.3 Visual examination . 7
6.4 Measurement of dimensions . 7
6.5 Age of Specimen . 7
7 Conditioning . 7
8 Test temperature . 8
9 Test procedure . 8
10 Calculation . 9
11 Test report . 9
12 Precision . 9

pEN 12697-23:2025 (E)
European Foreword
This document (prEN 12697-23:2025) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12697-23:2017.
EN 12697-23:2017:
— [Clause 5.3] the wording, “accuracy of ± 0,2 kN”, amended to read “nearest 0,1 kN with a maximum
permissible error of 0,2 kN”;
— [Clause 5.4] amended to read: “Water bath, thermostatically controlled, or air chamber, capable of
maintaining the temperature in the vicinity of the specimen within ± 1 °C from the test temperature.”
— [Clause 7]. Subclause 7.1 and 7.2 deleted and merged under Clause 7. Completion with following
paragraph: “Bring the test specimen to the selected test temperature selected according to Clause 8
with a maximum permissible error of 1 °C. “;
— [Clause 8] deletion of 1st paragraph: “Unless defined elsewhere, the test temperature shall be (10 ±
2) °C. Replaced by: “The test temperature shall be selected between +5 °C to +25 °C”;
— [Clause 8], 2nd paragraph. Last two sentences deleted. 1st sentence reworded to NOTE;
— [Clause 9.1] Deletion of paragraph: “The testing machine shall be placed in a room with temperature
between 15 °C and 25 °C.;
— [Clause 10] Rounding of ITS changed to the nearest kPa instead of three significant figures.
1 Scope
This document specifies a test method for determining the (splitting) indirect tensile strength of
cylindrical specimens of bituminous mixtures.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12697-27, Bituminous mixtures - Test methods - Part 27: Sampling
EN 12697-29, Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a
bituminous specimen
EN 12697-30, Bituminous mixtures - Test methods - Part 30: Specimen preparation by impact compactor
EN 12697-31, Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor
EN 12697-32, Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor
EN 12697-33, Bituminous mixtures — Test methods — Part 33: Specimen prepared by roller compactor
EN 12697-34, Bituminous mixtures - Test methods - Part 34: Marshall test
3 Terms and definitions
For the purposes of this document, the following terms an
...